BashingBrian Posted February 5, 2023 Share Posted February 5, 2023 I just really wish Traxxas had put even a basic interior in it..!! 1 Quote Link to comment Share on other sites More sharing options...
Kpowell911 Posted February 6, 2023 Share Posted February 6, 2023 11 hours ago, BashingBrian said: I just really wish Traxxas had put even a basic interior in it..!! Or just smoked the windows lol. Id prefer Black window sickers that you could peel off and reveal clear windows for those who like interiors/models inside. 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Davy Crockett Posted February 9, 2023 Popular Post Share Posted February 9, 2023 Whoops! 🤣 5 1 Quote Link to comment Share on other sites More sharing options...
Davy Crockett Posted February 9, 2023 Share Posted February 9, 2023 ^^^^ been on order for a while and finally picked up today. Had its big brother for a good while and now scaling a few bits down ready for 3D printing this weekend 🙂 I for one am pleased by the clear windows....!!! 2 Quote Link to comment Share on other sites More sharing options...
Stormbringer Posted February 9, 2023 Share Posted February 9, 2023 nice interior mate 1 Quote Link to comment Share on other sites More sharing options...
Davy Crockett Posted February 11, 2023 Share Posted February 11, 2023 Just finished printing interior, I know it's LHD but will do for now. I'll mirror it in software and reprint when I get chance Get onto exterior bits next 👍 2 Quote Link to comment Share on other sites More sharing options...
Stormbringer Posted February 11, 2023 Share Posted February 11, 2023 that will prob look great when painted up 1 Quote Link to comment Share on other sites More sharing options...
Gaz! Posted February 12, 2023 Author Share Posted February 12, 2023 Ooh, i can feel a order coming on lovely little trucks though aren’t they? 1 Quote Link to comment Share on other sites More sharing options...
Davy Crockett Posted February 17, 2023 Share Posted February 17, 2023 On 12/02/2023 at 12:59, Gaz! said: Ooh, i can feel a order coming on lovely little trucks though aren’t they? 🤣 I'll send you an order form 😂 Great little rig, only had 5 mins on the table course but performed very well Quote Link to comment Share on other sites More sharing options...
Popular Post Davy Crockett Posted February 17, 2023 Popular Post Share Posted February 17, 2023 Managed to grab a bit of time each night after work and done a bit of printing and painting... Also moved lights from front bumper into headlights and added 3mm red LEDs fir rear lights Interior Shackles and air intakes Moved jack and rear shackles Ladder Sand ladders Scale bits 6 Quote Link to comment Share on other sites More sharing options...
Kpowell911 Posted February 17, 2023 Share Posted February 17, 2023 That interior is better quality than the one in my Mrs real Defender 90 haha 1 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Kpowell911 Posted February 20, 2023 Popular Post Share Posted February 20, 2023 *David Attenborough Voice* “Here, we have the Adult TRX 4, with two babies in tow” Shame theres people in the background here, looks scale! 4 3 Quote Link to comment Share on other sites More sharing options...
Alex97 Posted February 22, 2023 Share Posted February 22, 2023 How did you find the TRX4m got on compared to the full sized one? Quote Link to comment Share on other sites More sharing options...
Popular Post Davy Crockett Posted February 22, 2023 Popular Post Share Posted February 22, 2023 Managed to grab time to do a bit more to the little Landy... LEDs in and wired up struggled to find a decent driver so printed next best thing 🤣 Lights!! 6 1 Quote Link to comment Share on other sites More sharing options...
Popular Post Alex97 Posted February 25, 2023 Popular Post Share Posted February 25, 2023 (edited) I bit the bullet and ordered one, the plan was to fit my own ESC and RX and leave it pretty stock. That part lasted an hour or so! So far I've ordered... Holmes hobbies 66t toquemaster motor Tx4 servo 2x 850mah CNHL 2s lipos Bearings Metal steering LEDs Brass gear cover Brass links Low range gears The detail on the body is excellent, I've also printed the interior however I might not run this yet as it adds a lot of weight uptop. I really hope they get the rights to manufacture a modern 90 defender or at least the 110. Edited February 25, 2023 by Alex97 6 Quote Link to comment Share on other sites More sharing options...
Popular Post Alex97 Posted March 20, 2023 Popular Post Share Posted March 20, 2023 Tracks finished, I'm not 100% happy with the quality of the tracks themselves however they work and being totally honest I doubt they'll get much running however I think that they look cool. I've also fitted the lights into the buckets in the body rather than the bumper and added two red lights to the back, I think I'll also end up ordering a little light bar as well. 4 Quote Link to comment Share on other sites More sharing options...
Popular Post Mr Brightside Posted April 2, 2023 Popular Post Share Posted April 2, 2023 It’s spring lads 4 Quote Link to comment Share on other sites More sharing options...
Popular Post ostewart Posted April 16, 2023 Popular Post Share Posted April 16, 2023 Changed the tyres and wheels, it's actually now running the same tyres as pictured but with white wheels again as they look better. Injora steel beadlocks with brass inner rings, brass c-hubs, injora stainless high clearance links and bearing kit. Brilliant little truck, but still needs a bit more weight down low, knuckles and diff covers should do it. 5 Quote Link to comment Share on other sites More sharing options...
Popular Post Gaz! Posted April 21, 2023 Author Popular Post Share Posted April 21, 2023 Managed to get some running/testing done, over the moon with it initially but found bits needing some attention. I’ve done the heat shrink mod on the drive shafts, moved the front lights since but have plenty more to do. It drives so smoothly and quiet compared to some others ive owned. one really big gripe is why not include bearings as standard?? I get budgets need to be kept to but come on. At the price point it would have deffo been the one to buy if this was sorted. anyway, couple of pics from the other day, I will update with the next round of mods done (at some point) 4 Quote Link to comment Share on other sites More sharing options...
Mr Brightside Posted April 21, 2023 Share Posted April 21, 2023 Let’s there be lights 3 Quote Link to comment Share on other sites More sharing options...
Stormbringer Posted April 21, 2023 Share Posted April 21, 2023 Looking good mate and cant wait for mine to arrive 2 Quote Link to comment Share on other sites More sharing options...
Popular Post Mr Brightside Posted April 21, 2023 Popular Post Share Posted April 21, 2023 Been waiting all day for this 4 Quote Link to comment Share on other sites More sharing options...
Stormbringer Posted April 21, 2023 Share Posted April 21, 2023 The lights look really bright Have you got a roof bar on it ? Quote Link to comment Share on other sites More sharing options...
Mr Brightside Posted April 21, 2023 Share Posted April 21, 2023 3 minutes ago, Stormbringer said: The lights look really bright Have you got a roof bar on it ? No just the pro scale light kit 1 Quote Link to comment Share on other sites More sharing options...
Stormbringer Posted April 21, 2023 Share Posted April 21, 2023 My light kit got dispatched today and ive fitted a lightbar on mine so cant wait to see it in the dark now lol 1 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.