locky Posted May 13, 2021 Share Posted May 13, 2021 22 minutes ago, Fuzzock said: I would tend to agree with you on this, but as I can't get spares to replace them it is either this or replace them. 😪 Any suggestions for Big Bore 1/8th shocks that are easily (ish) available? Ian... I've used these and they are good quality...https://www.ebay.co.uk/itm/284251494120?hash=item422eb596e8:g:v54AAOSwBehgcI9d Quote Link to comment Share on other sites More sharing options...
Paul Busby Posted May 13, 2021 Share Posted May 13, 2021 22 hours ago, Fuzzock said: Cleaned the shock of Hyper 7 that I broke at the weekend ready for gluing tomorrow (Hopefully) Ian... Could maybe try to print one? Questionable how much punishment it would take, but probably more than a glued part Speaking of which, I have been very quiet on the 3D printed parts front as i have been doing a bit of an overhaul on my printer. Installed a redesigned carriage with a far more efficient hot end, pulled all the sides off and re-organised the cables, changed some fans... with doing a full time job it's taken some time. I can say that it was absolutely worth it though. Just printed a part off in PA12-CF15 (Nylon with 15% carbon) and it's better than anything I have done with similar filmanets in the past. So I'm back in the game... @.AJ. - Again, I'll have to let you know how it holds up 😄 2 Quote Link to comment Share on other sites More sharing options...
Popular Post Fly In My Soup Posted May 13, 2021 Popular Post Share Posted May 13, 2021 (edited) Painted it Edited May 13, 2021 by Fly In My Soup 10 Quote Link to comment Share on other sites More sharing options...
Paul Busby Posted May 13, 2021 Share Posted May 13, 2021 Just now, Fly In My Soup said: Painted it That's Superb mate, need to go and check out the next vid int he series. 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Redback Posted May 14, 2021 Popular Post Share Posted May 14, 2021 (edited) Something snuck into my old Losi XXL LST. It's a propper bodge job 😆 So figured i'd document how it goes. Edited May 14, 2021 by Redback 6 Quote Link to comment Share on other sites More sharing options...
capri-boy Posted May 14, 2021 Share Posted May 14, 2021 On 12/05/2021 at 21:44, dazp1976 said: Fitted your last?. Why?. Do you keep breaking them?. If you have a broken one (or any other metal bits) that's measurable / copyable. I might take a look at it. A couple of months and my new cnc project should be finished, or close to it. Been out of rc (and most things) for a long while lately (medical). Last as in can't get anymore - though tbf this is the last CR Pro buggy that's been awaiting conversion - I do have some non Pro's though. Will consider it thanks Quote Link to comment Share on other sites More sharing options...
Popular Post tanveer Posted May 14, 2021 Popular Post Share Posted May 14, 2021 Today I blew up my revo 3.3😢, full speed pass and the cooling head shoots off into the air and the engine stalled. Looks like its time to upgrade the engine😂 2 5 2 3 Quote Link to comment Share on other sites More sharing options...
.AJ. Posted May 14, 2021 Share Posted May 14, 2021 Proper carnage mate! 1 Quote Link to comment Share on other sites More sharing options...
walkbythesea Posted May 14, 2021 Share Posted May 14, 2021 1 hour ago, tanveer said: Today I blew up my revo 3.3😢, full speed pass and the cooling head shoots off into the air and the engine stalled. Looks like its time to upgrade the engine😂 Did that proper - I always prefer a spectacular failure to something just breaking 1 1 Quote Link to comment Share on other sites More sharing options...
Popular Post walkbythesea Posted May 14, 2021 Popular Post Share Posted May 14, 2021 The chassis rail stage always feels like progress 😃 8 Quote Link to comment Share on other sites More sharing options...
tanveer Posted May 14, 2021 Share Posted May 14, 2021 3 hours ago, walkbythesea said: Did that proper - I always prefer a spectacular failure to something just breaking It was spectacular indeed😂 gives me an excuse to buy a new engine 1 1 Quote Link to comment Share on other sites More sharing options...
Redback Posted May 15, 2021 Share Posted May 15, 2021 (edited) 6 hours ago, tanveer said: It was spectacular indeed😂 gives me an excuse to buy a new engine Shame about your motor, did it land on its head and it snap off or did it just blow off the top? Good excuse to go brushless perhapse 😁 On that more on the nitro to brushless LST adventure. Tweaks to the LST Brushless conversion, should be more reliable then the bodge job belt drive as neat as it was when it worked. Wont bore with the details here, up dated the thread for those intrested. Running video tomorrow 🙂 Edited May 15, 2021 by Redback 3 Quote Link to comment Share on other sites More sharing options...
turok007 Posted May 15, 2021 Share Posted May 15, 2021 1 hour ago, Redback said: Shame about your motor, did it land on its head and it snap off or did it just blow off the top? Good excuse to go brushless perhapse 😁 On that more on the nitro to brushless LST adventure. Tweaks to the LST Brushless conversion, should be more reliable then the bodge job belt drive as neat as it was when it worked. Wont bore with the details here, up dated the thread for those intrested. Running video tomorrow 🙂 Is that a big pinion or just a average size for brushless. Quote Link to comment Share on other sites More sharing options...
Redback Posted May 15, 2021 Share Posted May 15, 2021 7 hours ago, turok007 said: Is that a big pinion or just a average size for brushless. Its way over sized, 14t - 20t would be the range the nitro motor used. Need another mount to use the right size pinion, however motor should be powerful enough to shift it even with the massive pinion. 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Yrkoon Posted May 15, 2021 Popular Post Share Posted May 15, 2021 over the last 2 days done some needed maintenance, the bandit xl5 has never had its gear box opened since i bought it probably over ten years ago so gave that a good clean and regreased. then yesterday done some maintenance on the dc 1 and finally changed the bent steering linkage lol then it was time to go on an adventure with it 🙂 then afterwards i came home and managed to strip the spur gear on my tt-01 lol 8 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Stormbringer Posted May 15, 2021 Popular Post Share Posted May 15, 2021 Yep we had a good day lol 2 3 Quote Link to comment Share on other sites More sharing options...
Popular Post walkbythesea Posted May 15, 2021 Popular Post Share Posted May 15, 2021 More chassis building for Krystal, getting close! 5 Quote Link to comment Share on other sites More sharing options...
Popular Post danny boy Posted May 15, 2021 Popular Post Share Posted May 15, 2021 (edited) More of a what did I do for my model today. I turned a broken computer monitor in a light panel for photographing my models. Tore the screen apart and installed some super bright pure white LEDs to give a very nice soft daylight like glow. So now even in a pitch black room I can still have pure "daylight" for my images. Edited May 15, 2021 by danny boy 7 Quote Link to comment Share on other sites More sharing options...
walkbythesea Posted May 15, 2021 Share Posted May 15, 2021 6 minutes ago, danny boy said: More of a what did I do for my model today. I turned a broken computer monitor in a light panel for photographing my models. Tore the screen apart and installed some super bright pure white LEDs to give a very nice soft daylight like glow. So now even in a pitch black room I can still have pure "daylight" for my images. That’s really very cool indeed! 😎👌 Quote Link to comment Share on other sites More sharing options...
Popular Post Redback Posted May 15, 2021 Popular Post Share Posted May 15, 2021 Big truck to be popping wheelies on 3s. Runs like a dream. 5 Quote Link to comment Share on other sites More sharing options...
tanveer Posted May 15, 2021 Share Posted May 15, 2021 16 hours ago, Redback said: Shame about your motor, did it land on its head and it snap off or did it just blow off the top? Good excuse to go brushless perhapse 😁 On that more on the nitro to brushless LST adventure. Tweaks to the LST Brushless conversion, should be more reliable then the bodge job belt drive as neat as it was when it worked. Wont bore with the details here, up dated the thread for those intrested. Running video tomorrow 🙂 Noo would never do such a thing, I absolutely love the revo 3.3 and really hooked on the nitro atm. The noise and whole experience brings back memories from being a kid. I have other brushless rc's for when I want the performance and ease of use. Quote Link to comment Share on other sites More sharing options...
Popular Post Lone-wolf Posted May 15, 2021 Popular Post Share Posted May 15, 2021 Built an fpv camera pod for my Ranger G2 1200, this nice steady plane will get me confident with just looking at a live camera view 5 Quote Link to comment Share on other sites More sharing options...
Popular Post Fuzzock Posted May 15, 2021 Popular Post Share Posted May 15, 2021 Back together But not for long 😉 (Needed to make a copy of my carbon ESC mount for my ST. In.... 6 Quote Link to comment Share on other sites More sharing options...
Popular Post Yrkoon Posted May 15, 2021 Popular Post Share Posted May 15, 2021 dad and i went up the quarry earlier and had a blast, i took my converted hyper 7 and my hyper vse 🙂 group pic dads hyper st conversion dads hyper 7 conversion and another of his hyper 7 his nut job kronos there were many breakages but none to my hyper vse although i did break my hyper 7 wing and then broke the wing mount and bent my back shock tower lol it is fully functional though 🙂 dads kronos didnt like the big boulder he hit 😛 good fun day 🙂 6 2 Quote Link to comment Share on other sites More sharing options...
tomr Posted May 15, 2021 Share Posted May 15, 2021 18 minutes ago, Yrkoon said: dad and i went up the quarry earlier and had a blast, i took my converted hyper 7 and my hyper vse 🙂 group pic dads hyper st conversion dads hyper 7 conversion and another of his hyper 7 his nut job kronos there were many breakages but none to my hyper vse although i did break my hyper 7 wing and then broke the wing mount and bent my back shock tower lol it is fully functional though 🙂 dads kronos didnt like the big boulder he hit 😛 good fun day 🙂 Nice seeing the conversions running sweet 👍 Poor Konos got its front teeth knocked out 🤕 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.