Alex97 Posted June 21, 2020 Share Posted June 21, 2020 (edited) Like said above, post your favourite RC shell... I had this painted for my B44.2, it was black white and teal which looked great. Sadly this is the only picture I can find. It was taken at the 2014 oople stotfold race, was a great day and the last time I used this car before going 2wd. Edited June 23, 2020 by Alex97 3 Quote Link to comment Share on other sites More sharing options...
Popular Post .AJ. Posted June 21, 2020 Popular Post Share Posted June 21, 2020 One of my better paint jobs 9 Quote Link to comment Share on other sites More sharing options...
Popular Post GMballistic Posted June 21, 2020 Popular Post Share Posted June 21, 2020 I've got a few big paint jobs planned for later this year with a lot of paints ready to go but currently my favourite paint job is my Arrma Typhon 6S speed runner body shell. The finish was done using Tamiya Iridescent Purple/Green (PS-46), Tamiya Black (PS-5), Tamiya Fluorescent Yellow (PS-27) and Tamiya White (PS-1) for the final backing.The window duct a NACA style inlet was purchased from Hobbyking available here: https://hobbyking.com/en_us/naca-st...ffiliate_code=ZDVJBUCXUIIIETS&_asc=9642645716 Process was; Mark out and cut out air duct on side window (also clean up some of the factory trimming/holes). Wash the body with luke warm soapy water and dry. Mask off windows and areas I wanted to be fluorescent yellow. Spray painted 6 light coats of Tamiya PS-46 ensuring a nice even coverage (do not go on too heavy). Allow to dry between coats. Spray painted 6+ light coats of Tamiya PS-5 ensuring full coverage with no see through areas ~ hold up to a light to see. Add more coats of black if needed. Allow to dry. Remove fluorescent yellow masking carefully (leave window masking in place!). Spray painted 6+ light coats of Tamiya PS-27 concentrating on clear areas of the body shell. Allow to dry. Spray painted 6+ light coats of Tamiya PS-1 (white makes the fluorescent really pop) over the entire shell. Allow to dry. Once paint is dry remove window masking and outer shell over spray protector. Glued in place my air duct on the side window using a thick super glue (Adseal 516). Fitted the rubber body clip retainers and R-clips (tip: use a hair dryer to warm up the rubber before trying to pull through body then pull through using pliers whilst pressing down on top). 10 Quote Link to comment Share on other sites More sharing options...
fnknan Posted June 21, 2020 Share Posted June 21, 2020 (edited) It's seen better days Painted it up for my slash truggy Edited June 21, 2020 by fnknan 2 Quote Link to comment Share on other sites More sharing options...
Popular Post pieman5 Posted June 21, 2020 Popular Post Share Posted June 21, 2020 (edited) Didn't paint it myself but this is one of my fav's from a while back on a rustler And this RJ speed funny car i owned a while back, again not painted by me lol Edited June 21, 2020 by pieman5 5 Quote Link to comment Share on other sites More sharing options...
Yorkshireman Posted June 21, 2020 Share Posted June 21, 2020 A few of my better ones ! Quote Link to comment Share on other sites More sharing options...
Popular Post CarlC Posted June 21, 2020 Popular Post Share Posted June 21, 2020 My favourite crawler shell.... 6 Quote Link to comment Share on other sites More sharing options...
Popular Post RCbutcher Posted June 21, 2020 Popular Post Share Posted June 21, 2020 I'm a basic painter I wish I could visualise and create airbrush quality I've recently started to cheat using vynal cut decals as paint masks my fav so far is this one for my daughters basher in a predominantly boy hobby what girl wouldnt love an rc like this. It's still kinda rough but defo my most ambitious yet. Whilst still be pretty simple. 5 Quote Link to comment Share on other sites More sharing options...
Popular Post oodboo Posted June 22, 2020 Popular Post Share Posted June 22, 2020 I know it’s only 2 colours but I was really happy with the way this shell turned out. It’s given me a bit confidence to tackle more paint jobs. 9 Quote Link to comment Share on other sites More sharing options...
Popular Post ChrisT Posted June 22, 2020 Popular Post Share Posted June 22, 2020 I'm not very imaginative either, mostly boxart. But out of what I have I'd say the Merc Promarkt is one of my faves, I just think it looks so mean and aggressive. The most involved shell painting I've done is the Kamei Golf. 4 colours. 9 Quote Link to comment Share on other sites More sharing options...
GMballistic Posted June 22, 2020 Share Posted June 22, 2020 1 hour ago, ChrisT said: I'm not very imaginative either, mostly boxart. But out of what I have I'd say the Merc Promarkt is one of my faves, I just think it looks so mean and aggressive. I love that Merc too @ChrisT . I've seen a fair few of your builds in threads and I think it's your attention to detail as shown in the two above that makes your body shells look so great. 😎 That Golf of yours looks great too. Multiple colours are always problematic in my experience especially when trying to keep clean lines, ...paint has a nasty habit of trying to creep under masking sometimes no matter how thorough you are with your prep. This was one of my first multi colour painted shells a HPI Subaru Impreza body on a Thunder Tiger TS4N and it was a great learning experience. 1 Quote Link to comment Share on other sites More sharing options...
ChrisT Posted June 22, 2020 Share Posted June 22, 2020 48 minutes ago, GMballistic said: I love that Merc too @ChrisT . I've seen a fair few of your builds in threads and I think it's your attention to detail as shown in the two above that makes your body shells look so great. 😎 That Golf of yours looks great too. Multiple colours are always problematic in my experience especially when trying to keep clean lines, ...paint has a nasty habit of trying to creep under masking sometimes no matter how thorough you are with your prep. This was one of my first multi colour painted shells a HPI Subaru Impreza body on a Thunder Tiger TS4N and it was a great learning experience. Thanks for the kind words 👍 Yes, no matter how hard I try or how many times I go over it, there's always bleeds. Never done a shell without one. Quote Link to comment Share on other sites More sharing options...
GMballistic Posted June 22, 2020 Share Posted June 22, 2020 3 minutes ago, ChrisT said: Thanks for the kind words 👍 Yes, no matter how hard I try or how many times I go over it, there's always bleeds. Never done a shell without one. You're welcome and same here regarding the bleeds. 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Ag100 Posted June 22, 2020 Popular Post Share Posted June 22, 2020 Love the Golf @ChrisT. im not particularly imaginative either, the current shell I have was done with Core RC Clear sparkle fist, then Core Neon Pink, the Core Rc White Knight. I did the window surrounds with some Kyosho Micron tape. the only real issue I had was the the clear sparkle is in a very runny carrier which seeped under the window mask on one side. overal quite please with it, but nothing compared to some of the above. 4 Quote Link to comment Share on other sites More sharing options...
Popular Post Nickarla Posted June 22, 2020 Popular Post Share Posted June 22, 2020 (edited) Hyper ST Pro after I took the rear wing off. Edited June 22, 2020 by Nickarla 5 Quote Link to comment Share on other sites More sharing options...
Popular Post Sharkfat78 Posted June 23, 2020 Popular Post Share Posted June 23, 2020 I'd say my favourite has to be this one. Fiesta type body for the Losi 5 12 Quote Link to comment Share on other sites More sharing options...
Yrkoon Posted June 25, 2020 Share Posted June 25, 2020 (edited) On 21/06/2020 at 21:18, pieman5 said: Didn't paint it myself but this is one of my fav's from a while back on a rustler And this RJ speed funny car i owned a while back, again not painted by me lol dont worry pie man the blue shell is still immaculate, stormbringer bought it from u and i went havers on it, we sorted out the wonkey front wobbly wheel and the suspension is a lot more stable now, got hyper 7 shocks on the back and thunder tiger xxt shocks on the front, handles like a dream now with the same esc and motor when we first got it it was stupid mental, kept popping off steering links etc and insanely fast in a straight line, we soon realised it was set up for a straight line speed run lol don't worry im making it into basher, but that shell is awesome, so i bash the other one all good we have been looking after it pie man can also get some better pics if ya want at the moment it is going about same speed as dads hyper vs 4s, dads hyper beats it on grass a tad but think the rustler has it on tarmac slightly Edited June 25, 2020 by Yrkoon 3 Quote Link to comment Share on other sites More sharing options...
pieman5 Posted June 25, 2020 Share Posted June 25, 2020 9 hours ago, Yrkoon said: dont worry pie man the blue shell is still immaculate, stormbringer bought it from u and i went havers on it, we sorted out the wonkey front wobbly wheel and the suspension is a lot more stable now, got hyper 7 shocks on the back and thunder tiger xxt shocks on the front, handles like a dream now with the same esc and motor when we first got it it was stupid mental, kept popping off steering links etc and insanely fast in a straight line, we soon realised it was set up for a straight line speed run lol don't worry im making it into basher, but that shell is awesome, so i bash the other one all good we have been looking after it pie man can also get some better pics if ya want at the moment it is going about same speed as dads hyper vs 4s, dads hyper beats it on grass a tad but think the rustler has it on tarmac slightly Damn!! Good to see that again, and not ruined yet lol. Must be at least 6 years old now that shell, great to see its still with a fellow enthusiast 👍 2 Quote Link to comment Share on other sites More sharing options...
Yrkoon Posted June 27, 2020 Share Posted June 27, 2020 (edited) hehe yeh it is a good truck and it is has been getting a lot more use now with the lock down stuff, the other shell is still in good shape apart from where the back body pin goes, a hole developed there after many flips, ill sort that easy can get some proper pics of it on blue shell if ya want? and under the shell, really turning into a good basher and well used to the speed, have to unscrew the front 2 screws on that clear platform on the back which has the esc just to fit a 5000 hardcase battery in im still loving it and it is in awesome hands, i did think about toniing the motor down a tad but nah it is the go to speed demon and turns now with they shocks plus shares parts with my bandit which i also love Edited June 27, 2020 by Yrkoon Quote Link to comment Share on other sites More sharing options...
Popular Post Garry Posted June 27, 2020 Popular Post Share Posted June 27, 2020 One from many years ago but one i'm quite proud of. Kamtec Morris Minor Traveller, Opel green, Rover Brown, Plastikote chrome on a Tamiya M05. 9 Quote Link to comment Share on other sites More sharing options...
D4v3 Posted July 4, 2020 Share Posted July 4, 2020 A couple of my favourite shells, firstly my Hpi WR8 RX43 shell as I love the colour changing paint and the amount of detail. Then there's this Lambo with a simple white paint job, don't think you can go wrong with white always looks good imo, it doesn't have a home at the moment. Not sure what to do with it, been tucked away at the back of a cupboard for years after painting it. 2 Quote Link to comment Share on other sites More sharing options...
Yrkoon Posted July 15, 2020 Share Posted July 15, 2020 (edited) dang they look good d4 Edited July 15, 2020 by Yrkoon Quote Link to comment Share on other sites More sharing options...
Popular Post Yorkshireman Posted July 16, 2020 Popular Post Share Posted July 16, 2020 Lancia Beta...the glory days. 7 Quote Link to comment Share on other sites More sharing options...
Yorkshireman Posted July 17, 2020 Share Posted July 17, 2020 3 Quote Link to comment Share on other sites More sharing options...
.AJ. Posted July 23, 2020 Share Posted July 23, 2020 Found this pic of a body I had painted for my SCTE 1.0, many years ago 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.