Leaderboard

Took mine out to an old field I know of from when I where a lad, it ran like a champ, the floureons where excellent, & I'm now practicing full length field wheelies! It's a total blast this truck & tough too, I did a pretty big cartwheel across the field after a wheelie went wrong & I though it was a day ending crash. But nope on it went!!

Too much! 1/10th combos, 1/5th Combos, 1/8th combos, servos, arms, turnbuckles, chassis', light sets, shocks, pinions, wheels and tyres, bodyshells, hardware..... Possibly 10 or so unbuilt boxed kits too!

Hello All, Hope nobody minds but just thought I'd show a few of the shells I've painted for people. I normally hang around on Oople. Any questions feel free to ask and comment.

My hornet

: sWorkz Evo 2 : Engine : X-ACT .21 sportive Servos : Savox SC-1627MG x2 Pipe : Some novorossi thing RX : Sanwa MX-V Body shell badly painted by me SMD Evo starter box

Maverick Strada xt brushless rc car complete ready to run. Selling my much loved and not used lot maverick strada xt brushless rc car. Its in lovely used condition, perfect order and complete with controller and i will throw in a 4hr charger for 2 or 3 cell lipos. Very quick and responsive car, not been abused, just drove outside house on tarmac. will package well and send by pacelforce 48 delivery. any questions please ask. Ideal first brushless car or second basher. thanks for looking Louis £85 posted

No probs

Here's videos for you mate.

No mate it was just on the recommended vids at the side, cant stand watching people life's lol

Theres a few tell tale signs

Someone has been quite liberal with an industrial airbrush! Looks like a rebranded Henglong and you have the RX18 or a derivative so changing the RX/TX setup is not possible but it could be a native 2.4ghz version with the black handset but can't really tell. Someone may have come up with a solution but at least in years gone by, there wasn't one other than replacing the MFU. I think the cheapest option to use your own RX/TX is the Clark TK60 but I've never used one so can't really comment on how good they are. Elmod, IBU, Tamiya all get quite expensive. Elmod and IBU have some awesome features though, like custom sounds, BECs, lipo cut offs and programmable channels etc. Maybe a good opportunity to put a little grease on those gears. They look dry. Don't use too much or it will go all over the insides if your tank.

Sold the nitro and got myself a flux truggy! Sent from my iPhone using Tapatalk

Cheek for binding or maybe somethings come loose then failing that try a new steering setup there's some cheap on eBay

Cheers fella sadly he has the old style ones I'm after the new ones Op-0083N I've a had another set on order with a Hobao for a few weeks now and the order still says processing lol so it might be a while before anymore are released .. Im after replacing the dog bones to these new cvds all round as the just so much better, but thanks for the heads up You might want to try adjusting the servo link and the steering links sounds like you got one or both unequal. How you finding that link fella made much of a difference on turning radius for you ?

Took it off the shelf. Unpacked all the charge gear. Got the lipo's out. Put it all on the table. Stood back and looked at it. Packed it all back up. Really can't be bothered. There's a good 1/2 hour I won't get back. At least I got round to putting the bullets on the spare motors that have been sat in their boxes since about June.

Glad your enjoying it Jim, to be honest I've ditched the X Maxx and gone back to bashing this instead if the truth be told, it's just a shed load more durable and give me more fun factor as I'm never worried it will break lol .. These new cvds are awesome fella just a pity they've become like chickens teeth to get hold of

You can buy from this guy: http://www.rctankelectronics.com/store/p34/TARR_Smoke_Unit.html. He also makes IBU which is a good alternative MFU.

The Polish bloke does Tarr smokers. The ones I've had work pretty well.

You'll need to ditch the stock board and fit an Elmod or something similar... The stock board will take 2s lipo, but has no lvc, so fit a buzzer. Stock smoke machine is crap, upgrades available from some Polish bloke on ebay, makes a big difference and is plug and play. Have an issue with the track tensioners coming loose on mine, so beware....

A bit more done lift motor fitted and prop cutdown to 3" Rudders These are the ESC's that will be powering her.... The car ESC is for the thrust motor so I will have reverse Im waiting on a few bits and pieces before I can progress any further with the build....

I got a maverick strada evo s xt for sale brudhless rtr. If interested DM me.

My finger slipped and got this! Panther G tank! Sent from my SM-G935F using Tapatalk

Do you have anymore pictures of this please?

can is 70mm long by 37mm across

PMT rims are for the protrac suspension, if that helps doddy??

I think I'll at least try the Power HD for now

Hobbywigs have never worked out for me. As Doddy below I have to have my esc's at 3.5v to cut correctly. Any lower and it doesn't kick, my battery discharge rate could've done with being less me thinks. I myself prefer it that way tbh. Works well for me, I have it set at 21.2v for 6s and cells are bang on 3.7v when they come off every-time. I've only encountered a dramatic difference if I've taken the cells below 3.4v resting voltage. If an esc had a 3.5v individual cutoff option that would be fine too but the Hobbywings only have 3.6 & 3.4 no in-between so it's either too early or way too late. I will try out an alarm at some point to see how reliable they are.

Will update on the chassis some point soon That's all folks

Quite normal for the steering links, designed to be a "servo saver"

I have mine on the max 6 set to default but I use a lipo alarm which I set to 3.5v and plug it into one of the balance leads as a safe gaurd .. I do thus on all my rcs to be honest and there only a few quid so well worth the investment

Got a MF-01X now :

..............well u gota ask aint u....if u don't ask u don't get.....sum times u jus know how it`ll go...so i play the waiting game....sum times u win.......other times u loose............

yep....was offered it at 85....but I thought ``..I`ll wait n see if it drops.``....it did.....80....75...70....I offered 65 being me.....he said no.......so I left it ....few days later....``ok mate ...65 it urs``.....result......

they do pop up but u have to wade through all the overpriced pos to find the good ones......and that can take a good while.....I took wks n wks to find mine....a very very tidy 2014 5b ss local to me....well sorted and loads of spares for a sweet price....

to be honest its nice to find a place where you can get help and even if you ask something daft not have someone talk down to you like i have found on other forums in the past lol

lol...I don't like using brand new stuff...esp shells.....sounds nuts.....but I`d rather buy tidy used ones then I`m not so worried at bashing the crap outa em....I got 2x brand new v4 mt shells here atm I bought off toddfg .....gonna fit one on my brushless dbxl ithk.....I have sum fg square hubs for it...so jus need sum mt wheels now......would love a set of v4 mt ones but there mega rare n loads of money...

A rather nice four year old Transit Connect, 2012 model, 47k, mint condition. I couldn't be happier with it. It has racking and a vice in the back. A ladder rack on the roof, and also a conduit/trunking tube on the roof. And also a 240 Volt, 350 Watt inverter in back. Sorted!

A little video but YouTube has wrecked the quality

Are the robust an fast. My dad has a carnage are they simpler in size speed etc. Can they be upgraded easily

Discontinued model. It is based on some other, generic Chinese made rig, so spares may be available that way. Much as it pains me to say it, the FTX is probably better.....

I painted this back in maybe 96,believe it or not,i got offered £650 for it in 2006 and foolishly turned it down lol still one of my fav`s though.

Repeat order

Very old ones

Thanks guys, all comments and feedback most welcome.