Leaderboard

Not today but Saturday. WP_20150308_007 by mick e 1188, on Flickr WP_20150308_008 by mick e 1188, on Flickr Oh yes I'm happy.

Grab your receipt....brush up on the Sale of Goods Act .... and get back there for a refund. 1) Odds on that is not a new piece of gear...it's been modded and had at least the connectors replaced. no factory ever shipped soldering that bad. Not even the cheap Chinese toy grade stuff. A bit of heat shrink would sort that...but they didn't bother 2) Based on the age of the stuff, it's been sat around fora long time! 3) I would say for sure it's been fitted into something, probably a plane ... which would explain both the chopped back wiring and the removal of the plastic outer. That's the sort of thing you would do to fit it into a very tight space. 4) It clearly doesn't work properly, and is either knackered or just totally unfit for the use you are putting it to. Unless the guy sold it to you for a fiver as something he had 'lying around' that might sort you out .... and if he didn't tell you anything about the stuff done to it...then he's got a bit of explaining to do!

Iv sent him a video of me doing what i said at the top, it comes straight off no bother, pull the horn in line with the bar, it will only go one way then lift it and you'll ear a click, first bend, and then its off the second bend, lol! Its not difficult, its just the same as a few throttle linkages that was on some old bikes very similar anyways Servo horn removel: this is a baja im working on at the minute, its not mine!

I recently caved an got back into RC when I saw a Vorza going for a decent price on ebay. I'd wanted one for the speed when I was first playing with RC's again, but I couldn't justify the expense. As most will know, it isn't that easy to resist when you see something though! It was only when I searched on the MSUK forums for some other Vorza's that I found the Hobbytech DS3 shell on one in the "Show us you Buggy" thread. It was almost as if I was supposed to own this car - because I was instantly reminded of this thread: http://www.msuk-forum.co.uk/topic/163571-hobbytech-18-citroen-ds3-rally-body-shell/?hl=hobbytech I think you can see where this is going! So this is the plan: A lot of work will be needed - I can't get in touch with the bloke on here who did the previous conversion to find how he made his body mounts, but I am looking forward to this one. If I can do it justice, I may even get it signed by Liam himself at the World Rallycross event at Lydden in May. Here is the base and the shell roughly placed over it. I had to source the shell from Spain as there are not many left about. I can't screw it up! And here are the wheels I chose. Pretty impressed. Asia tees are awesome! Delivered in about a week and very cheap! I hope this is not clogging up the board. I think people can probably tell I am quite excited!

Yep... I know... Another?! All part of a plan, which I doubt anyones interested in so I won't go into. In any case, it arrived today and so I thought a thread was in order.

If you're used to any colour so long as its black, how bout this movie icon? http://www.blogcdn.com/www.autoblog.com/media/2011/03/smokey-and-the-bandit-semi.jpg

Yeah mate she be fine lol, boys n there toys is all she says, we did have a good chat though fella. Im in the middle of my second gelande 2 build lol, i did actualy cock up the first body lol so ive just ordered another, hopefully this will turn out better this time, i tried fitting a don jarr bonnet buldge and it went proper tits up lol. Anyways fella, when the weather warms up a little we will have to try and get out with them for a run, maybe try and shoot some trail scale video, that would be cool you cant have to many scale trucks, its addictive.

Niiiiice congrats fella on your latest purchase Uve seen mine in the flesh so to speak, there a gorgeous kit, shocks feel a little sticky at first but soon loosen up and become nice and smooth. Enjoy the build mate.

I've ordered myself an X12 ... they look cute and are just silly cheap If you are feeling flush...there is always the Blade Pico QX. Supposed to be pretty good.

looking nice

Fitted the new Rhino on steering duties and relegated the 5765 to throttle/brakes

loads of updates, to be honest too many to post all at once im sorry i haven't been on the forum for ages its just i have no time for the hobby at the mo which makes me sad in a way. i will post some of the most up to date photos and it has changed dramatically. spent all of my money on her and am nearing completion just have a interior to do. If you want to see the whole build i have it on a website that shows all of my pictures with descriptions of what ive done going back to the very start of the project. https://www.getpatina.com/vehicles/yZqhCrABQK

Well flown that mate, I can't even fly my nano round my living room without crashing LOL

No, but i've used Nanda blocks on buggy rims - they've been great but aren't always well glued. Please report back on these,

In the nano size I just picked up one of these for

You cant go wrong with a Rhino. just be 100% sure epa is set right.

X4 V2 is great fun, if he can fly a heli he should take to it well. Be prepared to change motors yourself though Jim, i've had one burn out in prob 2hrs flight time (not crash damage). Parts via banggood are tres cheap, just order a crash pack and spare props in advance.

this was last year mate, all gone now sorry.

Bit more progress. The body mounting has been sorted out. At the front built a channel where the front cross-member slots into. At the rear built a locating block that the rear of the frame fits around and then used a small servo arm screwed into the block. The arm rotates to clamp the cross-member in place. The body fits on or off in a couple of seconds and no unsightly body posts. John

will do mate,hope to get one in the next week or so

That breather will do the job nicely AJ!

Awesome!!

Mr VRS - did you buy all available stock from somewhere, to make a few quid, or make a mistake by adding couple of zero's to your order....? The Losi XXL's are so easy to spanner on compared with other MT.

got the lights in vary basic lights running from a spear Chanel but only temporary light bar fitted witch can be turned on/off from the control the sound unit is in and working its great bit of kit it has nice turbo whistle too when I can work out how to upload a vid I will now on to the next thing trailers do I get one of these https://astecmodels.co.uk/catalog/product_info.php?cPath=133_148&products_id=1882&osCsid=8bfa2be72b8e8b353ad0c2209a82acda or convert a bruder low loader would obviously have to stretch it anyone done it

Yea it did mate,

Little clip of my S50, I love them had 83 at one point lol. S50 Hooning: Only have 3 now

A vague question, with a flat out answer which didn't help me in the slightest to know what is going on....!

Got to agree they are great cars, prefer the MX5 myself but it goes without saying they are both very much recognised as girly cars. But why should that bother you if you enjoy it? That being said, what response did you expect from a male dominated forum such as this where the majority of us are very much into our cars, the ridicule was inevitable Also just to join in

Same seller as last time, visited his site on 15/01. Doesn't actually list that combo on the site...dubious, IMO. Very poor show indeed, to the vat with him and his shoddy back stock selling!!!

Soaring again at Whitsands. Having fun flying with the SAS Wildthings and decided to get a little bit too involved! Took an hour or more till i found the gopro in the grass! God fun though.

Killswitch ordered, time to stop the spending now! Next is alloy FiD clutch carrier & engine mount, but not just yet.

Good post fella... the body seems a bit of a nightmare..! Following this to try and get a few tips...

http://youtu.be/eFI2AMc1W-g

Found it, it's not a fake. Looks like it was produced / cloned off a schulze future esc: It doesn't seem to have a lvc for lipo , though a 2S lipo shouldn't have overvolted it. It looks to date to around 2003 and part number seems to be ORN63000 or ORI63000 or 630001 for a pro version. The shoddy labeling probably suggests they just bought and repacked the schulze, If it is the schulze it's not very powerful relative to modern stuff, and the lack of fan or even decent heatsink suggests it needed to be placed in a large amount of airflow. That it's a dual purpose air/land only further supports this. It seemed to have a rrp of

Looking around, as i've nowt else to fill my time tonight atm, there have been some micro esc's that aren't dissimilar, though I can't find one similar to this. So far the closest match, going back to 2001 is this: I cant get a better photo but you'll note the black heatsink but the receiver wires are the usual white black red, (like Orion seem to use) not the black brown orange like the op's. It's not this, as this one doesn't have the dip switches to program but it's the closest yet. Orion avionics esc's look similar, though have a blue heatsink, black red white receiver wires and hard soldered motor leads - on the ones I've found anyway. I'm intrigued.

That's got a short written all over it, don't go running that mate.

I think it's the moving rider that gives them the cool factor. Not perfect by any means but a really nice rc bike model. Still a huge following for these in Japan. Some of the mods they do are fantastic.

I had run mine and broke it before yours even turned up

Was ALOT of fun - plenty of carnage and alot of rubbing door handles. 5 laps with a joker goes quick!! :-D Sadly no videos were taken, we'll get some next time.

As long as you like it thats what counts Dont matter what i think *cough Hairdresser *cough lol

That must have been a bunch of fun! I wish I had WR8 brethren around my parts to run with... Did anyone take video of the race?

Pic at the start of our WR8 Rallycross race!!

unsinkable ?? yer so was the titanic

think i might be joining you

Love that DriftMog!

The Slashes HCG - now retired and is a shelf queen, The shell is to nice to bash with. (not painted by me) LCG - just received a new shell that is covered in truck bed-liner. Hopefully more than one bass session.