Popular Post .AJ. Posted April 3, 2022 Popular Post Share Posted April 3, 2022 This afternoon’s little project… I picked up a cheapo (£8) alloy steering set up for the Summit, the plan is to only use the dual arm to get rid of the flexible stock part, also I’ve always thought that metal on metal contact is never a good recipe for a consistently working servo saver. Plus the stock front part is pretty beefy and doesn’t really need replacing imo…. Chop chop I’ll give it a coat of paint before fitting 👍 5 Quote Link to comment Share on other sites More sharing options...
Kpowell911 Posted April 3, 2022 Share Posted April 3, 2022 37 minutes ago, .AJ. said: This afternoon’s little project… I picked up a cheapo (£8) alloy steering set up for the Summit, the plan is to only use the dual arm to get rid of the flexible stock part, also I’ve always thought that metal on metal contact is never a good recipe for a consistently working servo saver. Plus the stock front part is pretty beefy and doesn’t really need replacing imo…. Chop chop I’ll give it a coat of paint before fitting 👍 STRC (used to?) Make a single Alloy one for the E Revo 1.0 Im looking to pick up. However, Im trying to stop “upgrading” RCs and using the money to own more, break then upgrade is my new motto 1 Quote Link to comment Share on other sites More sharing options...
.AJ. Posted April 3, 2022 Share Posted April 3, 2022 2 hours ago, Kpowell911 said: STRC (used to?) Make a single Alloy one for the E Revo 1.0 Im looking to pick up. However, Im trying to stop “upgrading” RCs and using the money to own more, break then upgrade is my new motto Flip your Summit, grab a wheel and steer it, mine was like a wet noodle, this plus a washer in the servo saver is a game changer when running a big kg servo 👍 Ive seen the STRC one, but it would be £25+ with shipping 2 Quote Link to comment Share on other sites More sharing options...
Stormbringer Posted April 3, 2022 Share Posted April 3, 2022 Looking really good mate 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Blast and Cruise Posted April 3, 2022 Popular Post Share Posted April 3, 2022 (edited) Got this very old Tamiya up and Running......................... needed some basic Bits + Esc was playing up, but all sorted..... its nice to see her fully functional now. Edited April 3, 2022 by Blast and Cruise 13 Quote Link to comment Share on other sites More sharing options...
Popular Post Redback Posted April 3, 2022 Popular Post Share Posted April 3, 2022 (edited) Changed some motors around and went for a little crawl. AXE 550 3300kv fits into the highrock with custom mount like a treat, got some wheel speed now! Edited April 3, 2022 by Redback 4 9 Quote Link to comment Share on other sites More sharing options...
Stormbringer Posted April 3, 2022 Share Posted April 3, 2022 A swinging time was had 1 1 Quote Link to comment Share on other sites More sharing options...
LunsfordRich Posted April 3, 2022 Share Posted April 3, 2022 I didn’t break it! 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Hell horn. Posted April 3, 2022 Popular Post Share Posted April 3, 2022 Sorted a battery/esc/rx mount. Almost done. Just need to add a little bit more to a few spots to help with stress. 5 Quote Link to comment Share on other sites More sharing options...
Stevelyt Posted April 4, 2022 Share Posted April 4, 2022 Finished the trailer 1 Quote Link to comment Share on other sites More sharing options...
KC59 Posted April 4, 2022 Share Posted April 4, 2022 (edited) I recently bought a set of 1” alloy beadlock wheels and tyres for my new Eazy RC Glacier and found that the front inner tyre walls were rubbing on the front steering hubs, so I bought a set of 7mm hex drive spacers to give a little clearance but the deep reaching wheel/hub nut is a smaller thread than the original driveshaft thread 😏 Edited April 4, 2022 by KC59 1 Quote Link to comment Share on other sites More sharing options...
Popular Post martin34 Posted April 5, 2022 Popular Post Share Posted April 5, 2022 Had a bash with the dr8.Honestly for the money this thing is great. 9 Quote Link to comment Share on other sites More sharing options...
Popular Post Trunkle Posted April 5, 2022 Popular Post Share Posted April 5, 2022 Today i decided to finally approach the dreaded fiddly motor change on my scx24. It all went better than expected , might even say smoothly and the results (so far) are great! it now runs much more quietly with a ton more low speed modulation. I've yet to test it on my local beachfront concrete/sandstone course the council have unknowingly provided but so far so good! Old parts are pictured also , I've kept them in case i total something , not because the wife says i'm a squirrel 10 Quote Link to comment Share on other sites More sharing options...
Popular Post oodboo Posted April 5, 2022 Popular Post Share Posted April 5, 2022 Added lights 13 Quote Link to comment Share on other sites More sharing options...
Shergar Posted April 5, 2022 Share Posted April 5, 2022 That KG is crying out for the TT02 RSR fuch wheels 😎 1 Quote Link to comment Share on other sites More sharing options...
Stormbringer Posted April 5, 2022 Share Posted April 5, 2022 (edited) 2 hours ago, oodboo said: Added lights Wow the lights realy look good on that mate Edited April 5, 2022 by Stormbringer 2 Quote Link to comment Share on other sites More sharing options...
oodboo Posted April 6, 2022 Share Posted April 6, 2022 2 hours ago, Shergar said: That KG is crying out for the TT02 RSR fuch wheels 😎 It's m class the tt02 wheels would be too big. Might see if I can find a suitable set though. 1 Quote Link to comment Share on other sites More sharing options...
Shergar Posted April 6, 2022 Share Posted April 6, 2022 (edited) Ah, of course I forget the size difference. Would these work? https://cults3d.com/en/3d-model/various/tamiya-m-chssis-felge-im-porsche-fuchs-design Edited April 6, 2022 by Shergar 1 Quote Link to comment Share on other sites More sharing options...
Popular Post tomr Posted April 6, 2022 Popular Post Share Posted April 6, 2022 Took the dogs and the Buffalo for a walk 😁 11 Quote Link to comment Share on other sites More sharing options...
Popular Post Redback Posted April 7, 2022 Popular Post Share Posted April 7, 2022 Took 4 dead servos and got 2 living ones. Hoboa 101 servos take the 102 gears, just need to swap the pins and top cover. The mind blowing thing was the etronix 30kg servo gears went into the powerhd 18kg servo perfectly! Really chuffed about that as the power hd ones dont seem to brown out / burn out motors. 4 Quote Link to comment Share on other sites More sharing options...
Popular Post Kpowell911 Posted April 7, 2022 Popular Post Share Posted April 7, 2022 Boosted the X Maxx steering hopefully 6 Quote Link to comment Share on other sites More sharing options...
Popular Post Redback Posted April 7, 2022 Popular Post Share Posted April 7, 2022 8 minutes ago, Kpowell911 said: Boosted the X Maxx steering hopefully Have you upgraded the esc to do 8.4v or are you running a bec? Fixed the leaf springs proper on the tf2, turns out the leafs from a fasttrax trailer are a 1.1 replacement, as it lost its wheels, the trailer also makes an excellent bed, looks better than a plank of wood anyway. Also put in a spare esc / motor, repaired servo and radio, now RTR if it doesn't sell least its usable once again. My only brushed rc. 🤯 Finally fix the issues causing the diff to cut in half, the bearings have melted through the diff casing, so added more bearings 😂 Bent stub axle was replaced with one from my Hyper 10, another thing that is basically a 1.1 spare, how lucky! The front splitter was flexing and dragging, added the weight back to the front and made a little plate to better support the bumper that holds the splitter, rock solid and ready for some real testing, the new gearing is simply terrifying. on 4s....It's got a 6s esc 🚀 6 Quote Link to comment Share on other sites More sharing options...
Kpowell911 Posted April 7, 2022 Share Posted April 7, 2022 @Redback Just 7.4v BEC from the Max 6, so 55kg and 0.10 speed 1 Quote Link to comment Share on other sites More sharing options...
Shergar Posted April 7, 2022 Share Posted April 7, 2022 @Redback that trailer body works bloody well on the back there 😎 1 Quote Link to comment Share on other sites More sharing options...
Hyper7ftxoutlaw Posted April 8, 2022 Share Posted April 8, 2022 Snapped my pull starter 🙁 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.