Jump to content

walkbythesea

Members
  • Posts

    1,582
  • Joined

  • Last visited

  • Days Won

    27

Everything posted by walkbythesea

  1. No I was selling mine but it’s long gone now
  2. As per the title, what are the differences and abilities of the Tamiya Teu-101bk vs Hobbywing 1060 - I’m just about to start a build that has a Teu-101bk in the box whereas I’m more used to the 1060
  3. I mean next time around, with the new stuff
  4. I’d connect it all up without the motor fully fitted in the car to test it next time around
  5. Have you checked that the drive train is completely free moving without a motor installed? A transmission that is bound will draw more amps and could potentially blow the ESC I guess - but not with it switched off
  6. Shouldn’t have that I can see - my gut feel is a faulty 1060 ESC which is super rare but not impossible
  7. Wiring and jumpers all look good, I’d just tidy it up a bit more myself, but it’s all correct
  8. Does everything in the transmission turn freely with no binding? Have you had the motor out at all, could you have meshed the gears too tightly when you put it back in? It’s possible that the motor may be damaged - a bad motor can sometimes turn with no load on it but as soon as you fit wheels and expect it to go it doesn’t have the torque to work.
  9. Does everything in the transmission turn freely with no binding? Have you had the motor out at all, could you have meshed the gears too tightly when you put it back in? It’s possible that the motor may be damaged - a bad motor can sometimes turn with no load on it but as soon as you fit wheels and expect it to go it doesn’t have the torque to work.
  10. A new 1060 is unlikely to be non-functional but it’s not impossible, more likely a bad motor wire or a dead motor.
  11. After 5pm I can photograph everything you’d need to know, if that helps, as I have it all at home
  12. Do you have the ability to post pictures of all your connections in the car - where the leads are plugged into the receiver, motor wires etc? You’ve not turned the throttle off by accident on the controller with the dial under the flap? As long as it all looks correctly connected - for the sake of experimentation it’s worth swapping the servo and ESC connections in your receiver to see what happens - obviously the throttle trigger should now turn the wheels and the wheel operate the throttle - what happens for you?
  13. £250 or sensible offer posted, the bare kit alone was £250 Freshly built, run once, I simply own too many things and need to focus elsewhere - it’s just sat in my garage since I built it. Etronix radio 1060 ESC Holmes Crawlmaster 5slot 16t 25kg servo Fancy Rostyle wheels, weighted - handles great. Happy to pull out electronics and negotiate if you want, I’m very flexible 👍
  14. Hobao Hyper 7 Brushless Conversion for spares or repair. The chassis is in great condition with the motor mount, steering servo and battery tray all included. This is a fast and very tough buggy with the right motor installed, I ran it on 4s and it was a real laugh. The battery pictured is only available by separate agreement to a buyer that collects in person. It’s a great buggy but having run it a bit I’ve realised that my interests really lie elsewhere. The body is functional with the aid of duct tape but is in generally poor condition. 4 road wheels and nearly new tyres included, needing to be fitted and glued, 2 reasonable off road wheels included and two in need of new tyres fitting. Spare set of shocks included but not pictured. Hobao Pro CNC front hubs included, RHS installed, LHS bagged with car. Starting price is less than the pro hubs alone, grab a bargain! Collection in person preferred, delivery available by Royal Mail Special Delivery. A good used 6000mah 4s battery (pictured) will be available for a sensible price to any buyer collecting in person. Opening bid on Ebay is £40 or message me an offer, postage is £15.45 https://www.ebay.co.uk/itm/134564683950
  15. I'm looking for parts to keep my old girl racing, anything considered, what have you got?
  16. Complete outfit brand new in box, I fancied myself as a model helicopter pilot and ordered all the gear, then found out how hard it is and frightened myself out of it - I’ve never even turned it on! Top of the range with fancy grips and hall gimbals, all accessories included and never unwrapped. Correct rechargeable battery for the transmitter is not pictured but will be included. Collection in person preferred but delivery via Royal Mail Special Delivery is available. Take advantage of my fears and grab yourself a bargain! (There’s a BNIB helicopter for sale below too) £225 ono, postage £11.15 Complete RC helicopter kit BNIB and ready to fly with a suitable controller (above), no controller included but see my other listings. 5 batteries - 2 x OMPHOBBY 650mah, 3 x aftermarket 720mah, 4 x battery sleds and straps, spare rotor blades and other parts, OSHM2055 satellite receiver included. Also brand new “training” undercarriage will be included. Never flown, I fancied myself as a model pilot but then found out how difficult it is and scared myself out of it! Take advantage of my fears and grab yourself a bargain! Collection preferred but delivery can be arranged by Road Mail Special Delivery £300 ono, postage £8.95 Or make me an offer for the pair 👍
  17. I'll take a punt on that, does that include postage? Drop me a message and we'll sort it out 👍
  18. I agree 100% with this, I use 1060’s in my M series racers and vintage 1/10’s which is why I’d be prepared to swap it with you for a more suitable system. But if you’ve not bought the 1060 yet then put the money into something better.
  19. One of these: https://www.modelsport.co.uk/product/etronix-photon-21w-system-with-130r-2950kv-motor-45a-esc-383631
  20. If you’ve already ordered that 1060 I would be prepared to swap you that when it gets delivered for a good secondhand complete Etronix brushless system from an FTX Carnage I’m dismantling, it’ll bolt straight in for you. Message me if you’re interested.
  21. Interested in other 959 parts too, to keep it running, what do you have?
  22. What spares do you have? Enough to convert my brushless converted Hyper7 back again?
×
×
  • Create New...