Jump to content
  • Join our community

    Sign-up for free and join our friendly community to chat and share all things R/C!

Traxxas Stampede. Huge Spec Brushless - Now Splitting 19/3


Kpowell911

Recommended Posts

Hello, I have decided to sell my heavily upgraded Traxxas Stampede. The Stampede is possibly my favourite ever R/C, Ive owned at least 5 in the past and I can genuinely say this is the most complete one I have built. I have been considering thinning out my crowd the past week, and I honestly didnt expect to come to this conclusion, but I'm simply not using it as the condition shows.

 

This started life as a Traxxas Bigfoot, opened on Christmas Day. It has had less than 1 full lipo through in its combined use. It also has the following electronics:

 

Hobbywing Max 10 SCT (boxed from Modelsportuk in 2017)
Castle 3800kv 4 Pole motor (box include)
Power HD 20kg Waterproof Servo
Turnigy 10,000mah 40-80c 2s 7.4v Lipo.

The Truck then has the following Upgrade to the chassis.

 

Traxxas Aluminium Big bore Suspension with Nitride shock shafts

Proline Protrac Slash Race Lower A-Arms . This widens the stock Stampede and allows you to run Front wheels all round.
Proline Protrac Adjustable Turnbuckles

 

Traxxas Wheelie bar
Traxxas Blue Aluminium Wheels Bar Wheels.

Traxxas Raised ESC Mount
Traxxas Raised Battery posts

 

STRC Blue Aluminium Front Shock Tower

STRC Blue Aluminium Rear Shock Tower
STRC Blue Aluminium Front Castor Blocks
STRC Blue Aluminium Front Steering knuckles (with 5x11 bearings)
STRC Blue Aluminium Front Bulkhead

STRC Blue Aluminium Rear Hub carriers (with 5x11 bearings)
STRC Blue Aluminium Heatsink Motor mount

STRC Blue Aluminium Wheel Hexes
STRC Closed Cap Hardened Suspension Pins


KimBorough Servo Saver
Revo Slipper + Pads
VXL Gearing
RPM Blue Gear cover

 

Proline Badlands on Desperado Wheels (front Wide offset all round)


The body shell is a Proline Ford Raptor F150. The paint job is poor, but the shell is 1 run old.

NO RADIO IS INCLUDED.

 

I will not split the electronics unless you sort it out between yourselves and It all ends up going for asking price

£350 posted which is effectively the same price as a brand new Stampede VXL. You may not have a radio included, but there is a far superior brushless system and £££'s of upgrades.


D366E56F-DE96-4489-88ED-471A07F3216D_zps

 

 

BFB1E302-370B-461A-ABE6-1CE18424A1A9_zps

 

6BDBA149-E00F-41A8-95C8-C6FCF9820BC5_zps

 

4AF98364-56E1-44D8-A0F5-8C386DDCA4C6_zps

 

615F8BF1-507C-422D-9C13-7FB097DB82D6_zps

 

4DB880BA-4DA1-4AF3-A02A-1FC461E5E080_zps

 

F4186154-A584-4FC3-BA7F-654078840232_zps

 

602A1F7D-7C23-4E32-980E-7D40A6E5D149_zps

 

07B038D7-F54D-4E63-BC18-150E6661EBF7_zps

 

 

 

 

 

 

 

Edited by Guns
Link to comment
Share on other sites

Hello. It didnt sell it is still available as I/the seller noticed that the rear driveshaft had twisted. Considering it hasn't even had a full lipo throughout I wouldn't be confident selling this to someone with this set up.

I'm looking into upgraded driveshafts but Im thinking the best way to do it is to sell the electronics separately then offer as a roller for someone to put slightly less mental electronics in it.

 

I'm after

Futaba R203GF RX £28 Posted

Hobbywing Max 10SCT ESC With Traxxas Plug. Boxed. £50 posted

Castle 3800kv motor with 3.17mm shaft. Boxed. £50 Posted
Turnigy 10,000mah 2s 40-80c Lipo. £40 posted

I will then sell the roller when Ive sorted the driveshafts.

 

So a Bump to the top!

Link to comment
Share on other sites

12 hours ago, Guns said:

Shells arent worth selling seperate mate. Postage is a nightmare so its pointless whn you factor in £6.50 postage. 

 

ESC has gone, lipo and motor are now removed from roller :)

 

502CA0EC-5FF6-4D13-80C4-251236709D77_zps

 

46BC06BC-6C11-4E63-BBEE-2073988543FC_zps

 

 

No worries mate.  Worth an ask :-)

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...