Acidsnow Posted January 31, 2021 Share Posted January 31, 2021 Cheers Ag100, when ye fitting the shift light to yer monster tach? Quote Link to comment Share on other sites More sharing options...
Ag100 Posted January 31, 2021 Share Posted January 31, 2021 43 minutes ago, Acidsnow said: Cheers Ag100, when ye fitting the shift light to yer monster tach? Ha, that’s a little above my skill set😀 Quote Link to comment Share on other sites More sharing options...
Popular Post Mack1 Posted February 1, 2021 Popular Post Share Posted February 1, 2021 Made myself a rear window screen for the 5ive T. Got some sizes and programmed a louvered plate and then painted it. Held in place by clips at the bottom and magnets at the top for now.Undecided which colour to go for at the moment 😀. Also made a front window from perspex. Even managed to curve it slightly to match the bodywork. 9 Quote Link to comment Share on other sites More sharing options...
Lone-wolf Posted February 1, 2021 Share Posted February 1, 2021 No biggie, dug out a cooling fan and fitted a servo futaba plug, while i had the soldering gear out i made a series XT60 setup, this is all for the new project fast Strada 1 Quote Link to comment Share on other sites More sharing options...
Alex97 Posted February 1, 2021 Share Posted February 1, 2021 13 hours ago, Ag100 said: Made up some more lights using some 3mm LEDs, I then installed them in the dash gauges, I used the holes that were for draining the excess resin from when they were printed, the Monster Rev counter lights up nicely, the gauge pod not so much, I may have to drill some tiny holes behind the stickers. the sides are off for another job that is ongoing. Looks great, have you seen these RX swicthes? https://uk.banggood.com/LED-Lights-Controller-Electronic-Switch-2A-For-Multi-Rotor-RC-Drone-FPV-Racing-p-976106.html?utm_source=googleshopping&utm_medium=cpc_organic&gmcCountry=GB&utm_content=minha&utm_campaign=minha-gbg-en-pc¤cy=GBP&cur_warehouse=CN&createTmp=1&ID=516617&utm_source=googleshopping&utm_medium=cpc_bgcs&utm_content=sxxx&utm_campaign=ssc-gbg-toys-rcdro-ve-newcustom-80-1118&gclid=Cj0KCQiA6t6ABhDMARIsAONIYyxUCnv_qzU_AETRrCh56k3i08jRGyq5dSh7qcFUlH32Ym_Aau9coeQaAtP-EALw_wcB Would allow you to controll them using your 3rd channel 2 Quote Link to comment Share on other sites More sharing options...
Ag100 Posted February 1, 2021 Share Posted February 1, 2021 36 minutes ago, Alex97 said: Looks great, have you seen these RX swicthes? https://uk.banggood.com/LED-Lights-Controller-Electronic-Switch-2A-For-Multi-Rotor-RC-Drone-FPV-Racing-p-976106.html?utm_source=googleshopping&utm_medium=cpc_organic&gmcCountry=GB&utm_content=minha&utm_campaign=minha-gbg-en-pc¤cy=GBP&cur_warehouse=CN&createTmp=1&ID=516617&utm_source=googleshopping&utm_medium=cpc_bgcs&utm_content=sxxx&utm_campaign=ssc-gbg-toys-rcdro-ve-newcustom-80-1118&gclid=Cj0KCQiA6t6ABhDMARIsAONIYyxUCnv_qzU_AETRrCh56k3i08jRGyq5dSh7qcFUlH32Ym_Aau9coeQaAtP-EALw_wcB Would allow you to controll them using your 3rd channel Thanks, I will have a look at those Quote Link to comment Share on other sites More sharing options...
Popular Post Mack1 Posted February 1, 2021 Popular Post Share Posted February 1, 2021 Got my day planned today. Had some upgrade M1 gears come this morning ready to upgrade from the standard 0.6M already fitted to my Trex 700. 5 Quote Link to comment Share on other sites More sharing options...
Acidsnow Posted February 1, 2021 Share Posted February 1, 2021 3 hours ago, Ag100 said: Thanks, I will have a look at those Ah picked one of these up from ebay for my dr8 thing, works a treat! Was aboot half that price tho. Quote Link to comment Share on other sites More sharing options...
Oh How Original Posted February 1, 2021 Share Posted February 1, 2021 Broke the Senton, snapped shock tower, that's the first time it's broken a non wear item. 1 3 Quote Link to comment Share on other sites More sharing options...
Redback Posted February 1, 2021 Share Posted February 1, 2021 was it the cold or a bad landing? Quote Link to comment Share on other sites More sharing options...
Popular Post Ag100 Posted February 1, 2021 Popular Post Share Posted February 1, 2021 28 minutes ago, Oh How Original said: Broke the Senton, snapped shock tower, that's the first time it's broken a non wear item. Looks good now you’ve lowered it though😀 1 3 Quote Link to comment Share on other sites More sharing options...
Popular Post Oh How Original Posted February 1, 2021 Popular Post Share Posted February 1, 2021 36 minutes ago, Redback said: was it the cold or a bad landing? -0.5c, I was on my bike as well lol. Straight into a wall wheel first Here's about 1% of what it did 😄 full video to follow... 659201174_SentonHighlights.mp4 5 1 3 Quote Link to comment Share on other sites More sharing options...
DAL3D Posted February 1, 2021 Share Posted February 1, 2021 The bodies do take a beating on a Senton but it does protect the mechanics.. up to a point 😭 Quote Link to comment Share on other sites More sharing options...
Jumper Posted February 1, 2021 Share Posted February 1, 2021 i consider everything on an off road rc is a wear item, especially with this kind of driving Quote Link to comment Share on other sites More sharing options...
Stormbringer Posted February 1, 2021 Share Posted February 1, 2021 you do bash it tho mate Quote Link to comment Share on other sites More sharing options...
Oh How Original Posted February 1, 2021 Share Posted February 1, 2021 I don't know what you mean, I am not a hard basher made of glass I think that's all 😛 3 Quote Link to comment Share on other sites More sharing options...
Popular Post everclear1984 Posted February 1, 2021 Popular Post Share Posted February 1, 2021 Found the perfect place to add some weight to the front of the Stampede. Wheelies are fun but not being able to steer with ANY throttle gets old pretty quickly! The RPM bulkhead has a hollow underneath made to add modelling clay for extra weight too. Nice little touch. 5 Quote Link to comment Share on other sites More sharing options...
Yrkoon Posted February 1, 2021 Share Posted February 1, 2021 had my kronos out the front of the garden yesterday and made it do a nice roll which knackered it's steering servo a bit, i was lucky and had a spare etronix one 21.8 kg which is a slight upgrade from the 20kg one it came with. dug out my blade nano and 130x helis earlier and had a few batts through each one in the house and never crashed which is a bonus as i have not flown for years i think 🙂 2 Quote Link to comment Share on other sites More sharing options...
Oh How Original Posted February 2, 2021 Share Posted February 2, 2021 14 hours ago, Yrkoon said: had my kronos out the front of the garden yesterday and made it do a nice roll which knackered it's steering servo a bit, i was lucky and had a spare etronix one 21.8 kg which is a slight upgrade from the 20kg one it came with. dug out my blade nano and 130x helis earlier and had a few batts through each one in the house and never crashed which is a bonus as i have not flown for years i think 🙂 Kinda miss my old micro helis I've gotta be honest. 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Ag100 Posted February 2, 2021 Popular Post Share Posted February 2, 2021 Decided to make the side grills/vents a bit more realistic. Cut away the plastic and fitted some stainless steel mesh behind. quite please with how it looks. 11 Quote Link to comment Share on other sites More sharing options...
Stormbringer Posted February 2, 2021 Share Posted February 2, 2021 Very nice mate 1 Quote Link to comment Share on other sites More sharing options...
Popular Post CarlC Posted February 2, 2021 Popular Post Share Posted February 2, 2021 Fabricated a bash bar for my Dementor, then realised I didn't have the right length bolts to fit it but they are now ordered. 6 Quote Link to comment Share on other sites More sharing options...
NOFX Posted February 2, 2021 Share Posted February 2, 2021 Broke the drive shaft on the Orlandoo shogun. They're such an arse to reassemble 🙄 Quote Link to comment Share on other sites More sharing options...
Popular Post Twotone Posted February 2, 2021 Popular Post Share Posted February 2, 2021 Fitted a couple bits to my mini t 2.0 and cut out the baja shell 4 Quote Link to comment Share on other sites More sharing options...
oodboo Posted February 2, 2021 Share Posted February 2, 2021 Decals and beer 1 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.