joshhh Posted July 29, 2023 Share Posted July 29, 2023 I got a tamiya lunchbox kit a while ago and i love it however i would like to make it faster and nipier, to my understanding a brushless motor would acheive this. If so my lucnhbox seems to have been shipped with a brushless ESC and i was wondering what sort of motor i need, i know it needs to be a 540 to fit but with the power aspect, would i also need a new battery as i just have the tornado 2000 battery pack wich i dont beleive is a lipo and yet again i beleive a lipo should give me more power if so is there any suggestions for reasonable batteries or motors any help would be greatly appreciated Quote Link to comment Share on other sites More sharing options...
Stormbringer Posted July 29, 2023 Share Posted July 29, 2023 Just changing to lipo will give you a little extra oomph this 1 should fit https://www.modelsport.co.uk/product/gens-ace-lipo-car-hard-case-2s-74v-4000mah-60c-bashing-with-t-type-deans-1345629 But changing to lipo youl need a charger for charging lipos This 1 will do lipos or nihms https://www.modelsport.co.uk/product/skyrc-e680-ac-dc-80w-charger-440716 and after using the lipo always do a storage charge on it and charge it in something like this https://www.modelsport.co.uk/product/overlander-lipo-safe-sack-38313 Quote Link to comment Share on other sites More sharing options...
joshhh Posted July 29, 2023 Author Share Posted July 29, 2023 for the lipo it appears to have a different fitting do i need a different esc or is there like an adaptor cable? or a fitting i could solder on? Quote Link to comment Share on other sites More sharing options...
Stormbringer Posted July 29, 2023 Share Posted July 29, 2023 Theres this (im assuming its a white Tamiya conector on the Lunchbox https://www.modelsport.co.uk/product/etronix-female-tamiya-to-male-deans-adaptor-39232 or you can get these https://www.modelsport.co.uk/product/overlander-deans-connector-plugs-5-pairs--393853 Quote Link to comment Share on other sites More sharing options...
joshhh Posted July 29, 2023 Author Share Posted July 29, 2023 thank u sm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.