shdaxner

Sorry folks, everything is now sold. Thanks!!

Badlands sold. car and pinions left.

Tools sold

Sorry Nomsicle, batteries now sold.

Tamiya paint sold

Not yet, tools still available. yep still available mate , drop me a PM please and I’ll get back to you with a price.

No not belted mate, I bought them pre-glued. Honestly, I have never had issues running the same wheels and tyres on previous truggy's at 5 and 6s. Thanks.

Now updated with photos. Thanks.

Strange, will take a look now.

Anybody else having issues with the photos? @capri-boy roller - £180?

Evening All, Selling up as I just don't have the time for the hobby like I thought I would do. Hobao Hyper SSE 1/8 truggy RTR - SOLD Only used twice since being built, both times on grass only never having seen a jump, truck is really quiet quick - may also sell as roller if enough interest. Spec - Hyper SSE. Razer 2200kv brushless motor. Razer 150a 3s to 6s waterproof ESC with XT90 connectors. Annimos DS3225mg 25kg waterproof steering servo. Flysky FS-GT3C transmitter with Flysky receiver. Will come with standard Hyper wheels and tyres - poor attempt at gluing them meant that they have been used for about 15 seconds before coming unglued, will need re-gluing. Shell is painted, taped and shoe goo'd so super strong - not a perfect paint job but perfect for bashing. Rear wing is snapped from when the car rolled, only a few quid to replace or can be repaired. 1 million wt diff oil in the centre diff. Connectors and spare diff oil will come with. **Does not come with Proline Badlands** Proline Badland 3.8 tyres on Desperado wheels 17mm hex - SOLD Used twice on grass only. Best wheels and tyres around IMO. Turnigy T-240 Reaktor AC/DC charger - SOLD Good little charger with 2 channels so can charge 2 batteries independently. Link to charger - Link to full spec here. 2 x Rhino 4s 5000mah 50c lipos - SOLD Cycled twice only, left in storage charge when not in use. No puffing or damage to the batteries. XT90 connectors currently fit. Tamiya PS1 white polycarbonate paint - SOLD New and unopened. Pinion gears - SOLD All mod 1 Tamiya 14t RW 16t RW 17t Tools - individual prices below, or all together - SOLD Body reamer Team C 17mm hex wrench Turnigy hex drivers and turnbuckle wrench (1.5mm, 2mm, 2.5mm and 3mm) Turnigy 7 in 1 multi driver All prices do not include PayPal fees but do include postage (except for truggy due to size, will need to look into this if interest) cash on collection is preferred but can post if required, collection from Bradford West Yorkshire and willing to knock postage off the price. Can get more photos if needed, any questions just ask, also willing to do deals on multiple items if bought together. Thanks.

I have a Hyper SSTE which I may part with? Almost brand new, ran for only about 20 seconds on my street, no scratches or anything to the chassis or (unpainted) shell. Comes with almost brand new Proline Badlands, again only used for around 20 seconds. It is RTR with a 2200kv motor and 150a ESC all brand new when fitted. Cheers.

I ran my Hyper ST pro on 5s a few years ago, was an absolute beast and I loved that thing....super strong basher but the big sticking point for me was the utterly rubbish shocks, I ended up modifying mine to fit twin shocks, this was much better - otherwise just get used to the truck slapping the ground on every landing. Not sure if you can even get the bits and bats to do a decent conversion these days? Losi battery tray, Mugen MBX6T side guards, the CNC'd motor mount which somebody on here used to knock up, Proline Bulldog shell

Well here I am, back in the game! After completely selling up 4 years ago an old friend messaged me last week asking if I was interested in a truggy they were selling, after some negotiating we agreed on a ridiculously cheap price which I could not really refuse, as a result I am now the owner of a brand new and never used Hobao Hyper SSE truggy. So, what has changed in the last 4 years? I see Arrma are now the "top dogs" when it comes to bashers, what happened to Hobao? forum seems quieter in general?

Whats best you will take for the DBX 2.0 posted please?

Both the Kyosho's still available mate? looking on behalf of a friend.

Drop us a PM with what your interested in please Dave....just weighing my options up.

Got rid of all my cars so all my bits and bats which are no longer needed gotta go too. Ideally it has to go as a job lot as I just want rid - list of bits and photos as follows (can get better pics of bits if required) Collection from Bradford only currently and looking for around £150??? collected - will also be listed on eBay over the next couple of days. Loads of various shaped plastic servo horns 2 alloy servo horns Set of Proline Secure-Loc body mounts Load of bearings - some used but still in good condition, some new. Maverick ESC/RX unit taken from Maverick Ion MT 2 x Etronix power caps 2 x Hobbyking BEC Load of various sized shock spacers Loads of various sized body clips Couple of body washers Some HPI body mount washers 10th and 8th size 17 x various sized pinion gears 2 x hardened 17mm hex's from a Hyper ST pro 3 x 17mm wheel nuts Load of randon connectors, some used some not used, some still with wire connected so need de-soldering 11 Hobbyking battery charge indicators 10th scale motor heatsink Set of 12-17mm Integy axle extenders 10 springs - all from Traxxas Emaxx shocks Bit of fuel line Lipo alarm 3 x velcro battery straps Some aerial tube, end caps and screw down thingy ma jigs Various bind plugs. Shed load of EC3 connectors never used Used unknown fuel tank Used unknown side guards 5 x motors - all used and not sure if they work as never tried them Hyper 9E spares - shock tower, centre shaft, dog bones, lower arms, centre diff coupling plus others. 4 x unused Proline 12mm aluminium hexes RPM front and rear hub carriers for Traxxas Stampede 4x4 Proline body post spares 2 x glowplug/cross wrenches EDS 17mm wheel nut wrench 1 x 3 way turnbuckle wrench 3 x mini 4 cross wrenches Loads of turnbuckle spanners Body reamer Turnigy long shaft hex driver set 3 sets of Turnigy 4 in 1 hex driver sets EDS hex driver set IR temp gun Fastrax bits but no handle Turnigy tool bag Shock/diff oils as follows - approx qty detailled After fun oil - full Airfilter oil - full 12.5k wt diff oil - 3/4 50ml bottle 30k wt diff oil - full 50ml bottle 500k wt diff oil - full 50ml bottle 3k wt diff oil - nearly full 50ml bottle 8k wt diff oil - 3/4 50ml bottle 5k wt diff oil - full (small Proline bottle) 45wt shock oil - 2/3 (Proline bottle) 60wt shock oil - 2/3 59ml bottle 50wt shock oil - 3/4 59ml bottle Tamiya shock oils as follows Red - soft - 2/3 Yellow - soft - ful Clear - hard - ful Pink - hard - 3/4 Blue - medium - 1/6 Green - medium - nearly empty Orange - soft - 2/3 Blue - hard - 9/10 Yellow - soft - 1/2 Purple - medium - 3/4 Yellow - soft - full Clear - hard - full Yellow - soft - full Clear - hard - full Small clear - hard - 3/4 Small yellow - soft - 8/10 Maverick Ion MT with MT and SC bodyshells, upgraded Trackstar brushless motor and ESC which work as should - comes as seen Also have a HImoto 10th scale SCT which has a bent front shock tower and needs repairing - along with the Maverick transmitter and Himoto transmitter.

I have a charging cable going spare mate. Oh and in response to the PM...I did have one for sale but i have looked this afternoon and I cannot seem to find it...Sorry!!

PMT and lipos now sold.

Next part of my clear out folks. All prices include postage and PayPal fees, if you want to make an offer please do so via PM to keep the thread clean. Proline Pro MT roller - £100.00 Used PMT which has some scratching to the underside but still in really good condition, all plastics are still fine also. The body shell is scuffed with some small splits but it was gooed and taped prior to use so still solid as a rock with loads of life left. Wheels are tyres are still in really good condition. Comes with a spare spur gear and set of slipper pads. Can either be supplied in parts in original box or built up as it is in a larger box but no original box included. Also fitted with Traxxas waterproof receiver box. Truck is still a little dusty from last use. 8 x 2s lipos - £40.00 Lipos stored at storage charge and all worked perfectly well last time I used them around 2 months ago, 6 of them fitted with 5.5mm bullets the other 2 are fitted with XT60's 2 x Blackmagic 6000mah 30c 3 x Zippy 4000mah 30c 3 x Zippy 5000mah 20c Turnigy 16th scale SCT roller - £20.00 Rolling chassis in really good condition, has a different set of shocks on the front to the rear but both sets work fine, comes with some spares as pictured. Has a servo fitted but not sure if it works, there is some tape residue inside the battery compartment but will come off if cleaned. Pinion gears in various sizes - £30.00 Various sized pinion gears. Got 19t, 20t, 21t, and 22t 48dp 3mm shaft all hardly used if not new. 12t, 15t, 17t and 18t MOD1 5mm shaft About 8 more pinnys which I am unsure of pitch and size.

Yep I think themes would be a good idea....if possible. Again, I really like the new look....I put that down primarily to the fact I am young and find fresh and minimalist much prettier

I have a WP SC8 and 4 pole 4000kv at home to sell if interested?

I think the new update looks much better....cleaner and prettier by far. No problems to report thus far other than ones already stated

Well I have had my little 125cc starter bike for a week now.....put around 160 miles on it and I am really enjoying it....although I now want something bigger!! Sent from my iPad using Tapatalk