Popular Post Yrkoon Posted April 25, 2022 Popular Post Share Posted April 25, 2022 fitted some brass wheel hexes to the trx4 and new wheels and tyres to it 🙂 11 Quote Link to comment Share on other sites More sharing options...
Shergar Posted April 25, 2022 Share Posted April 25, 2022 4 hours ago, BigGinge said: Managed to make some good progress on getting the kightrunner shell to fit onto the TRX4 over lunch. As it stands there is nowhere near enough clearance round the wheels to allow full articulation. I’m going to wait for my smaller class 1 tyres and new wheels to turn up before I start trimming anything away from them though. I really like this shell, and it was only the rear bed split that put me off, I never would clocked the arches being a pain BigGinge 🤬 1 Quote Link to comment Share on other sites More sharing options...
BigGinge Posted April 25, 2022 Share Posted April 25, 2022 (edited) 1 hour ago, Shergar said: I really like this shell, and it was only the rear bed split that put me off, I never would clocked the arches being a pain BigGinge 🤬 I have to admit I had assumed it would pretty much just drop on, didn’t suspect it would be as much of a faff as it’s turning out to be. Just have to hope that the new tyres are a decent fit when they arrive and that the colour I’ve picked works out ok. Edit: Forgot to mention but knight customs do have some models for bolt on arches that let you trim away quite a bit of the body without changing the look too much. That is my current back up plan if the class 1 wheels are still a bit tight as I’m not sure how they will size up against the 1.55 general grabbers that come stock on the RTR knightrunner. Edited April 25, 2022 by BigGinge 2 Quote Link to comment Share on other sites More sharing options...
Popular Post Tug Posted April 25, 2022 Popular Post Share Posted April 25, 2022 On 24/04/2022 at 15:33, Tug said: Getting ready for a rare bash, shoes in shot because apparently that's now a thing. The bash went well, but there were a couple of issues. The Baja kept losing signal, but that did settle after a while. Then it lost a drive pin due to the rubber O-ring perishing, so that ended play with that. The DBXL-E ran like a champ, despite throwing a dog-bone, found it and refitted it, carried on. Such a fun rig, handles well, seems tough, looks good. Actually mine doesn't look good at all, no body panels and homemade battery boxes, it's not pretty, but it works. Here's my feet, NO SHOES! The hex that lost its pin. Turns out the other hex also lost its O-ring, but that pin stayed put. Spare pins ordered, just need new O-rings. Perhaps rubber bands will do? 1 6 Quote Link to comment Share on other sites More sharing options...
Yrkoon Posted April 25, 2022 Share Posted April 25, 2022 1 hour ago, Tug said: The bash went well, but there were a couple of issues. The Baja kept losing signal, but that did settle after a while. Then it lost a drive pin due to the rubber O-ring perishing, so that ended play with that. The DBXL-E ran like a champ, despite throwing a dog-bone, found it and refitted it, carried on. Such a fun rig, handles well, seems tough, looks good. Actually mine doesn't look good at all, no body panels and homemade battery boxes, it's not pretty, but it works. Here's my feet, NO SHOES! The hex that lost its pin. Turns out the other hex also lost its O-ring, but that pin stayed put. Spare pins ordered, just need new O-rings. Perhaps rubber bands will do? sounds like you had fun lol 🙂 Quote Link to comment Share on other sites More sharing options...
Popular Post Stevelyt Posted April 26, 2022 Popular Post Share Posted April 26, 2022 This arrived today 7 Quote Link to comment Share on other sites More sharing options...
Popular Post .AJ. Posted April 26, 2022 Popular Post Share Posted April 26, 2022 Rebuilt a Summit diff, added a alloy case, Acer bearings and machined steel internals at the same time 👍 6 Quote Link to comment Share on other sites More sharing options...
Popular Post Stevelyt Posted April 26, 2022 Popular Post Share Posted April 26, 2022 Added decal . Just got to run it in 5 Quote Link to comment Share on other sites More sharing options...
Popular Post Shergar Posted April 26, 2022 Popular Post Share Posted April 26, 2022 Today I learnt that the local kids DIY woodland pumptrack must be (A) Leathal on anything with 2 wheels 🤣 and (B) when natural craters are laid with dusty nylon shagpile carpet (this is Essex!) you get the effect of almost uphill ice - I had a good 5 minutes playing with this 5 metre slope, full wheelspin scuttling sideways-forward-backward until I noticed the poor Holmes crawlmaster was leaving a ‘toasty’ aroma in the air 😆 It looked easy enough, but I only managed to clear the crest twice, the luxurious shagpile not letting you hook the tires. As ever Mr Holmes sealed can survived - what have I got to do to break one! 7 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Kpowell911 Posted April 26, 2022 Popular Post Share Posted April 26, 2022 Put some proper electrics into the E Revo 2.0 7 Quote Link to comment Share on other sites More sharing options...
Popular Post BigGinge Posted April 26, 2022 Popular Post Share Posted April 26, 2022 Got my deliveries from wheelspin and got the narrow front fenders mounted and put the new front bumper mount onto the rear. Still need to sort out lifting the rock sliders and finding a very low stack height body post option for the truck bed. 11 Quote Link to comment Share on other sites More sharing options...
Shergar Posted April 26, 2022 Share Posted April 26, 2022 They are narrow! I see the clipless mount hole, I’ve been thinking I might do that, I can live with two proud allen heads where the mount would bolt to the shell. Quote Link to comment Share on other sites More sharing options...
BigGinge Posted April 27, 2022 Share Posted April 27, 2022 (edited) 13 hours ago, Shergar said: They are narrow! I see the clipless mount hole, I’ve been thinking I might do that, I can live with two proud allen heads where the mount would bolt to the shell. Yep, the 8080X parts come with the mounting points for the new clip system used on the 2021 bronco model (as opposed to the 8080 ones which are narrow but don't have the clip points). I was thinking about trying to use the new clips to mount this shell, as Francis on RC Review has done here, but this would lift the body up more than I'd like so I've given up on using it for now. It does look promising for future use though and I might see if I can get it to fit on the prairie wolf body at some point as that is using a bit of a random mounting method at the moment. edit: I did find the body post mounts for the TRX4 sport shell which look like they have a low enough stack height for me to use on the rear of the knightrunner body, just a shame this will be my third separate parts order for this build this week as the postage costs are starting to add up. 😢 Edited April 27, 2022 by BigGinge 3 Quote Link to comment Share on other sites More sharing options...
Popular Post Spunkymunky88 Posted April 27, 2022 Popular Post Share Posted April 27, 2022 i did the upgrade to beat all upgrades i installed body clip retainers to my team associated shell I WIN! 1 4 Quote Link to comment Share on other sites More sharing options...
Popular Post .AJ. Posted April 27, 2022 Popular Post Share Posted April 27, 2022 Been testing out my new engine heater It got the engine up 65c in 10 mins 👍 10 Quote Link to comment Share on other sites More sharing options...
Popular Post Hell horn. Posted April 27, 2022 Popular Post Share Posted April 27, 2022 Smashed the br mini ESC and Rx together on the sporty. And may have poslised this bottle of amazing stuff off to tonight. Fun times. 6 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Yrkoon Posted April 27, 2022 Popular Post Share Posted April 27, 2022 fitted a alloy battery tray that sits a tad lower than the stock one on the trx4 and added some mudflaps that say landrover on em 😛 4 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Stevelyt Posted April 28, 2022 Popular Post Share Posted April 28, 2022 Fitted an electric glow plug, to my hsp nitro 1/8 scale. No more having to use the push down type, 6 Quote Link to comment Share on other sites More sharing options...
Popular Post Stevelyt Posted April 28, 2022 Popular Post Share Posted April 28, 2022 My crawler and homemade trailer 5 Quote Link to comment Share on other sites More sharing options...
Popular Post Pistols Posted April 28, 2022 Popular Post Share Posted April 28, 2022 Today, I put my new hump pack (Thanks MSUK) on to charge, the charger runs off my car battery, so I'll get about half charge before I go home, and will put it back on tomorrow mornig. I fitted new AA's to the transmitter. (Thanks MSUK) I charged my new glow start (Thanks MSUK) and tested the very old glow plug thats in the K4.6 and it worked. Got the Fuel (thanks MSUK) ready. So tomorrow, I hope to get my Savage running for the first time in, well, a long time. 🤞 6 Quote Link to comment Share on other sites More sharing options...
Pistols Posted April 29, 2022 Share Posted April 29, 2022 Update (different day so excuse the technical double post) Today, I got it running after 10 minutes of pull start madness and several loosening and tightening of the glow plug, blowing the fuel into the chamber etc. But it revved like a dragster, wouldn't idle, so I thought it was just too lean. Then I noticed the spray of fuel around the engine and it looks like the gasket in the K4.6 has died (it has been sitting for 10 or more years) On the plus side, I know it still works! YAY! 😆 2 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Stevelyt Posted April 29, 2022 Popular Post Share Posted April 29, 2022 Most of my cars . Gettng together 7 Quote Link to comment Share on other sites More sharing options...
.AJ. Posted April 29, 2022 Share Posted April 29, 2022 On 26/04/2022 at 15:20, .AJ. said: Rebuilt a Summit diff, added a alloy case, Acer bearings and machined steel internals at the same time 👍 Just finished the rear diff, I didnt bother taking any pics because it looks exactly the same as the front 😂 1 2 Quote Link to comment Share on other sites More sharing options...
Popular Post tomr Posted April 29, 2022 Popular Post Share Posted April 29, 2022 (edited) Lengthened the wheelbase and took the cantilever set off the Texan Edited April 29, 2022 by tomr 5 Quote Link to comment Share on other sites More sharing options...
Popular Post Stormbringer Posted April 29, 2022 Popular Post Share Posted April 29, 2022 The new wheels for TRX6 arrived correct size this time lol The beadlock rims were black but i sprayed them red and got them fitted today Ignore the Genius at work in background lol 8 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.