evssv Posted September 17, 2014 Share Posted September 17, 2014 (edited) now my revo conversion is off the cards on cost grounds..... I still wanna do sumin,....so I jus happened across this last nite on ebay with 44 mins left.....http://www.ebay.co.uk/itm/Rc-Car-/251641338870?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2047675.l2557&nma=true&si=jGVdV10xjZoKTwM8cohBUW0zJo0%3D&orig_cvip=true&rt=nc I already got this one with a 5.2cc force motor in it..so I`m gonna do a bl conversion on the roller from ebay.....gota 150amp esc lined up....and waitin on a lepord 4284 2000kv motor to b bak in stock...so I jus need a motor mount and a losi lipo tray and that should b that..... ... Edited September 17, 2014 by evssv 1 Quote Link to comment Share on other sites More sharing options...
Nitroholic Posted September 17, 2014 Share Posted September 17, 2014 Can't argue with the price you paid for the roller Quote Link to comment Share on other sites More sharing options...
Noj Posted September 17, 2014 Share Posted September 17, 2014 Bargain! Quote Link to comment Share on other sites More sharing options...
evssv Posted September 17, 2014 Author Share Posted September 17, 2014 (edited) Can't argue with the price you paid for the roller I put Edited September 17, 2014 by evssv Quote Link to comment Share on other sites More sharing options...
evssv Posted October 14, 2014 Author Share Posted October 14, 2014 (edited) I have now got the tray,new wheels....esc mount..diff/motor mount installed..jus waiting on the motor now... Edited October 14, 2014 by evssv 1 Quote Link to comment Share on other sites More sharing options...
evssv Posted October 21, 2014 Author Share Posted October 21, 2014 (edited) so my motor and bits have arrived at last from dollorhobbzy.....now i can get on with it......hope I got sum 4mm connectors in me boxof leccy bits....result...3 matching ones...sweet...all soldered up....esc mounted...motor mounted...jus rx box and trat to go!! Edited October 21, 2014 by evssv Quote Link to comment Share on other sites More sharing options...
evssv Posted October 21, 2014 Author Share Posted October 21, 2014 (edited) gonna test run it in a bit hopefully.....I thk the centre diff aint gonna last long.....I gota hyper one lined up if it melts....and a new hyper mount from mfp on here.... Edited October 21, 2014 by evssv Quote Link to comment Share on other sites More sharing options...
evssv Posted October 21, 2014 Author Share Posted October 21, 2014 better glue the tyres on first ...... ...might help...lol!!...the lipos jus finished charging.. ....and I better wait till me boy gets in from school befeore I run it. .. Quote Link to comment Share on other sites More sharing options...
Tug Posted October 21, 2014 Share Posted October 21, 2014 Not that it really matters, but it's common practice to put the males on the motor and the females on the ESC. Think of it as plugging an appliance into an electrical outlet. Good luck with the test run, I know that feeling of anticipation all too well. Quote Link to comment Share on other sites More sharing options...
evssv Posted October 21, 2014 Author Share Posted October 21, 2014 (edited) Not that it really matters, but it's common practice to put the males on the motor and the females on the ESC. Think of it as plugging an appliance into an electrical outlet. Good luck with the test run, I know that feeling of anticipation all too well.the motor came with sum already fitted so I only had the esc 5 to do......I've spun it up holding the rear off the kitchen table and its a bit noisey but because the spur gear is massive and I only got a 16th pinion. ....the mesh is pretty tight. ....but it worked.....test run time looming as me boy b home soon..I'll get sum vid hopefully Edited October 21, 2014 by evssv 1 Quote Link to comment Share on other sites More sharing options...
mydoddy69 Posted October 21, 2014 Share Posted October 21, 2014 That battery try your using is a losi 8e yes?? (LOSA4461) If so can you give me the dimensions and let me know how you mounted it please fella Quote Link to comment Share on other sites More sharing options...
evssv Posted October 21, 2014 Author Share Posted October 21, 2014 (edited) yes..same as me hyper one. .. length- 168mm width-54mm..if u look in the pic u can see a small nut by the centre diff..inside the tray on the stickey out bit...I drill through and use a small nut/bolt...and theres a tab u can jus make out at the other end of the tray..hope this helps dude..jus uploadin the vid of first run....well I tried to film and drive...not very easy... Edited October 21, 2014 by evssv Quote Link to comment Share on other sites More sharing options...
evssv Posted October 22, 2014 Author Share Posted October 22, 2014 (edited) Not easy to control and film at same time. .lol! ! Old skool Carson lwb touring car brushless: Edited October 22, 2014 by evssv Quote Link to comment Share on other sites More sharing options...
evssv Posted October 22, 2014 Author Share Posted October 22, 2014 i thk i need a bigger pinion as its well slow.......but i cant fit anything bigger then the 16 as i cant move the motor over no more because the spur too big....i got a hyper centre diff and mounts coming from dollor hobbyz and a mount off mfp so i`ll beable to fit a decent size pinny....if the hyper spur is 46th what size pinny shouldi b looking at?considering its a single speed 2wd..150esc 2000kv set up.. Quote Link to comment Share on other sites More sharing options...
shdaxner Posted October 22, 2014 Share Posted October 22, 2014 (edited) I would be looking around 18/19 tooth region with a Hyper 7 centre diff and 46 tooth spur....should be in the region of 50mph or more with that ratio on 4 cell. Edited October 22, 2014 by shdaxner Quote Link to comment Share on other sites More sharing options...
evssv Posted October 22, 2014 Author Share Posted October 22, 2014 I would be looking around 18/19 tooth region with a Hyper 7 centre diff and 46 tooth spur....should be in the region of 50mph or more with that ratio on 4 cell.yeah thats what my hyper runs atm 46/19....I jus managed to squeeze a 16 th pinny on but its no good....I'm gonna fit the new hyper centre diff along with the new mount as mfp has made them with 3mm extra adjustment so bigger pinnys shouldn't b a problem. ...... Quote Link to comment Share on other sites More sharing options...
tingtong333 Posted October 22, 2014 Share Posted October 22, 2014 Nice work Mike! Quote Link to comment Share on other sites More sharing options...
evssv Posted October 22, 2014 Author Share Posted October 22, 2014 (edited) Nice work Mike!cheers dude.....need to get it up to speed....should fly on 6s once I redo the centre diff....that esc i had off u works sweet btw....its in this. Edited October 22, 2014 by evssv Quote Link to comment Share on other sites More sharing options...
tingtong333 Posted October 22, 2014 Share Posted October 22, 2014 The old Focus car park in Avonmouth is ideal to run that. Quote Link to comment Share on other sites More sharing options...
evssv Posted October 22, 2014 Author Share Posted October 22, 2014 The old Focus car park in Avonmouth is ideal to run that.cool......I'll try it once its all sorted Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.