Was looking forward to my Outback Mini.....must be a Friday afternoon car!

[AndyBell]

Was really exited to get this in the post today....it ain't right, not sure of the exact issue but take a look for yourself.

 

Send it straight back or is it an easy fix.

 

 

Thanks.

 

Andy.

[Tug]

A bit of tyre wobble? Just run it, I doubt you'll even notice that small amount once it's on the ground and therefore under load. 

[Kpowell911]

Most RC's will do that under no load. that's fine

[tamiyafanboy]

To be honest they vibrate all over the place, I found that putting the metal drive shafts on seemed to calm it down a bit https://ebay.to/3246Nyg

 

 

[AndyBell]

OK,

 

Thanks for the replies chaps, it doesn't come across in the video so well, maybe due to FPS but when the rear wheels are spinning it as if they are struggling/binding.  Kind of looks like they are stopping and starting but really quickly.  Totally different to the front wheels, they seem a lot more free and smooth.  It did seem ok under load and normal running though.

[AndyBell]

If you set the playback to 0.25 on YouTube you'll see what I mean....

[fnknan]

yeah i see what you mean. Definitely not normal.

[Ollykamakazi]

They run nicer on a 1s lipo, bit slower and smoother.


Bash, Break, Build, Repeat...

[AndyBell]

Seem to have sorted it, the guy at the shop said to try taking the rear driveshaft off and popping it back on.....runs fine now, must have not been seated quite right. 

 

48 minutes ago, Ollykamakazi said:

They run nicer on a 1s lipo, bit slower and smoother.

 

It has a 600mah 1s lipo in it as standard....

[Ollykamakazi]

Seem to have sorted it, the guy at the shop said to try taking the rear driveshaft off and popping it back on.....runs fine now, must have not been seated quite right. 

 

 

It has a 600mah 1s lipo in it as standard....

Oops. I’ll have to look at what I did. Not looked at it in 2 years.

There was a thread on here with what some had done.

My mods were on there as well.

 

 

Bash, Break, Build, Repeat...

[AndyBell]

You might have the original Outback mini, mine is the Outback mini 2.0....red driveshafts and shock bodies. 

[Ollykamakazi]

You might have the original Outback mini, mine is the Outback mini 2.0....red driveshafts and shock bodies. 

Mine is the first version.


Bash, Break, Build, Repeat...