Derka

Looking for a cheap crawler project... Rolling chassis ideally or even a 'Slider'

Tamiya 1/12 trucks sound like what you want. The kits start around £350 to £500 and you will need basic servos for steering and 3 speed gearbox. Also a brushed ESC. They usually come with a basic brushed motor that gets you going. Then add a nimh batter and radio gear. The trailers are a tiny bit cheaper for genuine Tamiya ones.

Is that the one with FHSS 2 and the RX371W/RX37W/422DS? I'm needing FHSS4 compatible

Looking for a Sanwa radio and receiver. MT-S, M12, MT-44, MT-4S (FHSS 4/FHSS 3) May consider similar spec Futaba

Sold elsewhere

North of Scotland

Wheel and tyre bundle. The mounted tyres on Beadlocks have Proline Dual Stage Foams in them. Genuine BFG Krawler tyres mounted. Both sets of Beadlocks are from China but do the job. Adjustable hubs, similar to what Vanquish do but with no name so handy for widening track or narrowing. Hobbywing program card, not entirely sure what it's for, possibly crawler 1080 ESC but I think it might be for the EZRun series of ESC's. I'm selling up so want it all to go together. Bargain Price of £60 posted ono.

£475 posted?

Sending you a PM...

Bought this a few months back and it's just been sat on the shelf. Only been used inside in carpet for less than 10 mins. I fitted the Traxxas Pro Light kit (£100) and the BlueTooth module in the transmitter. Will come with the 3s battery also. It's in great condition and will come with box. Front bumper has been cut as I was trying to slim it down but it's fully secure just doesn't look the best. Has the Traxxas phone holder also. Looking for £450 posted for quick sale as I'm leaving the hobby.

No, sorry. Id like it all to go together

Bump... Now includes a dual battery charger. Open to sensible offers

Gentle nudge, open to reasonable offers from MSUK members. Full price + postage on eBay now.

Bought this from a guy on here a few months ago. Lots of bits replaced and upgraded. Has a new HW Max 6 Combo with a 4985 1650kv motor. Very powerful system! I've only ran 2 or 3 battery packs through the combo which was bought brand new. Brand new parts.. Wing mount Wing Dogbones rear x2 F & R bearings rubber F & R hub carriers Steering linkage Pillow balls F & R Hexes Side guards Wheels/Tyres x4 532 Wheel nuts EXB F & R Towers Rear stub axles Front axles/cvds EXB Kraton body 4x steering Ackerman bearings EXB chassis braces F & R Shock ends x4 Used original parts V4 and EXB.. EXB Chassis M2C shock standoffs Diffs x3 Diff cases x2 RPM arms x6 EXB basher number RPM rear skid plate Roll hoop Battery tray Servo mount Front dirt guards EXB tower brace Plus a few other spares inc arms etc Diffs fully rebuilt, new parts fitted where needed..!! Center - gasket, shims, d blocks, bearings, 500k Front - shims, gasket, bearings, 60k Rear - shims, gasket, 1x drivecup, bearings, diff case, 30k Shocks fully serviced/rebuilt, shock ends, 1000cst Can also include 2 pairs of 3s Lipo batts. Been out of the hobby for a while so not sure what it's actually worth. I'll start at £550 now £500 posted! posted with the batts and charger. Open to offers if you can provide info that it's over priced, happy to be corrected on pricing. Will come with the Amazon Servo but no radio gear. Any questions I'm happy to answer. £500 posted!

Sold

Call the BRCA or contact them. Their insurance definitely covers bashers. It's mandatory for club, regional and national events. On the BRCA website you can download the Members booklet that tells you all about the insurance cover they offer. https://www.brca.org/f2-stock-cars-documents/29-brca-handbooks/72-brca-handbooks-2022/1712-members-handbook-2022-web-v2 Pages 10-12.

You should be able to hold it tightly with your thumb and index finger tightly and unscrew it anti-clockwise. It's probably just a chrome plated plastic cover that has threads on the inside to screw over the threads after the wheel nut to cover it. It's purely cosmetic

BRCA covers you for bashing, it's not just racing. https://www.brca.org/join "Club and BRCA Sanctioned events with BRCA membership insurance This membership entitles you to Race or Drive RC Cars, and have a Vote on section & general rules at the BRCA AGM or section EGM This membership type is designed for Park Bashers Club Racers National Racers"

I've put the Element solid front axle on (sold the IFS so can't put it back) and high clearance links front and rear. I changed out the plastic 1.55 wheels and tyres for some beadlocks and Proline tyres. It's still running the stock RTR electrics and has seen no more than 2 hours use. It's just been something I've tinkered with but not actually ran very much. It has the Knight customs front and rear 3d printed light buckets ready for lights. Has the updated aluminium panhard mount and rear V2/GKS suspension mounts and fittings. Body has been trimmed slightly for 120mm tyres. Will come with the plastic non-beadlock wheels and un-glued tyres or I could swap out to the proline wheels and tyres I was using. Looking for £220 as is, price can be negotiated as can wheels/tyres.

Sold

For sale is my race buggy. In good condition with only minor wear as pictured on the underside of the chassis. 25T servo horn is fitted. Buggy is box stock apart from Delrin shock bushes and front 2x1.7 hole machined piston and rear 2x1.8 hole machined piston. The front pin brace is the stronger steel one and not aluminium as per the kit build. Car comes fitted with the kit front and rear anti-roll bars. Front caster inserts, rear C and D block inserts, and rear hub height inserts, Ackerman arms and the diff height adjustments parts are present and are from the new kit. Everything you will receive is pictured. If you have any questions please get in touch. Will come in the original box, partially disassembled with some spare stickers and the instruction manual on a credit card size thumb drive. Looking for £220 Posted.

Just incase anyone here might be interested in a top quality servo. Only used for a few months in a 2wd buggy with a servo saver fitted so has seen no real stress. £150 new from Modelsport. £70 posted for members here. Torque (4.8V): 9 kg-cm / 124.9 oz-in Torque (6.0V): 12 kg-cm / 166.6 oz-in Torque (7.4V): 15 kg-cm / 208.3 oz-in Speed: 0.09 s (4.8V) / 0.073 s (6.0V) / 0.059 s (7.4V) Weight: 58.5 g (2.06 oz) Dimension：40.5 x 20.5 x 25.4 mm

Just looking for a cheap set of tyres to mount on some 1.9 beadlocks to put on my Knightrunner before I sell it.

I think his concerns over software was because the DJI Fly app from the Google play store is not there, you have to download it direct from DJI and then allow for unknown apps to run. He won't be near any airports as he is into hill walking and usually nothing built up within sight. I was just unsure as it's only something I've briefly dabbled in. I think he just needs a flyer ID and put the number on the drone and he is golden? Thanks guys 👍

Want to get a drone for some footage for a mate who is out hill walking. DJI Mini 2 are going for £300-400 used and seems to be fairly good in light winds and does 4k and under the 250g limit and is small. Keep reading about how DJI restrict you and have questionable privacy policies and are black listed in the US. Is there anything similar in that price range that offers similar quality footage?