Leaderboard
Popular Content
Showing content with the highest reputation since 21/04/24 in all areas
-
6 points
-
5 points
-
5 points
-
Kit arrived from Amazon in the US in 4 days Also picked up a set of J Concepts Renegade tyres on Aggressor rims from MS And a nice AGFRC servo from SMD Motor and esc wise I’ve got a Castle Copperhead in my parts box, I’ll probably pair it to a Castle 1412 2100kv and run 3s No idea on the body yet, this is a longer term project so progress might slow after the initial kit/roller build 👍5 points
-
5 points
-
5 points
-
5 points
-
Lowered the blazer high trail. Looks better than the stock height. Still needs a little more. Fitted some 1.9 beadlocks with the largest 1.9s I had. Removed the bump stops. The rear is fine. The front will need a short bump stop to stop the front tyres rubbing. Has a load of articulation.5 points
-
5 points
-
5 points
-
since the rc 10 is so expensive i went and bought a tamiya wild one instead :)5 points
-
5 points
-
5 points
-
Took the G Wagon for an evening crawl on Hunstanton beach earlier and watch the sunset. Got a couple of nice shots as well. My fingers are just getting their feeling back now, it's quite cold out.5 points
-
4 points
-
4 points
-
4 points
-
4 points
-
Servo is excellent, loads of power Combo is amazing, the low control and drag brake and holding power is excellent, plenty enough wheel speed on 2s with a 18t pinion Tyres worked well Could do with a touch more weight up front, brass knuckles would sort that Overall I’m really happy with the build, one thing I’ve said to myself is this isn’t a shelf build, so it won’t be getting the normal AJ post running clean up, a quick brush down and that’s it 👍4 points
-
4 points
-
Afternoon all. It’s been a while.. I dug my 10.2 out of its retirement ‘home’ (a box in the spare room) the other day…and I’m thinking a resurrection is on the cards 🤔4 points
-
Fitted the Bronco body. The front bumper is on backorder so I've fitted the one in the picture for now.4 points
-
I cannot deny their following so they must be fine, BUT I just wish they had a different brand name……4 points
-
4 points
-
4 points
-
More crawling. Put some steel beadlocks on the sendero. Definitely improved performance.4 points
-
4 points
-
Finally fitted the heavy duty links, a twin motor winch and put 5000 weight silicon diff oil in the shocks to try and control the insane body roll. Off to SST pay and play tomorrow, can’t wait.3 points
-
3 points
-
Outside, shot a thin coat of some random lexan paint as a primer and then some Hycote Matt black paint that was £6 off Amazon 👍3 points
-
The fusion is amazing I can set cruise control on the TRX4 and TRX6 and it keeps same speed no matter what as with the TRX6 below3 points
-
3 points
-
3 points
-
3 points
-
3 points
-
3 points
-
3 points
-
3 points
-
Springs and stock servo mount to lower a Trx4 high trail, Trx4m parts and brass hexes for the sendero. And check out the name on these injora tyres for the Trx4m...3 points
-
3 points
-
3 points
-
3 points
-
3 points
-
Im hearing rumours that MJX are bringing out a 1/10th hypergo MT, and that it will trash Arrma bl3 stuff as full metal gears all way through and 4S out of box, should be a total winner3 points
-
3 points
-
3 points
-
3 points
-
Probably about the same run time for me. One of mine has the traxxas esc with traxxas battery. I've not seen an adapter for sale anywhere. The injora esc comes with various connectors so you can use a Traxxas battery, any 2cell with a balance connector (which is really handy) or you can solder on which ever you prefer. Overlander do a 450 and 850 mah battery that fits directly in the Trx4m battery tray but doesn't have the stupid traxxas connector. I would highly recommend the injora esc for the reason mentioned and it's super smooth. I know you might not want to replace the esc but that option frees you up to use most batteries.3 points
-
found this on modelsport you could make your own adapter lead out of it https://www.modelsport.co.uk/product/injora-micro-bec-for-1-18-trx4m-13551263 points
-
3 points
-
Member Statistics