53HRA Posted February 13, 2010 Share Posted February 13, 2010 RC4WD Subzero scaler/crawler Quote Link to comment Share on other sites More sharing options...
ckemp21 Posted February 13, 2010 Share Posted February 13, 2010 loving the matt black finish there...gonna do the same to my Summit. top stuff fella Quote Link to comment Share on other sites More sharing options...
willashcroft Posted February 13, 2010 Share Posted February 13, 2010 Okay manny, extremely jealous! 1 Quote Link to comment Share on other sites More sharing options...
biggusditchus Posted February 25, 2010 Share Posted February 25, 2010 (edited) Not been on here in a while, good to see a rock crawler section. So here are a few pics of mine, will start with the current ones. Losi Mini Rock Crawler much modified This is my 2.2 crawler, it has axial axles, rc4wd transmission and a carbon fibre chassis (silver weave) This is Erica's crawler (yes the missus is into rc too ) - basically an Axial Scorpion with a chassis designed for her. also have a few scalers including a Tamiya Hilux, a scaler with an extended clod body and a project truck "willy rash: the return" will post some of older ones another time. Edited February 25, 2010 by biggusditchus Quote Link to comment Share on other sites More sharing options...
willashcroft Posted February 25, 2010 Share Posted February 25, 2010 (edited) Some nice crawlers there rich! Loving the wheely from your comp truck And That gate at the Nats, Was the worst gate ever! Edited February 25, 2010 by willashcroft Quote Link to comment Share on other sites More sharing options...
biggusditchus Posted February 25, 2010 Share Posted February 25, 2010 (edited) Loving the wheely from your comp truck Not as good as the one of Drzjohn's comp truck I took.. Edited February 25, 2010 by biggusditchus Quote Link to comment Share on other sites More sharing options...
willashcroft Posted February 25, 2010 Share Posted February 25, 2010 That's Class Where are those rocks? Up in derbyshire somewhere? Quote Link to comment Share on other sites More sharing options...
biggusditchus Posted March 1, 2010 Share Posted March 1, 2010 (edited) Thought I would share these pics of my other half's old stick clod. She loved that shell and insisted I paint it that colour, photos taken in the highlands. There was also the older version, a Twinset designed chassis... Big Lil she named it. Yes Will, its on top of Black Rocks near Matlock, Derbyshire. Edited March 1, 2010 by biggusditchus Quote Link to comment Share on other sites More sharing options...
Empyfree Posted March 16, 2010 Share Posted March 16, 2010 (edited) Playing on my bonfire pile! Edited March 16, 2010 by Empyfree Quote Link to comment Share on other sites More sharing options...
Kpowell911 Posted March 16, 2010 Share Posted March 16, 2010 Thats already more use that I had with it Quote Link to comment Share on other sites More sharing options...
ckemp21 Posted March 20, 2010 Share Posted March 20, 2010 1 Quote Link to comment Share on other sites More sharing options...
seanmcgrath48 Posted March 22, 2010 Share Posted March 22, 2010 Heres my Losi Mini Rock Crawler... Quote Link to comment Share on other sites More sharing options...
TiM! Posted June 5, 2010 Author Share Posted June 5, 2010 Few teaser pic's of my new landy shell... Very pleased with the fit, wheelbase is spot on letting me lower the arches right over the wheels without any rubbing. Might be a little while before its painted. It's very hard to mask up, and the colours I want don't help. Lets just say that I won't be painting it. Quote Link to comment Share on other sites More sharing options...
STdemoniac Posted June 30, 2010 Share Posted June 30, 2010 27/06 friendly comp. at Doclands winner Quote Link to comment Share on other sites More sharing options...
XV Pilot Posted July 10, 2010 Share Posted July 10, 2010 (edited) One of these days when funds permit, I'll be getting myself a CC01, but until then I'm using my TL01 and doing what I can to turn it into a semi-passable scaler. So far I have fitted a 55-turn motor and servo winch, locked the diffs, raised the suspension as far as it'll go, fitted a pair of TL01B front bumpers to the front and rear of the chassis and added a home-made tow hitch to the back and nudge bar to the front. The Stadium Raider/Wild Dagger bodyshell is fitted with a set of wing mirrors from the Tamiya Fiat 500 in an attempt to make it look a little more scale-like. Next major purchase will be a set of reasonably realistic 1.9 wheels and tyres to replace the ugly buggy wheels/tyres on there at the moment. Further scale bits and pieces will be added when I get around to making them. Even with these very minor mods, the truck is surprisingly good in the rough, even if it is lacking in the scale looks department. Plus, it makes a very good tow vehicle. Edited July 12, 2010 by XV Pilot 1 Quote Link to comment Share on other sites More sharing options...
STdemoniac Posted July 13, 2010 Share Posted July 13, 2010 another pictures Quote Link to comment Share on other sites More sharing options...
l23hyper 7 Posted July 25, 2010 Share Posted July 25, 2010 (edited) hi all. i got a CR-01 a few weeks back i have only just got out with it the other day. never really tried rock crawler before am liking it so far. anyway here are some photos not many tho. Edited July 25, 2010 by l23hyper 7 Quote Link to comment Share on other sites More sharing options...
Dom C Posted July 28, 2010 Share Posted July 28, 2010 About time I posted up some of my comp rig. It's a axial with a swx chassis, Dna dig, losi comp shocks, hb rovers most of the stuff really. Soon to be replaced with A XR10 Quote Link to comment Share on other sites More sharing options...
hyper_8_racer Posted July 30, 2010 Share Posted July 30, 2010 all of the pics look really good Quote Link to comment Share on other sites More sharing options...
STdemoniac Posted September 11, 2010 Share Posted September 11, 2010 some new pictures my landy last month SDR comp winner:lol: another my axial based on TCS X-TRAIL shassis (green cab) more pictures my landy with soft-top and RPP roff light bar (not working yet) and last mods... moce spare wheel on the back Quote Link to comment Share on other sites More sharing options...
seanmcgrath48 Posted September 11, 2010 Share Posted September 11, 2010 Looking very good........... :good: :good: Quote Link to comment Share on other sites More sharing options...
Ash1984 Posted September 19, 2010 Share Posted September 19, 2010 Here's some pictures of my recently acquired Losi Micro Crawler. It's got the DP chassis so no springs and plenty of articulation. I've also got the BWD wheel weight kit, along with their hardware kit and finally wrapped each rim with solder and star cut the foams for mucho rock crawling ability! I must say Don who runs/owns BWD is excellent, fast, courteous and very helpful. Quote Link to comment Share on other sites More sharing options...
TheRustybridgee Posted October 9, 2010 Share Posted October 9, 2010 heres my SCX10 just finished the body today hope you like Quote Link to comment Share on other sites More sharing options...
Syncro Posted October 10, 2010 Share Posted October 10, 2010 I like the DC graphics, looks smart. Quote Link to comment Share on other sites More sharing options...
TheRustybridgee Posted October 11, 2010 Share Posted October 11, 2010 thanks its vaguely based on ken blocks gumball subaru graphics 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.