RG1 Posted July 10, 2017 Share Posted July 10, 2017 (edited) After some 1/10th dog bone drive shafts for my HPI Maverick. Stock ones are 100 mm but they keep popping out so after some slightly longer ones. Edited July 10, 2017 by RG1 wrong length Quote Link to comment Share on other sites More sharing options...
Fly In My Soup Posted July 10, 2017 Share Posted July 10, 2017 @Zannu might be able to help, he makes dogbones 1 Quote Link to comment Share on other sites More sharing options...
Zannu Posted July 10, 2017 Share Posted July 10, 2017 Erm, when he says "makes Dogbones" what he really means is I made one, however I may be able to help. So all I really need is the shaft length (End to end) and pin distance (Pin centre to pin centre) then I can try and make some that will fit. And does that mean you will want a set of 4? No guarantee I can make them, or that they will be strong enough, but I will see what I can do to help. Also makes a fun project so I can start to learn what I can and what I can't do. If you don't mind waiting a while for postage, there are a few options on Ebay: https://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR0.TRC0.H0.X105mm+dogbone.TRS0&_nkw=105mm+dogbone&_sacat=0 Quote Link to comment Share on other sites More sharing options...
Gaz! Posted July 11, 2017 Share Posted July 11, 2017 Might have some, will have to check though.... when you say 105mm, is that pin to pin? Quote Link to comment Share on other sites More sharing options...
RG1 Posted July 11, 2017 Author Share Posted July 11, 2017 No that dimension is the total length any thing between 100 to 105 mm would be better than the stock ones. Quote Link to comment Share on other sites More sharing options...
Gaz! Posted July 11, 2017 Share Posted July 11, 2017 I shall have a look tomorrow and let you know Quote Link to comment Share on other sites More sharing options...
dazp1976 Posted July 12, 2017 Share Posted July 12, 2017 I can only find 101mm. Have you tried putting some 0-rings in the cups? 1 in each will limit how far the bone can slide. Worth a shot Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.