Popular Post imperialchao Posted May 23, 2023 Popular Post Share Posted May 23, 2023 Today I just finished the last mod I would like to add to my Clod, the shock lift. Now I will just enjoy the bashing and jumping (a little š). Ā Mods that I have done: Ā 1. Axle mounted steering servo F & R. I have to say this improves the truck maneuverability by 500%. Mounting kits are from Ukmonsters. Servo is 25KG torque one from Amazon. 2. Front aluminium bumper to protect exposed steering linkage and servo horn. I added this after the truck hits a rock and bend the steering linkage. Kits from Ukmonsters.Ā 3. 100mm Aluminium shock X8. As clod does not need high performance shocks, some nice looking ones will suffice. But I am still pleased to say that the shock I got from Amazon is actually pretty good for only Ā£35 (https://www.amazon.co.uk/dp/B0816XY4W8?psc=1&ref=ppx_yo2ov_dt_b_product_details).Ā 4. Shock lift (0.5 inch). This is the last mod I added today. After changing the shock, the ride height is too low and the axle mounted servo keeps hitting the chassis (the distance is aroundĀ 1cm). By lifting the ride height, there is about 2.5cmĀ travel distance between the top of the servo and bottom of chassis. Had a test today and it never hits again even with some jumps! Ā Regarding the shock, I see from many threads that the stock shock will be enough. But after changing the Alu shocks I found: firstly the rattling sound of the stock plastic shock (pogo stick) is gone. secondly the truck body is much more stable.Ā Also some say that 100mm shock is ok. In my experience it is too short, especially if the on axle steering is done. The vertically mounted servo (even the top is at the same level with the gearbox top) hits the chassis too easily... So either you can get 110mm shock straightaway or get a 100mm one with a lifter like what I have done. You can clearly see the difference before lifting and after in the pictures below. Ā Here we go. Ā Hope you are enjoying. Ā Cheers, Leo 6 Quote Link to comment Share on other sites More sharing options...
Stormbringer Posted May 23, 2023 Share Posted May 23, 2023 Nice looking truckĀ 1 Quote Link to comment Share on other sites More sharing options...
Bajadre Posted May 23, 2023 Share Posted May 23, 2023 gorgeous looking clod brother šš 1 Quote Link to comment Share on other sites More sharing options...
PumpkinPie Posted May 24, 2023 Share Posted May 24, 2023 Great jobĀ š 1 Quote Link to comment Share on other sites More sharing options...
Candyman Posted May 31, 2023 Share Posted May 31, 2023 Looking good! bumper looks solid šŖ 1 Quote Link to comment Share on other sites More sharing options...
imperialchao Posted June 1, 2023 Author Share Posted June 1, 2023 On 31/05/2023 at 11:58, Candyman said: Looking good! bumper looks solid šŖ Cheers. May I ask are you the guy who runs ukmonsters shop? Quote Link to comment Share on other sites More sharing options...
Grogg Posted June 2, 2023 Share Posted June 2, 2023 This is what I really like about Tamiya, not just the amount of third parties that make parts for their kits, but for also how long those third parties continue to support Tamiya kits, and new ones that pop up to support and build parts for Tamiya kits.Ā Just look at how much after market parts are made by third parties for the Clod Buster alone, that kit/design is just about as old as me, and third parties are still producing new parts for it, carbon fiber and metal chassis/frames for example.Ā I really wish Tamiya did 1/8 scale. Quote Link to comment Share on other sites More sharing options...
Candyman Posted June 5, 2023 Share Posted June 5, 2023 On 01/06/2023 at 20:35, imperialchao said: Cheers. May I ask are you the guy who runs ukmonsters shop? Ā Hiya, yes I am UKMonsters. Let me know if you need anything, happy to help. 2 Quote Link to comment Share on other sites More sharing options...
imperialchao Posted June 5, 2023 Author Share Posted June 5, 2023 On 02/06/2023 at 03:33, Grogg said: This is what I really like about Tamiya, not just the amount of third parties that make parts for their kits, but for also how long those third parties continue to support Tamiya kits, and new ones that pop up to support and build parts for Tamiya kits.Ā Just look at how much after market parts are made by third parties for the Clod Buster alone, that kit/design is just about as old as me, and third parties are still producing new parts for it, carbon fiber and metal chassis/frames for example.Ā I really wish Tamiya did 1/8 scale. Yes I share the same feeling as you. Its probably the only rc monster truck that has been supported continuously for almost 40 years! I was wondering if I should get some spares for the truck, but to be honest I think whenever I need them, I can source it somewhere:). I am wondering what Tamiya will make the new Clod like, if they eventually to make it happen. For solid axle monster trucks, there are famous LMT, Kyosho USA1 2021 version, etc.. They are very powerful and pretty much have all the good features of a monster truck. Can the new Clod find a place to fit in? For now I just bash my old fashioned Clod:) Quote Link to comment Share on other sites More sharing options...
imperialchao Posted June 5, 2023 Author Share Posted June 5, 2023 8 hours ago, Candyman said: Ā Hiya, yes I am UKMonsters. Let me know if you need anything, happy to help. Ah its small world lol. Ok will contact you when needing new modsĀ š Quote Link to comment Share on other sites More sharing options...
imperialchao Posted June 10, 2023 Author Share Posted June 10, 2023 I might have ruined this truck bodyš Ā Other changes recently: Ā 1. 21T brushed motor (0 timing) 2. Steel pinion gear 3. Replace Tamiya connector with XT60 and start to use 2S LipoĀ 4. Rear tyres are glued as Lipo power makes the rim slip... I used silicone seal and its perfect. 5. Waiting for the gearbox guard to arrive 6. Removed the super clodbuster decal and ordered some from Amazon. TBH its worse than I thoughtš¤Ŗ Ā Ā Ā 2 Quote Link to comment Share on other sites More sharing options...
Stormbringer Posted June 10, 2023 Share Posted June 10, 2023 Looks pretty good different but goodĀ 1 Quote Link to comment Share on other sites More sharing options...
RC4WD fan Posted June 11, 2023 Share Posted June 11, 2023 14 hours ago, imperialchao said: I might have ruined this truck bodyš Ā Other changes recently: Ā 1. 21T brushed motor (0 timing) 2. Steel pinion gear 3. Replace Tamiya connector with XT60 and start to use 2S LipoĀ 4. Rear tyres are glued as Lipo power makes the rim slip... I used silicone seal and its perfect. 5. Waiting for the gearbox guard to arrive 6. Removed the super clodbuster decal and ordered some from Amazon. TBH its worse than I thoughtš¤Ŗ Ā Ā Ā Are you running 1 motor or 2 ? as mine came with a copy of thisĀ https://www.modelsport.co.uk/product/hobbywing-quicrun-0880-dual-motor-brushed-esc-80a-waterproof-440053Ā and Iām looking to upgrade the stock motors it says on 2s motor limit is 12t but if using 2 motors double it so can run 2 24t motors I believe the stock ones are 27t ? Ā would that make much of a difference ? or would it be better to get the adjusted amount mounts to use different pinions gears? Quote Link to comment Share on other sites More sharing options...
imperialchao Posted June 11, 2023 Author Share Posted June 11, 2023 5 hours ago, RC4WD fan said: Are you running 1 motor or 2 ? as mine came with a copy of thisĀ https://www.modelsport.co.uk/product/hobbywing-quicrun-0880-dual-motor-brushed-esc-80a-waterproof-440053Ā and Iām looking to upgrade the stock motors it says on 2s motor limit is 12t but if using 2 motors double it so can run 2 24t motors I believe the stock ones are 27t ? Ā would that make much of a difference ? or would it be better to get the adjusted amount mounts to use different pinions gears? I am running 2 21T motors and stock pinion configuration (steel 32DP 13 teeth). The ESC in the kit now is a genuine HobbyWing 880 but pre-programmed (RTR). Indeed the ESC datasheet says motor limit is 24T if using dual motor (the stock silvercan is 27T). But I have read that people are using two 15T HPI firebolt without any problems. I have run my two 21T motors for two weeks and almost 10 full charges (2S Lipo) and everything seems fine. No cutoff, no overheating etc. I also checked the motor temperature regularly and they are mildly hot even doing wheelie or full throttle. What I feel now is this ESC leaves a lot of "reserved" capability. On the other hand, 880 can handle 80A constant current and 400A burst. This is from what I know pretty high for two brushed motor around 20T. To compare, Tamiya sport tuned (23T or 27T with advanced timing) draws around 13A during normal usage. Ā To go "over the limit" or not has to be decided by you as after all it is not within what the datasheet says. Here is the link of the 21T motor (Ā£16) I got from Amazon:Ā https://www.amazon.co.uk/dp/B09NTZPM2L?psc=1&ref=ppx_yo2ov_dt_b_product_details. A lot of other brands use this motor with their own stickers/paints but with a higher price tag. It has an open endbell and ball bearing and comes with 0 timing. I am not sure whether its timing can be changed as the slot showing the timing mark has a plastic notch that prevents it from being rotated. Also I dont know whether the screw holding the end can be slided to rotate the endbell. I have seen some cheap motors that look like the endbell can be rotated but inside there are only two fixed screw hole... 1 Quote Link to comment Share on other sites More sharing options...
RC4WD fan Posted June 11, 2023 Share Posted June 11, 2023 Ah ok Iāll have a look at the motors you linked I was planning on having a play with mine today but got distracted by detailing the car for nearly 5 hours š¤£Ā Ā Iām not looking at silly speed so if you can run the 2 21t motors on 2s fine then that sounds like the way to go špossibly will get the adjustable motor mounts some time down the line as wellĀ 1 Quote Link to comment Share on other sites More sharing options...
imperialchao Posted June 21, 2023 Author Share Posted June 21, 2023 First time painting a lexan bodyš I am thinking to tint the window but not having good idea what to use.. 3 Quote Link to comment Share on other sites More sharing options...
Stormbringer Posted June 22, 2023 Share Posted June 22, 2023 Found thisĀ https://www.modelsport.co.uk/product/core-rc-aerosol-spray-paint-window-tint-394059 1 Quote Link to comment Share on other sites More sharing options...
Kpowell911 Posted June 22, 2023 Share Posted June 22, 2023 Or Tamiya PS-31 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.