capri-boy Posted October 14, 2017 Share Posted October 14, 2017 Quote The PRO-MT 4x4 is unlike any other Monster Truck available because it was designed from the ground up to have the highest quality components and the best performance right out of the box. No need to spend tons of money on upgrades like all the other trucks available… the PRO-MT 4x4 has the upgrades you need already included making it the best value for the money! Every part of this 1:10 Monster Truck was designed from Day 1 to handle today’s extreme brushless power systems, including insane 1:8 Motor Systems and 4S LiPo Power. This has never been done in a truck of this size and Pro-Line is proud to bring it to you! The PRO-MT 4x4 comes as a Pre-Built Roller, so you just install your own electronics by following the included Instruction Manual, paint your body with your favorite paint job, and Go Have Fun! If you are ready to graduate up from the Ready-to-Run vehicles that currently occupy the 1:10 Monster Truck market and you want true next-level Performance the PRO-MT 4x4 is the truck for you. The PRO-MT 4x4 does not include electronics, paint or the tools required to operate or maintain the truck. Pro-Line PRO-MT 4x4 1:10 4WD Monster Truck Pre-Built Roller Product ID: 4005-00 Quote View full news article Quote Link to comment Share on other sites More sharing options...
Pistonhead Posted October 14, 2017 Share Posted October 14, 2017 Don’t care what anyone else says, i’m pre-ordering asap Quote Link to comment Share on other sites More sharing options...
mydoddy69 Posted October 14, 2017 Share Posted October 14, 2017 (edited) The guys over at Big Squid have some more pics on of it, apparently it’s hitting the streets at $399 so no doubt if we see it it will be around £450 ? For a1/10th scale monster truck kit that’s a bit steep imo time you add electrics lipos paint you could be looking at £6-700 which is crazy https://www.bigsquidrc.com/its-a-beast-pro-line-pro-mt-4x4/ Folks thought I was mad spending a bit more than this on 1/8th so you must be completely nuts to spend it on a 1/10th so where’s my wallet lol Edited October 14, 2017 by mydoddy69 Quote Link to comment Share on other sites More sharing options...
mond Posted October 14, 2017 Share Posted October 14, 2017 Meh, it's a buggy with big wheels and a truck body. It's not a monster truck. Quote Link to comment Share on other sites More sharing options...
bertberr Posted October 14, 2017 Share Posted October 14, 2017 If it does rrp at 399 usd then its only 50 usd less than an MT410, which as we all know is more 1/8 than 1/10, so... not great value when you put it in that context. VXL Stampedes come in around 399 usd too, but obviously RTR, and while I'd expect the Proline to out perform the Stampede, the Pro MT will need to be mighty good to justify the extra folding, IMO of course 1 Quote Link to comment Share on other sites More sharing options...
Oh How Original Posted October 14, 2017 Share Posted October 14, 2017 *wipes up dribble* I kinda want it! Not a big fan of 1/8 MTs myself, so it has appeal over bigger stuff, regardless of price. Out of interest, who makes the MT410 @bertberr ? Somewhere in between 1/10 and 1/8 might be a good option for me. Quote Link to comment Share on other sites More sharing options...
capri-boy Posted October 14, 2017 Author Share Posted October 14, 2017 MT410 would be the tekno I believe Dan. 1 Quote Link to comment Share on other sites More sharing options...
.AJ. Posted October 14, 2017 Share Posted October 14, 2017 I'm guessing it's the same size as the Outcast and MT410??? Or Stamapede size? Edit, just seen it has 2.8 tyres, so it's stampede size ish Quote Link to comment Share on other sites More sharing options...
sunny Posted October 14, 2017 Share Posted October 14, 2017 As much as I like Pro Line this is not a MT, to me a MT should have no centre diff and be absolutley mental, leave the handling and precision to race buggies Quote Link to comment Share on other sites More sharing options...
Oh How Original Posted October 14, 2017 Share Posted October 14, 2017 20 minutes ago, sunny said: As much as I like Pro Line this is not a MT, to me a MT should have no centre diff and be absolutley mental, leave the handling and precision to race buggies It won't handle that great anyway, it definitely won't be that precise Quote Link to comment Share on other sites More sharing options...
rushboy2004 Posted October 14, 2017 Share Posted October 14, 2017 Based on my experience with the original PMT. The shocks will leak if you look at them. - I gave up putting oil in them. The spur gears will strip for a pass time. Part support in the UK will be non-existent. Quote Link to comment Share on other sites More sharing options...
mydoddy69 Posted October 14, 2017 Share Posted October 14, 2017 1 hour ago, Oh How Original said: *wipes up dribble* I kinda want it! Not a big fan of 1/8 MTs myself, so it has appeal over bigger stuff, regardless of price. Out of interest, who makes the MT410 @bertberr ? Somewhere in between 1/10 and 1/8 might be a good option for me. The MT410 is made by Tekno it’s a 1/8th scale it runs a 1/8th buggy (1/10th sct ) Chassis and 1/8th truggy arms etc .. For what this proline will cost I’ll stick with my MT410 which will far outperform this lol 4 minutes ago, rushboy2004 said: Based on my experience with the original PMT. The shocks will leak if you look at them. - I gave up putting oil in them. The spur gears will strip for a pass time. Part support in the UK will be non-existent. There different shocks and they ditched the pathetic 48 pitch spur and pinion and went mod 1 but yep non existent uk parts support is pretty much guaranteed lol 1 Quote Link to comment Share on other sites More sharing options...
Oh How Original Posted October 14, 2017 Share Posted October 14, 2017 1 minute ago, mydoddy69 said: The MT410 is made by Tekno it’s a 1/8th scale it runs a 1/8th buggy (1/10th sct ) Chassis and 1/8th truggy arms etc .. For what this proline will cost I’ll stick with my MT410 which will far outperform this lol There different shocks and they ditched the pathetic 48 pitch spur and pinion and went mod 1 but yep non existent uk parts support is pretty much guaranteed lol That depends what you want, performance and needs is a very personal thing if you're happy with your MT410, you don't really need this, as it'll likely be basically the same but a bit smaller. I'm still keen, but not if it's £400-450 for the basic kit in the UK. Unless RCmart have some kinda sale, then I can orer the electrics and everything. Quote Link to comment Share on other sites More sharing options...
Fly In My Soup Posted October 14, 2017 Share Posted October 14, 2017 (edited) Bit underwhelmed..... Edited October 14, 2017 by Fly In My Soup Quote Link to comment Share on other sites More sharing options...
bertberr Posted October 14, 2017 Share Posted October 14, 2017 Thing is, they're not basically the same, even if they're a similar size externally. The tekno is a 1/8 that's been put in a hot wash. Mechanically it's mega beefy, as you'd expect with that 1/8 lineage, even shocks are 16mm big bores. I don't dislike the whole Pro MT thing but this really needs to be a little cheaper IMO. 1 Quote Link to comment Share on other sites More sharing options...
TerrorTrooper Posted October 14, 2017 Share Posted October 14, 2017 Doesn’t look anything special to be honest. Especially at that price range. Quote Link to comment Share on other sites More sharing options...
just rolling Posted October 15, 2017 Share Posted October 15, 2017 10 hours ago, rushboy2004 said: Based on my experience with the original PMT. The shocks will leak if you look at them. - I gave up putting oil in them. The spur gears will strip for a pass time. Part support in the UK will be non-existent. based on that its a no from me for that price, ad rather go the outcast or tekno Quote Link to comment Share on other sites More sharing options...
.AJ. Posted October 15, 2017 Share Posted October 15, 2017 I want to see some proper lid off shots, I did see PBS front suspension..... Quote Link to comment Share on other sites More sharing options...
Fly In My Soup Posted October 15, 2017 Share Posted October 15, 2017 Here you go Quote Link to comment Share on other sites More sharing options...
Si Coe Posted October 15, 2017 Share Posted October 15, 2017 The Tekno is (literally) an 1/8th scale buggy dressed up as a 1/10th truck. This isn't - because Proline don't make a 1/8th buggy but its still clearly built like one. Its not an MT but that goes for a lot of other designs too. There isn't really a collective name for these jacked up, non-racing but performance orientated trucks. I'm sure its going to be good, I'm not as sure who's going to buy one. It costs 1/8th money, it will need a similar sized space to run as a 1/8th based truck since its only a little smaller and just as fast and its going to have limited support. You've got to really want a very slightly smaller truck to go for this one. Quote Link to comment Share on other sites More sharing options...
Gaz! Posted October 15, 2017 Share Posted October 15, 2017 I'll stick with my stampede 4x4 although it does look very well put together..... Quote Link to comment Share on other sites More sharing options...
Oh How Original Posted October 15, 2017 Share Posted October 15, 2017 Off topic but where would be the cheapest place to look at ordering the MT410 right now? Had a quick look around but only seems available stateside? Will wait for a definite confirmed price on this though, I love my 2WD version to be honest, regardless if some say it's not really an MT blah blah blah, it's good fun, puts a smile on your face and that's all any RC should do 1 Quote Link to comment Share on other sites More sharing options...
bertberr Posted October 16, 2017 Share Posted October 16, 2017 I couldn't see the mt410 on the uk tekno dist' website when I last looked, not sure if they're still bringing it in or it's just the link that's gone walkies. theres always tower with intl' cust' coupon discount. With shipping and vat would probably work out similar to what it used to cost in the uk. Quote Link to comment Share on other sites More sharing options...
collective itch Posted October 16, 2017 Share Posted October 16, 2017 it may be a bit steep, but really looking forward to this. Have the pro mt 2wd, and its taken an absolute beatings with virtually no breakages apart form a rear bumper piece and a front spindle. Anyone have an idea when be available in the uk? And yes I'm hoping parts support is there for it, and they also continue with parts of the 2wd pro mt. Quote Link to comment Share on other sites More sharing options...
Oh How Original Posted October 16, 2017 Share Posted October 16, 2017 Hopefully the price won't be ridiculous. I'm struggling to find anything else to compete, the MT410 isn't in stock anywhere I found it. Stampede is out for me, not into Traxxas personally and don't like how it looks anyway. Arrma now offer the Mega Granite 4x4, but don't think it'd hold up to a brushless system and abuse I'd give it. Anything else I'm missing? Without turning this into a wanted advert Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.