seanmcgrath48

PM sent

Do you still have the Panda Crawler

Any more photos,, Side , front , rear, close up on wireing ? Sean

Have you tried taking the Tx apart and swapping over the sticks..( it can be done on some Tx's) Sean

If your selling the Blade cpx on it's own,I'm interested..don't need the DX 7.. Sean

Payment sent for msrx.

Do you still have the MSRX ? Sean

It's not what you know,it's who you know.. The Heli is in fully working order,I've saw it fly earlier this year.(when I was first offered it) The spare alone must be worth a good few pounds.. I know the 3D Pro is a few years old now, but that means I don't have to worry too much about breaking it and theres enough spares to keep it in repair for a long while.. Sean

I was given this Century "Hummingbird 3D pro" Heli last weekend,,,,,it's only missing a canopy. Is there any other canopys that fit the Pro? A few upgrades fitted. Belt drive on the tail. These are the spares I got given aswell with the heli. Sean

http://www.banggood....er-p-61607.html Heuy body on it aswell mite have to get meself one.. Allways wanted a R/C Heuy ,ever since I first saw Apocalypes Now.

There around

How about this one.. http://www.horizonhobby.co.uk/aeroonline/e13_blade/e13-blh2000/e13-200sr-x.html I'm thinking about getting one for Christmas.. I've been flying my Blade msx for the last two years and I've got board with it ,theres only so much they can do... OK for pi$$ing about around the house.. Sean

I'd try a 10x6eprop,, get it from Hobbyking UK ,they'd be your cheapest.. For the flaps you can use UHU POR (it's foam safe) glue and perfect for hinges,, or you can use M3 hinge tape(hobbyking).. SEan

Have you used them ?

Most of the guys in our flying club,use Baby Wipes. Then they wipe/clean over again with a cloth before they pack them away,, at the end of there flying day... Sean

There the wing bolts to the fuse ,thats where your servo wires should be coming out.. You will need a thin rod of some kind to thread the extentions wires throu the wing.. Sean

There should be space in the wing where you feed them throu,you may need servo extention leads to reach the receiver.. Sean

Thanks.

I want one...

micro planes , if your room living room is large a good flyer could fly around without crashing into walls Go for a mini Heli or Quad .

Something like this . . http://www.ebay.co.uk/itm/RC-Plane-Thunder-Tiger-Skyzone-Micro-Comet-2-4-GHz-R-C-Plane-RTF-/151166480146?pt=UK_ToysGames_RadioControlled_JN&hash=item2332396f12 or this http://www.ebay.co.uk/itm/Parkzone-Ultra-Micro-Spitfire-Mk-IX-RTF-PKZU2100-UMX-2-4ghz-RC-Plane-/231132849825?pt=UK_ToysGames_RadioControlled_JN&hash=item35d09766a1 Sean

Still no Magazine.. BajaForum UK is your best place to ask any questions.. Sean

If your gonna use a normal house iron to apply the solafilm ,,,, Cut off a piece of solafilm (2" square) Set your iron on med cotton , let it heat up... Place the solafilm on the iron face, if is shrinks up straight away ,,,,,, your iron is to hot. turn down a little and try again,untill it shrinks slowly.. Sean

You can only use 2cell or 3cell with that 2200kv motor and yes get aleast a 40amp ESC. D2826-6 2200kv Outrunner Motor. Motor Specs: Rpm/V: 2200kv Shaft: 3.17mm Voltage: 2S~3S (7.4v to 11.1v) Weight: 50g Watts: 342w Max Current: 34A ESC: 40A Suggested Prop: 7x4(2S) ~ 5x5 (3S) I've been flying my set up on my Assassin flyingwing for over a year flying and a friend has the same set up in his Blixer Get a 40amp ESC from hobbyking UK ,a plush 40 amp ESC will do.. The 2826/6 2200kv motor is a very good up-grade for your blixer , that and a APC 6x4e prop(don't use the cheaper props , they bend / wrap ,while in flight and you loose power) Best Li-Po to get would be Turnigy 2200mAh 3S 30c/40c Li-Pos . Sean

It's up to your self really where you fit your ESC,,,as long as theres some cool air getting to it you'll be all right.. You mite be pushing it with the ESC on amp draw.. What 2200kv motor ? Have you done a Watt test to check Amp and watts. I use a Hobbyking D2826/6 2200kv motor with a 50amp ESC ,APC 6x4e Prop ,1300mAh 3S 25c Nanos ,in one of my Flyingwings (Dopplered ar nearly 90mph)... amp draw is 28amps,,, I wouldn't trust a 2 amp margin if I was using a 30amp ESC... Sean