Leaderboard

The tank is mint,only been run to test, hopups are Impact torsion bars Hentec Tension adjuster Metal Tracks Alloy Gun 2xnew motors to give scale speed It comes with a Futaba tx and batts also spares which include Impact gears with stock moters fitted and run in with toothpast on the bench,this is collection only willing to travel up 30mile radius of Brid,

This morning I received a brand new Spektrum DX3C transmitter courtesy of Modelsport. My old one that I got 3 years ago was acting a bit odd so I sent it in for repair. However rather than repairing it and trying to charge me, they sent me a replacement free of charge! I know they are merely doing their duty, and every shop should do likewise in such a situation in terms of the Sales of Goods Act. However I appreciate it when a company does the right thing straight away without the customer having to fight for it in court. Definitely going to keep supporting Modelsport!

well after much deliberation i decided to build a truggy, specifically a D8T a truck which i have always wanted and finally today most of the parts arrived, i'm not going mad on hop ups as i knwo the D8 is pretty bomb proof, I have gone for innovative rc diff cases, tekno centre coupler, rc monster brushless conversion, a hitec wp servo, tbr bumpers front and rear with wheelie bar, also being fitted are alloy front spindles and rear hubs along with shock guards. power will come from a castle mamba monster max 2200kv combo and 6s and control from my DX4S

Welcome!! As above, keep an eye on the West Yorkshire section and try pop along to one of the local meets, always nice to have new faces there

Afternoon everyone. My wife is the manageress of a small shop and has organised a charity even to raise money for Southampton's children's hospital, the event will be based around getting children and their families in to donate in return for raffle prices and lucky dips. All of which have been donated by the shop she runs. However she has a small request and I know there are people on this forum with the ability to help if they were inclined, she is asking if anything can make 100 x thank you stickers, 50 with a boys design and 50 with a girls, of course paying for them is fine, she isn't asking for them to be free but we would need someone to help her produce and send them out before next weekend. Can anyone help? Thanks

great strong truggy's. 2200kv on 6 that's gonna be rather warm .

It looks like it's struggling off the line was that full throttle from neutral of rolling on the throttle?

You have the factory settings. They are the factory settings. Why don't you just sort it with me this weekend and stop stressing yourself out about it? We will get it working don't worry

Nice same conversion I used on mine great truggy.

Just seen the other posts ................. !!! Al.

Not the postie, but just bought it today from my LHS, for my 8x8x4, very happy indeed New toy to play with

Mate you were lucky you didn't lose the car or any fingers when that pack let go!!!

You get that with the better large scale servos bud, being the savox or hi-tech you can either buy a upgraded larger mount or cut the mount. Most cut it It will only be marginally wider.

MEEEE

Link doesn't work for me I think I got a vid of you on the oval

Edit: front chassis brace not located at one end, rear chassis brace missing...

I've never had to replace the stock gears on a CC-01. They seem to hold up really well so I've never seen the need for the steel gears. John

Had a go at covering the bonnet with vinyl last night and wasn't happy with the out come, so back to plan A I rubbed down the bonnet with fine sand paper and then shot a very light coat of lexan paint, when it went off I put a coat of Acid Etch primer over the top, I'm off to Halfords to look at a top coat paint, more than likely I'm going to finish the bonnet in Bed Liner paint

Looks great! Seems like you've got yourself a fairly decent lawnmower!! Night shots are good - must have looked weird to passers-by!! Al.

Well I have fired her up at bhbf, what a sound from the Bartolone engine and pipe, had a huge smile Shakedown testing went very well, it all works properly 1st time and no breakages. I had to gear up to 20/54! for a 29,5cc. So another upload to youtube, becoming a habit lol. Enjoy btw if anybody has any footage from bashfest, would be grateful if you can post it up, thankyou

sorry to hear about being ripped off pal. the landy was starting to look good too. maybe put it hold and take your time. would be shame to waste the time and effort you put into it now. as per previous posts too. i run the stock shocks too. they perform ok for what i want, no leaks too lol. think im upto 4 scx now and no sign of any being sold. lol

Thanks. I need to drop them an Email anyways, so il ask and see what they say.

Took that with ease. Can you fit a sound generator in it??? Smoking exhausts????

Unboxed it, took lots of pictures, looked at it more, started a parts list in my head...

So its due in stock tomorrow, who's going to be placing an order or receiving their order within the next few days? I wont be!

Been revamping the Wraith Fitted an EXO rear light pod and carbon wrapped the panels

Well...glad it is fixed. ...but this thread shows how hard it can be to diagnose a problem with the written word...and even pictures...

Cheers, sorted the roof issue What do y'all think?

All the advice given regarding disposal of lipos is good solid advice. When I say bin it I obviously mean correctly and safely, the bin men have a right to safety too.

this is what i do discharge first outside using a bulb or motor then stick in salt water.

The landy tops are not rc4wd, there made in china and was originaly made for a toy grade rc.

Got up things a Summit couldn't??? I put it to you that your friend wasn't trying hard enough, and was clearly using crawler mode instead of balls out mode Glad that mattress I dumped is still providing comfort and rest to the masses, must make another trip with our other knackered bed - storage drawers on this one, perfect for crack, H, foil, glue etc...

If funds allow I'll send you a PM bud, my 1:1 needs new injectors and its wiped me out this month! few more piccys, just got the body posts to cut down im loving the stance

I was looking through all my bits today and found needle bearings from a nitro engine clutch, and what do you know, They fit perfectly! I'd imagine they will be hardened due to this and after about 20 minutes running, they haven't failed yet!

"Skid marks", never not funny!

And i thought having 4 projects was alot to juggle...Not for some (see below) :

No just for the eb4 i got the mt4 looking just how i wanted it to