Leaderboard

Not sure if you guys will be able to see this metallic green beauty, but this is my 2wd Tamiya to join @Oh How Original in Tamiya 2wd speed record 🤩

This beauty arrived also for some bashing and speed passes.

Finished tinkering with my HB E819 race rig. Fresh oils and a couple of upgraded parts fitted and she's ready to race once all this crap's over and the tracks reopen! 🙂

Fitted the Proline Hyrax and 2.2 Beadlock wheels, there is a bit of a bind at the front when on full lock though, so have some new deeper hubs on the way for the wheels. moved the little scale MSD ignition modules and fitted some little fire extinguishers.

Pls excuse the wife's profanities, just had the Escort out for a play!! 😁 VID-20210212-WA0023.mp4

Wait for the ding... 1674336044_RivalMT10snowbashh.mp4

Fitted the wheelie bar to the 144001, it's off of another truck however with a bit of trimming it blots straight on. Once the floor arrives the two screws further back will be attached to that. Please excuse the two black strips, they are wedges so once the carbon fibre floor arrives there won't be a gap where the chassis bends. So far i'm sitting under £160 (including 1 battery) and there's not a great deal left to order, so will defently come in under £200 which I'm pretty happy about.

The hobao dc1 kit arrived today

As the batteries arrived, thought i would see if they fit as begun to think they might be to deep. 4s yet to be tested but getting decent mha 4s batteries in these little cars seems tricky, I went with 2x 100c 4s 1600mha drone / flight packs. They just fit. There is literally 2mm space before they would be hitting the top brace, got lucky. I will run them in parallel to make 3200mha should be enough for a good couple of runs and hoping having it drain from 2 battery sag will be minimal. Time will tell.

🎶 🎶 🎶 "Oh, Happy Days" 🎶🎶🎶 TGIF: All couriers joined forces to deliver all the goodies together on Friday. Ordered from MS, eBay & Amazon on different days. They all came today. After sitting 12 hours in front of the computer, a happy evening is scheduled: Make my homemade pizza Eat pizza with family movie 1 Ep. Startrek Discovery (alone with beer) 1 Ep. The Mandalorian Then turn the extra/incomplete Carnage into a mean machine (This time blasting Amon Amarth into my head) (3S)

High speed gears arrived, no other changes, hit 61mph on 3s with ease didnt even get close to maxing it at most this was 60 - 70 throttle. New personal best, 9mph off the target, easily will do 70+ without any further changes. 4s is the next step along with motor timing changes, will post updated build pics later. Edit: Some tastey data. Chuffed to bits 🙂

Gotta laugh, a Hoboa specific thread turns into an Arrma thread, no not getting one and from what i see the Mega really is built "down" to a price, cheap controller and all

Fitted a winch and some extra rear lights to the Wendigo so just awaiting arrival of roof lightbar now

Hi I ran on a nearby beach until the motor exploded. 8 cells are really scary. I was hit by the sand. It was a pleasant bash. Traxxas x-maxx 8s ESC : Hobbywing EzRun MAX6 Motor : Stock Servo : POWER HD WH 65KG Digital Servo Metal Gear Tire : Pro-Line Racing Trencher 4.3" Battery : DXF 8400mah 120c 4s X 2 Tansmitter and receiver : FlySky FS-GT5 2.4G 6CH Body : Pro-Line Racing Pre-Cut Brute Bash Armor Body (White) Gear : 20/50 Spring : Pro-Line Racing Dual Rate Spring Assortment - PART - RPM 81732 Oversized Rear Axle Carriers

But more done, tyres taped and glued, brake servo fitted esc mounting plate modified and fitted, esc setup and find out how to stop the servo moving when pressing the throttle, first time using mechanical brakes on any of my 1/5s

thats good, sounds like its just a cold issue, try next week as should warm up about 10 degree`s

drunk driving tut tut lol

Really hope hope you reach your target speed mate really fascinating thread this

they fit just dandy, you really are on course to get every little bit out of this car, well done

😂😂 Contagious laugh, looks like you are having a ball! That's what it's about! 😄

To fit in the bigger pinion need to cut the chassis a bit here. The Traxxas spur didnt hold up as good i had hoped, might have a nother couple of runs in it, its a tad deeper than a stock one so cant use slipper pads. or the shaft pins wouldnt hold the slipper plates. Might need to find a new way delivering the power to the drive cups, this driveshaft is going to be a failurepoint, not sure if it was damaged from the run, but as i held it in the air and spun the car up to see how the tires react at near max rpm, i noticed the car vibrate then it got worse and worse. No more speed runs for a little bit. Good start and impressed it handeled the power its already been fed.

well i took the wheels off to see how i wanted to mount a lipo. then this sort of happened. not even used it yet

Is that where your sleeping if you buy any more rc cars ?

Well, a slightly better painting day today, not perfect but better. I managed to get a coat of paint onto the hull, not sure the waterline is right (tried the pencil approach and failed due to having 2 left hands), but it will do for this first attempt. It needs a bit more finishing, but am happy with the colour (has a change of mind and went sky blue in the end) and it should finish up okay. The 3M vinyl masking tape was joyous to work with and gave a nice crisp line.

Managed to get some paint on the boat hull, nowhere near as good as I hoped and still needs some work but at least it is better than the last attempt. I do like decent 3M masking tape.

You know I think this is great, free entries are spot on but even paying for a “ticket” so to speak still means a great prize for little money. winner/winner only downside is Facebook, I’d rather pick my nose with a chainsaw than go on there.....

I give up, note to ones self, stop asking advice on here, if you dont ask then you dont get some what odd comments

I think best I am gonna do is just get Maverick quanum flux and order the had axle set maybe some spare arms comes to £200 with spares and see how I get on with that

Any way, I asked some questions and got good answers, the Hoboa is not happening, so we move on, I would just like to politely point out I won't be buying an Arrma

Bet your wife hates going shopping with you 😂😂

I think youre all missing the ‘SSE’ part of the post! Hobao and Hyper are usually great RCs. The SSE/SSTE range are awful and should be avoided at all costs in my opinion. Theyre so weak. The VSE is supposed to be very good however.

Ok I may have got a temp fix but also a good one to keep all the cables neat and actually faster to take the battery out than with the posts/clips and harness way. Had to turn the battery on its side though as it would not fit in otherwise so definitely not getting a battery box in there ! A narrower strap and clip may work better.

The LMT is now rocking Jconcepts JCT tyres and Tribute rims, these are 600g lighter than the stock wheel set....

I’ve got a few knocking about. Send me your address and I’ll post you one out.... Call it a late Christmas present! 🤣

GMade R1 chassis cage Bully 2 MOA Axles Axial Links Hobbywing dual ESC’s Still very much work in progress....front links are too short, the motor hits the front of the cage......which of course means the front shock will then be too short! But thats half the fun, making it all work...this is not intended as a pro crawler, just a fun project, to run trails rocks, whatever..... ESC’s will go back to back on the rear battery tray, battery will go onto the skid, rx probably under the yet to be made bonnet panel....might even get to put basic interior and driver in it!... Anyone want a Bully 2 chassis assembled but unused?!.....

Hows it going car/remote control lovers! During this mad time I am creating an old RC retro build from a late Porsche 911 I found in my attic by breaking apart another perfectly good RC car. Here is the first video. Cheers guys and enjoy!

both batteries in storage mode have all cells reading about 3.80 volts according to my charger, the batts are less than a year old.

I've sent off for a WP-1060 A ESC after a conversation with a local model shop. i feel sure they were impressed with my (received) knowledge. I'm assured it will be just the thing for me, by which I assume they mean someone who hasn't much of a clue. I feel the grandkids drifting away a bit, despite the Zooms and shouting across the drive. If he thinks of us every time he drives it, it's more than worth it. When he breaks bits, he'll know granddad'll fix it. My son-in-law can buy the transmitter batteries though. Thanks again.

Could be water in the RX, open it up disconned the leads and let it dry out, wouldnt advise hair dryer that will just evaporate the surface water not water that has ingressed in, if the motor is beeping the esc might be fine.

Ha ha, I do all the shopping, she stays home

Ignore them, just marketing pressure. you get nothing for free...https://www.moneysavingexpert.com/loans/check-free-credit-report/

I haven't run it yet, other than in the house, and I'm not in a club, so other than a quick blast on the road in front of the house it'll be a shelfer. Here's some pics without shell

Всем привет, хочу показать вам свою RC-модель. http://youtu.be/8HBDNL9K-mk

Motor, steering servo fitted to the ultimate tonight, removed the rear wing and packaged up the old Rr5 ready for its new owner

Nice, these have never really taken off which is a shame as they look so cool. Didn't I buy one from you a few years back, I think i then sold it on stright away?

Try this guy too - he's been around for years; https://www.screenprintdigitalstickers.com/customer-service

thats her job mate its in her job description

nice choice of cars, welcome 🙂

Welcome

Next time we go will let you know, looks like there might be a few of us hopefully, once lockdown is over