Stormbringer Posted March 14, 2023 Share Posted March 14, 2023 always the case lol 1 Quote Link to comment Share on other sites More sharing options...
Rustic Ade Posted March 14, 2023 Share Posted March 14, 2023 39 minutes ago, Kpowell911 said: I had far less work to do to be fair Ironically I found the old radio gear in a pile of stuff my ex wife dropped of which had been hidden in the cellar. No matter, the cobra now has common radio gear with my big rock and the other changes have been inexpensive and fun. It's all a learning curve, and it's a good community to learn in. 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Kpowell911 Posted March 14, 2023 Popular Post Share Posted March 14, 2023 So, continuing the nostalgia. I finished work early, sun was out so the Mrs and I took a walk to the local park. So I took the Merc TL-01…. With a twist. This is a bone stock TL-01 with MSC. Aged 12 when the TL-01 came out, this pretty much what we had if we were lucky enough to have parents who could afford an RC car for their child. If you told 12 year old me that Id be able to put a GPS on my toy car and find out how fast it went my mind would have blown. Thankfully 23 years later…… We can! I love the blend of old school electronics with a GPS Speed Analyzer.,,, Car is bone stock, stock gearing, silver can. Radio is Acoms 27mhz. The NIMH is an 1800mah Traxxas, borrowed from my EZ Start wand for my 2004 Revo 2.5R, so no idea on condition etc, but it peak charged in around and hour and showed decent voltage….. PLACE YOUR BETS…….. I had a good smile running it mind, the handling is shocking. Ive no idea if 13mph is “normal” Im guessing other people have done the same so may find some speeds. However, I have a benchmark, Ill do the same with my Subaru TL-01. This will have 2.4ghz radio, a Tamiya BZ Motor, 1060 ESC and a 2S Lipo. Combined with speed tuned gearing and bearings. 8 Quote Link to comment Share on other sites More sharing options...
Stormbringer Posted March 14, 2023 Share Posted March 14, 2023 Took you back a good few years then Quote Link to comment Share on other sites More sharing options...
Rustic Ade Posted March 14, 2023 Share Posted March 14, 2023 1 hour ago, Kpowell911 said: So, continuing the nostalgia. I finished work early, sun was out so the Mrs and I took a walk to the local park. So I took the Merc TL-01…. With a twist. This is a bone stock TL-01 with MSC. Aged 12 when the TL-01 came out, this pretty much what we had if we were lucky enough to have parents who could afford an RC car for their child. If you told 12 year old me that Id be able to put a GPS on my toy car and find out how fast it went my mind would have blown. Thankfully 23 years later…… We can! I love the blend of old school electronics with a GPS Speed Analyzer.,,, Car is bone stock, stock gearing, silver can. Radio is Acoms 27mhz. The NIMH is an 1800mah Traxxas, borrowed from my EZ Start wand for my 2004 Revo 2.5R, so no idea on condition etc, but it peak charged in around and hour and showed decent voltage….. PLACE YOUR BETS…….. I had a good smile running it mind, the handling is shocking. Ive no idea if 13mph is “normal” Im guessing other people have done the same so may find some speeds. However, I have a benchmark, Ill do the same with my Subaru TL-01. This will have 2.4ghz radio, a Tamiya BZ Motor, 1060 ESC and a 2S Lipo. Combined with speed tuned gearing and bearings. I guess we forget things have changed a lot. Maybe the near 30 year old Cobra isn't slow, maybe today's youth is just faster. 🤔 1 1 Quote Link to comment Share on other sites More sharing options...
Popular Post ReggieC Posted March 15, 2023 Popular Post Share Posted March 15, 2023 Ate a kebab next to it! 2 1 7 Quote Link to comment Share on other sites More sharing options...
BigGinge Posted March 15, 2023 Share Posted March 15, 2023 Not this again. Must resist. 3 Quote Link to comment Share on other sites More sharing options...
Popular Post Alex97 Posted March 15, 2023 Popular Post Share Posted March 15, 2023 Assembled the tracks for the TRX4M, the body part printed with zero issues however the tracks aren't great. No matter what I did I couldn't get them to print nicely so I've only been able to make 2! I've ordered a different TPU however if anyone has had any success printing with TPU please help. I also fitted new lights to the body as well as a metal servo mount. 8 Quote Link to comment Share on other sites More sharing options...
froggy8 Posted March 15, 2023 Share Posted March 15, 2023 23 minutes ago, Alex97 said: Assembled the tracks for the TRX4M, the body part printed with zero issues however the tracks aren't great. No matter what I did I couldn't get them to print nicely so I've only been able to make 2! I've ordered a different TPU however if anyone has had any success printing with TPU please help. I also fitted new lights to the body as well as a metal servo mount. looking good alex, you getting it ready for abit of snow or gravel? Quote Link to comment Share on other sites More sharing options...
BigGinge Posted March 15, 2023 Share Posted March 15, 2023 37 minutes ago, Alex97 said: if anyone has had any success printing with TPU please help I've done a bit of TPU printing before and apart from it being really really stringy it all went surprisingly well. What sort of set up are you using for the prints, is it a bowden or direct drive extruder? Quote Link to comment Share on other sites More sharing options...
Alex97 Posted March 15, 2023 Share Posted March 15, 2023 34 minutes ago, froggy8 said: looking good alex, you getting it ready for abit of snow or gravel? Sand, plus they look pretty cool. 20 minutes ago, BigGinge said: I've done a bit of TPU printing before and apart from it being really really stringy it all went surprisingly well. What sort of set up are you using for the prints, is it a bowden or direct drive extruder? Bowden however I've got Capricorn PTFE tube, printing a small block with a gap I got rid of all stringing and the part looked good. When I went to print the tracks it looked rubbish and left a lot of gaps. The main issue is that the section between the teeth is only one wall thick, this also lead to a few issues. 1 Quote Link to comment Share on other sites More sharing options...
froggy8 Posted March 15, 2023 Share Posted March 15, 2023 1 minute ago, Alex97 said: Sand, plus they look pretty cool. Bowden however I've got Capricorn PTFE tube, printing a small block with a gap I got rid of all stringing and the part looked good. When I went to print the tracks it looked rubbish and left a lot of gaps. The main issue is that the section between the teeth is only one wall thick, this also lead to a few issues. i agree, they do look good. but taking it on sand, hhmmm....... will need a full strip down afterwards though. Quote Link to comment Share on other sites More sharing options...
BigGinge Posted March 15, 2023 Share Posted March 15, 2023 I'd put a direct drive extruder on my ender 3 before trying to print TPE so wonder if that might be the thing that made the difference for me. I think the models I was working with had a fair bit of them with single thickness walls (the outer layer on the no-foam foams below) and these were mostly ok. Unfortunately the inserts didn't end up giving me the results I wanted as the material I had was still a bit too firm for this application so I gave up after trying a few different designs. 3 Quote Link to comment Share on other sites More sharing options...
Alex97 Posted March 15, 2023 Share Posted March 15, 2023 32 minutes ago, froggy8 said: i agree, they do look good. but taking it on sand, hhmmm....... will need a full strip down afterwards though. That's what the airline is for. I live nowhere near the coast so it will only see sand on the odd UK holiday. The model was a free download so I've only had to pay for the bearings which were was £17 from China. 7 minutes ago, BigGinge said: I'd put a direct drive extruder on my ender 3 before trying to print TPE so wonder if that might be the thing that made the difference for me. I think the models I was working with had a fair bit of them with single thickness walls (the outer layer on the no-foam foams below) and these were mostly ok. Unfortunately the inserts didn't end up giving me the results I wanted as the material I had was still a bit too firm for this application so I gave up after trying a few different designs. Direct drive is 100% the way forward however I've only got a single gentry so unless I get a pancake stepper motor. I've ordered another TPU so hopefully that will help. 2 Quote Link to comment Share on other sites More sharing options...
froggy8 Posted March 15, 2023 Share Posted March 15, 2023 6 minutes ago, Alex97 said: That's what the airline is for. I live nowhere near the coast so it will only see sand on the odd UK holiday. The model was a free download so I've only had to pay for the bearings which were was £17 from China. Direct drive is 100% the way forward however I've only got a single gentry so unless I get a pancake stepper motor. I've ordered another TPU so hopefully that will help. Ah yes, the hose line, that will make cleaning up alot easier. But from what I have read, it gets inside the diffs too. Quote Link to comment Share on other sites More sharing options...
Alex97 Posted March 15, 2023 Share Posted March 15, 2023 11 minutes ago, froggy8 said: Ah yes, the hose line, that will make cleaning up alot easier. But from what I have read, it gets inside the diffs too. Good thing the TRX4M has a solid axle 😃 1 Quote Link to comment Share on other sites More sharing options...
froggy8 Posted March 15, 2023 Share Posted March 15, 2023 11 minutes ago, Alex97 said: Good thing the TRX4M has a solid axle 😃 did not know that 😄 that saves you from taking it apart 🙂 Quote Link to comment Share on other sites More sharing options...
Popular Post Stormbringer Posted March 15, 2023 Popular Post Share Posted March 15, 2023 4 hours ago, BigGinge said: Not this again. Must resist. The kebab or the car ? 1 3 Quote Link to comment Share on other sites More sharing options...
froggy8 Posted March 15, 2023 Share Posted March 15, 2023 3 minutes ago, Stormbringer said: The kebab or the car ? i am guessing the kebab as when i saw it i want it 😄 1 2 Quote Link to comment Share on other sites More sharing options...
totlxtc Posted March 15, 2023 Share Posted March 15, 2023 (edited) @Kpowell911 - Saw this and thought of youhttps://rlaarlo.com/collections/1-10th-scale?ref=TRC Edited March 15, 2023 by totlxtc Quote Link to comment Share on other sites More sharing options...
Kpowell911 Posted March 15, 2023 Share Posted March 15, 2023 19 minutes ago, totlxtc said: @Kpowell911 - Saw this and thought of youhttps://rlaarlo.com/collections/1-10th-scale?ref=TRC I saw Tomleys video on these earlier. I appreciate it looks like a Porsche, especially in that Gulf colourway, but its not something Im interested in. Looks very good value however on the pre sale price. 1 Quote Link to comment Share on other sites More sharing options...
Popular Post BigGinge Posted March 16, 2023 Popular Post Share Posted March 16, 2023 (edited) 16 hours ago, Stormbringer said: The kebab or the car ? the kebab of course. edit: This is where it all started, it was definitely @Bert_w164's fault. Edited March 16, 2023 by BigGinge 1 3 Quote Link to comment Share on other sites More sharing options...
Popular Post Bert_w164 Posted March 16, 2023 Popular Post Share Posted March 16, 2023 Cheers @BigGingeyou just reminded me I need to clean up the EB48 2.0 and get it up for sale...and I need to eat another kebab. 1 3 Quote Link to comment Share on other sites More sharing options...
Popular Post ReggieC Posted March 16, 2023 Popular Post Share Posted March 16, 2023 7 hours ago, Bert_w164 said: Cheers @BigGingeyou just reminded me I need to clean up the EB48 2.0 and get it up for sale...and I need to eat another kebab. On 15/03/2023 at 18:03, froggy8 said: i am guessing the kebab as when i saw it i want it 😄 10 hours ago, BigGinge said: the kebab of course. Can never have enough kebabs, guys! 1 3 Quote Link to comment Share on other sites More sharing options...
totlxtc Posted March 16, 2023 Share Posted March 16, 2023 Fun fact: I have never had a kebab - ever. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.