johninderby Posted March 8, 2018 Author Share Posted March 8, 2018 Don’t know anyone that bought the brushless. Everyone seems to have bought the brushed and upgraded it. Quote Link to comment Share on other sites More sharing options...
NOFX Posted March 8, 2018 Share Posted March 8, 2018 Yeah. I really don't like blue. I have a 120a esc & 2200kv motor going spare. I thought it'd fit. But it's about 6mm too long . So I nicked the gool combo out of my axxe & popped it in. It dogs a little, but it'll do. Quote Link to comment Share on other sites More sharing options...
rct Posted March 8, 2018 Share Posted March 8, 2018 Quick question about 23t pinions.Has anyone used one on their outlaw either brushed or brushless and what was the outcome/difference please?Many thanks Sent from my SM-G900F using Tapatalk Quote Link to comment Share on other sites More sharing options...
Kilby91 Posted March 8, 2018 Share Posted March 8, 2018 On 26/02/2017 at 14:50, johninderby said: Test run around the car park of the new sensored BL system. The clone IROK tyres handle so much better than the stock tyres. It now slides under hard cornering rather than rolling over. John I noticed you have some torque twist, here's a link to a guy on YouTube that has a pretty good fix don't know if you've seen it or sorted it out yet as I'm taking my time reading the posts. Quote Link to comment Share on other sites More sharing options...
PraetoR Posted March 9, 2018 Share Posted March 9, 2018 17 hours ago, 53HRA said: How are you guys finding the stock brushless combo? Are they likely to go pop in a short period of time? The stock brushless is an Etronix Photon system. Absolutely nothing wrong with that! They are a very solid, affordable manufacturer. The electrics in the brushless are several magnitudes of quality above the awful electrics in the brushed. 14 hours ago, NOFX said: Sorry. Can't help with that un. I fitted a gool brushless system in mine after buying brushed & finding it too slow. Same! Quote Link to comment Share on other sites More sharing options...
just rolling Posted March 9, 2018 Share Posted March 9, 2018 oh no my front diff must of gone, got a locker in rear, have drive to the front right and the rears but very little to the poor front left Quote Link to comment Share on other sites More sharing options...
t2boats Posted March 9, 2018 Share Posted March 9, 2018 18 hours ago, rct said: Quick question about 23t pinions. Has anyone used one on their outlaw either brushed or brushless and what was the outcome/difference please? Many thanks Sent from my SM-G900F using Tapatalk Yep, it makes quite a nice jump up in top speed. Though I fitted this when I converted it to Brushless, and run 3S, so it still has rapid acceleration. Undoubtedly if I were to fit a 17t pinion it would accelerate a little quicker, but top end will suffer. Quote Link to comment Share on other sites More sharing options...
t2boats Posted March 9, 2018 Share Posted March 9, 2018 1 hour ago, just rolling said: oh no my front diff must of gone, got a locker in rear, have drive to the front right and the rears but very little to the poor front left Check the little grub screw on the drive cup which attaches to the diff, might be just come loose. I've had this on several other models over the years. 1 Quote Link to comment Share on other sites More sharing options...
just rolling Posted March 9, 2018 Share Posted March 9, 2018 3 hours ago, t2boats said: Check the little grub screw on the drive cup which attaches to the diff, might be just come loose. I've had this on several other models over the years. that little problem got me a few times in the past lol, not sure what it was but had spare internals so swopped em over, change of grease and its all good again Quote Link to comment Share on other sites More sharing options...
RC4WD fan Posted March 9, 2018 Share Posted March 9, 2018 Just got a new unused never been out the box brushed outlaw for £95 so the savings got the GoolRC BL system 3 Quote Link to comment Share on other sites More sharing options...
just rolling Posted March 9, 2018 Share Posted March 9, 2018 14 minutes ago, RC4WD fan said: Just got a new unused never been out the box brushed outlaw for £95 so the savings got the GoolRC BL system cool, there good fun trucks, i run a locked diff block in rear and love it, think it was less than £2 lol Quote Link to comment Share on other sites More sharing options...
PraetoR Posted March 9, 2018 Share Posted March 9, 2018 Cracking deal! I'm 100% sure you'll enjoy your ownership. Quote Link to comment Share on other sites More sharing options...
Nickarla Posted March 9, 2018 Share Posted March 9, 2018 57 minutes ago, RC4WD fan said: Just got a new unused never been out the box brushed outlaw for £95 How? Quote Link to comment Share on other sites More sharing options...
NOFX Posted March 9, 2018 Share Posted March 9, 2018 Bugger . 35 quid less than I paid Quote Link to comment Share on other sites More sharing options...
rct Posted March 9, 2018 Share Posted March 9, 2018 Yep, it makes quite a nice jump up in top speed. Though I fitted this when I converted it to Brushless, and run 3S, so it still has rapid acceleration. Undoubtedly if I were to fit a 17t pinion it would accelerate a little quicker, but top end will suffer. Many thanks boats that what i was after.Sent from my SM-T210 using Tapatalk Quote Link to comment Share on other sites More sharing options...
NOFX Posted March 9, 2018 Share Posted March 9, 2018 Just ordered a couple of lipos & a connector for the outlaw .& a few lipos for mine & little uns mini monster trucks. Hopefully the weather'll clear up next week for some quality time with mini mayhem Quote Link to comment Share on other sites More sharing options...
Nickarla Posted March 9, 2018 Share Posted March 9, 2018 2 hours ago, NOFX said: Bugger . 35 quid less than I paid Probably second hand, no warranty...not that a warranty is worth anything anyway. Quote Link to comment Share on other sites More sharing options...
NOFX Posted March 9, 2018 Share Posted March 9, 2018 Yeah. I've never had any luck with warranties . Not to worry. Spares are plentiful & cheap Quote Link to comment Share on other sites More sharing options...
johninderby Posted March 9, 2018 Author Share Posted March 9, 2018 Any new RC I get usually gets modded right away thus voiding any warrantee anyway Quote Link to comment Share on other sites More sharing options...
RC4WD fan Posted March 9, 2018 Share Posted March 9, 2018 4 hours ago, just rolling said: cool, there good fun trucks, i run a locked diff block in rear and love it, think it was less than £2 lol The diff looker that you can buy looks very much like an axial one got one of them so will try that if not then out with the blue tack 4 hours ago, Praet0r87 said: Cracking deal! I'm 100% sure you'll enjoy your ownership. I've not been this excited for an RC for a while the more I read about it the more excited I get only got to page 8 out of the 59 4 hours ago, Nickarla said: How? Was an auction on eBay so it's is technically second hand but never been out the box and used the final price was £95.01 just got the waiting game to play now 3 Quote Link to comment Share on other sites More sharing options...
Nickarla Posted March 9, 2018 Share Posted March 9, 2018 (edited) Nice, let us know what you think when you get it. Edited March 9, 2018 by Nickarla 1 Quote Link to comment Share on other sites More sharing options...
seanv Posted March 9, 2018 Share Posted March 9, 2018 My Got myself a outback change to a 10kg servo . On full lock going forward fine reverse and gets stuck on er forgot which side. Tried all sorts of variations of the little shaft on front even bought aluminium end axles for structural integrity. Only happens in reverse most times . Quote Link to comment Share on other sites More sharing options...
seanv Posted March 9, 2018 Share Posted March 9, 2018 Also change to the crap stock and still the same Quote Link to comment Share on other sites More sharing options...
NOFX Posted March 9, 2018 Share Posted March 9, 2018 1 hour ago, RC4WD fan said: The diff looker that you can buy looks very much like an axial one got one of them so will try that if not then out with the blue tack I've not been this excited for an RC for a while the more I read about it the more excited I get only got to page 8 out of the 59 Was an auction on eBay so it's is technically second hand but never been out the box and used the final price was £95.01 just got the waiting game to play now Watch " king of the hammers" & ultra 4 . That'll get ya even more excited 2 Quote Link to comment Share on other sites More sharing options...
RC4WD fan Posted March 10, 2018 Share Posted March 10, 2018 20 hours ago, NOFX said: Watch " king of the hammers" & ultra 4 . That'll get ya even more excited I have and I am 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.