Andrew_91 Posted May 31, 2020 Share Posted May 31, 2020 (edited) Hi Guys, Roller SOLD Remaining items below with Prices + Postage at buyer expense Spare ST pro CNC parts and One proper CNC Knuckle with fitment/ use marks and one non CNC one & Front shocks - £110 - based on pricing online for what is available Front Diff Casing New - £13 each Rear Diff Casing New - Two Available £13 each Three Diff assemblies - Used, Cups in good condition - £15 each Spare Standard Shocks - £20 for all 10 shocks Standard Knuckles - Two Right Available - £3 each Diff Outdrive Cups - Two Available - £4 each Centre Cup Joint Set - New - £4 Each Pinion Gear - 4 Available £10 each DE Racing Rear skid plates - £5 O-ring set - £2 each Used Hobao TX & RX - £20 Spare set of non Pro wheels. have been glued and aren't great, one has a hole in it. - £15 Happy to do a deal for combined items. If you have any questions leave a comment or drop me a message I'm located in Croydon if anyone is local Roll on the pictures Edited October 29, 2021 by Andrew_91 1 Quote Link to comment Share on other sites More sharing options...
Andrew_91 Posted June 1, 2020 Author Share Posted June 1, 2020 Bump - To the Top Would consider offers for roller and spares only and ill keep the Motor & ESC. Quote Link to comment Share on other sites More sharing options...
MiRaGe112 Posted June 2, 2020 Share Posted June 2, 2020 How much as a roller? Quote Link to comment Share on other sites More sharing options...
Andrew_91 Posted June 13, 2020 Author Share Posted June 13, 2020 Bump Quote Link to comment Share on other sites More sharing options...
Andrew_91 Posted July 8, 2020 Author Share Posted July 8, 2020 Bump Quote Link to comment Share on other sites More sharing options...
Andrew_91 Posted August 21, 2020 Author Share Posted August 21, 2020 Bump, Updated with sold items. Quote Link to comment Share on other sites More sharing options...
Andrew_91 Posted September 13, 2020 Author Share Posted September 13, 2020 Still For Sale Guys Quote Link to comment Share on other sites More sharing options...
capri-boy Posted September 14, 2020 Share Posted September 14, 2020 £20 inc post for the 3 sets of diff internals? Are the front knuckles new or used? Price on there own? thanks Quote Link to comment Share on other sites More sharing options...
GorillaZilla Posted September 17, 2020 Share Posted September 17, 2020 (edited) Alright aye 👍 What does the standard spare joblot include? I love having extra Gubbins to experiment with, Right now I'm tinkering with chassis bracing, You can do some amazing stuff with the rear turnbuckles with the longer bend end piece on both ends. Right now I'm putting 4 extra braces on, 2 either side of the rear brace to bulkhead connection, to the two rearmost of the 4 screws of the center diff mount, then something very similar for the front. I like using the longer bent plastic turnbuckle ends, with the hollows filled with shoegoo because they flex and squish a bit on impact, and act like extremely stiff short travel shock absorbers that allow a little, High resistance chassis flex to dissipate the energy without letting the chassis flex so far that it stays bent or kinks a driveshaft.. Beats pure Alu chassis bracing that just transfers the energy to another part that then breaks... Pretty lightweight too, that along with using slightly smaller lighter 4000mah batteries with higher C-rating to compensate helps as well. Edited September 18, 2020 by GorillaZilla Quote Link to comment Share on other sites More sharing options...
Nickarla Posted September 18, 2020 Share Posted September 18, 2020 On 14/09/2020 at 19:10, capri-boy said: £20 inc post for the 3 sets of diff internals? Are the front knuckles new or used? Price on there own? thanks I had pmd at the start about those knuckles. Was told they’re not for sale separately Quote Link to comment Share on other sites More sharing options...
GorillaZilla Posted September 23, 2020 Share Posted September 23, 2020 (edited) I could use the Wingmount pieces Because I'm going to double up the wing mount "plates" by using a hacksaw to cut off the "screw to bulkhead" section of the extra set of "plates" and the bit that extends to the rear chassis brace, as well as shave off a bit at the back so they fit against the non recessed part of the shock tower... Then shoegoo them together (while also filling the holes in the plates with shoegoo, by putting tape over one side of the spaces and pouring the shoegoo in till it fills the space. And then replacing the stock spacers in between the two sets of "plates"with shorter stouter non thinned 20mm long M4 Nylon spacers to compensate for the thicker "plates" with a few M4 washers to fine tune the length and an M4 flat nut to fill in the hex shaped hole in the plates. Then use 50mm and 60mm long fully threadded M4 Bolts and Nylock nuts + washers through the whole thing to hold it tight and stronk as Buull !. If you are using an RTR Hyper ST you can use a 3.5mm Drill bit to drill down into the wing mount screw holes, extending them through the Gearbox Shocktower mounting lugs, and then though the shock tower support structure itself, and use a longer screw, making it a LOT harder to pull out, to go with your strengthened wing mount structure. Then to help protect against upside down landings while moving forwards where the wing mount can get pulled backwards maybe some marine grade steel cable ties going around lowermost spacer between the plates and then around the shock tower horns, with just a little slack so the wing mount can flex a fair way, but then pull on the shock towers and flex those and hopefully stop the wing mount reaching its breaking point. https://www.ebay.co.uk/itm/QUALITY-STAINLESS-STEEL-CABLE-TIES-MARINE-GRADE-METAL-ZIP-TIE-WRAPS-EXHAUST/114127340446?var=414384787432&hash=item1a9285039e:g:acMAAOSwC4BecmLv I also use those steel cable ties around the motor to the center chassis brace, with a flat rubber lump between the chassis and the motor, helps keep the motor in place in lawn dartings and heavy back end landings. For great robustness! Edited September 23, 2020 by GorillaZilla Quote Link to comment Share on other sites More sharing options...
Andrew_91 Posted October 13, 2020 Author Share Posted October 13, 2020 (edited) Still for Sale Guys Edited October 13, 2020 by Andrew_91 Quote Link to comment Share on other sites More sharing options...
capri-boy Posted November 1, 2020 Share Posted November 1, 2020 PM'd Quote Link to comment Share on other sites More sharing options...
mak01 Posted November 3, 2020 Share Posted November 3, 2020 Payment sent for front/rear driveshafts, centre propshafts and front right knuckle. Thanks Quote Link to comment Share on other sites More sharing options...
Andrew_91 Posted March 14, 2021 Author Share Posted March 14, 2021 Bump Quote Link to comment Share on other sites More sharing options...
RG1 Posted March 15, 2021 Share Posted March 15, 2021 Interested in the wheels tried to message you but you can't accept them, think you need to delete some old messages. Quote Link to comment Share on other sites More sharing options...
Andrew_91 Posted March 15, 2021 Author Share Posted March 15, 2021 3 minutes ago, RG1 said: Interested in the wheels tried to message you but you can't accept them, think you need to delete some old messages. Hi, i have deleted old messages, could you please resend? Quote Link to comment Share on other sites More sharing options...
RG1 Posted March 15, 2021 Share Posted March 15, 2021 Wondered if you would accept £15 posted for the wheels as I will have to remove the tyre from the rim to put a patch over the hole from the inside. Do you have any other wheels for sale. Cheers Quote Link to comment Share on other sites More sharing options...
sunny Posted March 15, 2021 Share Posted March 15, 2021 what exactly is left for sale please Quote Link to comment Share on other sites More sharing options...
Andrew_91 Posted March 15, 2021 Author Share Posted March 15, 2021 1 minute ago, sunny said: what exactly is left for sale please Hi Sunny, Everything listed/ in the pictures is available except the TX/RX and the Wheels, both of which are pending payment. Quote Link to comment Share on other sites More sharing options...
Bert_w164 Posted March 15, 2021 Share Posted March 15, 2021 Hey buddy, Would the shocks fit a Hyper 7? I've got a front shock with a bent pin... Quote Link to comment Share on other sites More sharing options...
Andrew_91 Posted March 16, 2021 Author Share Posted March 16, 2021 9 hours ago, Bert_w164 said: Hey buddy, Would the shocks fit a Hyper 7? I've got a front shock with a bent pin... Im not sure im afraid, i wouldn't like to say they did and they didn't. Sorry. 1 Quote Link to comment Share on other sites More sharing options...
Andrew_91 Posted October 25, 2021 Author Share Posted October 25, 2021 Bump - Open to Offers on what is left. Collection is preferred from Croydon but can post. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.