MAZ Posted November 29, 2013 Author Share Posted November 29, 2013 This is too weird, I'm off. Yeah, wangerman started something awful... So back on topic chaps... Gonna clean up the motor tonight, seal around the carb and check the backplate too. Gonna take the cooling head off and have look at the top of the piston. I have no idea if the engine was even broken in - hopefully it was How reliable is the transmission on the savage 25? Quote Link to comment Share on other sites More sharing options...
Feedtheinferno Posted November 29, 2013 Share Posted November 29, 2013 Good on you dude. I may have some spare savage spares I don't need anymore laying around PM if you need me to look for anything and you can have them Quote Link to comment Share on other sites More sharing options...
MAZ Posted November 29, 2013 Author Share Posted November 29, 2013 Good on you dude. I may have some spare savage spares I don't need anymore laying around PM if you need me to look for anything and you can have them You're a legend mate Quote Link to comment Share on other sites More sharing options...
Oh How Original Posted November 29, 2013 Share Posted November 29, 2013 Did you miss Pauls very generous offer? Quote Link to comment Share on other sites More sharing options...
MAZ Posted November 29, 2013 Author Share Posted November 29, 2013 Did you miss Pauls very generous offer? Ummm.... I dunno?! I will go back and check Quote Link to comment Share on other sites More sharing options...
MAZ Posted November 29, 2013 Author Share Posted November 29, 2013 Do you mean shudson or thunderwolf? Quote Link to comment Share on other sites More sharing options...
ant b 4 Posted November 29, 2013 Share Posted November 29, 2013 i may have some savage parts,but i had the x and the flux hp so not sure if theyd fit Quote Link to comment Share on other sites More sharing options...
MAZ Posted November 29, 2013 Author Share Posted November 29, 2013 I have no idea lol - I've never owned a savage before Quote Link to comment Share on other sites More sharing options...
Oh How Original Posted November 29, 2013 Share Posted November 29, 2013 I meant Thunderwolf... Not sure if you just didn't see his reply or not but he offered to buy some parts for the Savage I would do the same if I wasn't so strapped for cash at the moment. Quote Link to comment Share on other sites More sharing options...
Leeds savage Posted November 29, 2013 Share Posted November 29, 2013 Hi, put up a list of what you need when you get to the bottom of the grease - I sold/gave away all my savage parts but I am happy to buy/chip in to help get it running bud. Cheers Quote Link to comment Share on other sites More sharing options...
MAZ Posted November 29, 2013 Author Share Posted November 29, 2013 Hi, put up a list of what you need when you get to the bottom of the grease - I sold/gave away all my savage parts but I am happy to buy/chip in to help get it running bud. Cheers Will do mate I've got a pdf version of the manual but if anyone has a proper one that they're not using then I'd definitely be interested in it! Loosened up the carb slide as it was really stiff Also took the head off - what do you think? How many shims are supposed to be under the button head? Quote Link to comment Share on other sites More sharing options...
MAZ Posted November 29, 2013 Author Share Posted November 29, 2013 I cannot pull the sodding carb off! Quote Link to comment Share on other sites More sharing options...
supersavage Posted November 29, 2013 Share Posted November 29, 2013 I have 3.5cc engine out of my old savvy somewhere if I can find I'll send to you. I don't know if it still works but if I can find it you can use for parts. Sent from my iPhone using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
MAZ Posted November 29, 2013 Author Share Posted November 29, 2013 Cheers man - dont worry for now as I have a back up engine TT 28. Pro Although saying that - I might need the carb if I destroy this one lol Quote Link to comment Share on other sites More sharing options...
supersavage Posted November 29, 2013 Share Posted November 29, 2013 Ok. I'll have a look for it any way and if I find it I will let you know. Sent from my iPhone using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
Trans4Mation Posted November 29, 2013 Share Posted November 29, 2013 maz from memory these carb have a cotapin type pin like old bike cranks it needs to be in the right place to realese the carb. good luck on the rebuild great read so far.bud Quote Link to comment Share on other sites More sharing options...
supersavage Posted November 30, 2013 Share Posted November 30, 2013 I have found the engine and sent you a pm. Sent from my iPhone using Tapatalk 2 Quote Link to comment Share on other sites More sharing options...
MAZ Posted December 2, 2013 Author Share Posted December 2, 2013 Just a little update - the backplate and carb are now sealed, crankcase is a little less disgusting and greasy. The owb was covered in oil so cleaned that up. I put it back together, the rota start spins counter clockwise to make the flywheel spin counter clockwise - thats right isnt it? Just cleaning the pipe up now. So far I think I'm after some drive cups as the ones on the truck are pretty worn, a gasket for where the pipe hooks up to the motor, a 6v battery pack and maybe some bulletproof diffs (havent got round to checking them yet but they sound like a must have hop-up) Oh and a manual!!! Looking through 68 or so pages on my phone is most annoying!!!! I'm going to run the engine on 25% byrons, using an OS.8 plug - should be okay shouldn't it? Quote Link to comment Share on other sites More sharing options...
Noj Posted December 2, 2013 Share Posted December 2, 2013 Coming along very nicely Maz. Are you not able to use a tablet/lap top to view the PDF? Quote Link to comment Share on other sites More sharing options...
barnetbasher Posted December 2, 2013 Share Posted December 2, 2013 can you link me to the drive cups marion ? I may have some in the swamp of spares you know only too well ! PS Noj..I dont think he's allowed on a real computer..something about prawns or sommat ? Quote Link to comment Share on other sites More sharing options...
MAZ Posted December 2, 2013 Author Share Posted December 2, 2013 (edited) The engine and pipe after damn good cleaning! Coming along very nicely Maz. Are you not able to use a tablet/lap top to view the PDF? I tend to use my phone as someone is always using the laptop - I also find it quicker to flick through a real life manual can you link me to the drive cups marion ? I may have some in the swamp of spares you know only too well ! PS Noj..I dont think he's allowed on a real computer..something about prawns or sommat ? Did you want me to fnd the part number? There are pics on the second page if that helps Edited December 2, 2013 by MAZ Quote Link to comment Share on other sites More sharing options...
barnetbasher Posted December 2, 2013 Share Posted December 2, 2013 nuffin on page two..but..are these the sausages ? >> http://www.ebay.co.uk/itm/New-HPI-Savage-X-SS-4-6-AXLES-DRIVE-CUPS-output-shafts-differential-diffs-/331068314223?pt=Radio_Control_Parts_Accessories&hash=item4d1535926f Quote Link to comment Share on other sites More sharing options...
2pricey4u Posted December 2, 2013 Share Posted December 2, 2013 I have have a rubber a rubber gasket for the engine/exhaust seal left from when I had a savage x 4.6 free to good home if your interested Quote Link to comment Share on other sites More sharing options...
Noj Posted December 2, 2013 Share Posted December 2, 2013 Shiny and clean, super job! I agree that a paper manual is king....learn to leave the shellfish alone in future ;-) Quote Link to comment Share on other sites More sharing options...
MAZ Posted December 2, 2013 Author Share Posted December 2, 2013 Prawns, shellfish blurgh!!!I have have a rubber a rubber gasket for the engine/exhaust seal left from when I had a savage x 4.6 free to good home if your interested Yes please! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.