Oh How Original Posted July 4, 2014 Share Posted July 4, 2014 If i could find a roller or a kit i'd have one tomorrow but im just not willing to fork out on there crap electrics to just remove them and bin 'em Exactly, and sending them back to Losi only really makes them look at improving the next model, you still only get a replacement which nobody would buy and you're still stuck with the full bill for the thing plus the electrics. I'd be half tempted to buy one straight away as well if it came as a roller, the one thing my Mini 8ight buggy lacked was ground clearance so this could be the ticket. IF they release a roller or kit. Quote Link to comment Share on other sites More sharing options...
silone74 Posted July 5, 2014 Share Posted July 5, 2014 No mods for this 4 pole motor fitting in the m8t, some 28mm cans are not quite 28mm thats why I asked for the verniers measurements for the traxxas motor. http://www.rctech.net/forum/micro-mini-scales/810662-losi-mini-8ight-t-38.html Quote Link to comment Share on other sites More sharing options...
ninjagaiden Posted July 5, 2014 Author Share Posted July 5, 2014 No mods for this 4 pole motor fitting in the m8t, some 28mm cans are not quite 28mm thats why I asked for the verniers measurements for the traxxas motor.http://www.rctech.net/forum/micro-mini-scales/810662-losi-mini-8ight-t-38.html Yes. I had that motor on my list. The thing I would say about that one is that the lower kv means you'd need a slightly larger pinion, and there isn't a lot of room for lateral movement of the motor in the mount, so to gear this nicely you'd likely need to swap out the stock spur gear too. However, you could run the XK2858 on 3S and make your AViCii work hard! Quote Link to comment Share on other sites More sharing options...
silone74 Posted July 5, 2014 Share Posted July 5, 2014 If the lc racing motor or leopard 2838 have the same diameter that need no mods to fit then I would choose one of those, both 4 pole the lc is 4500kv the leopard 5200kv I have both motors one in my emb and the other in my sons emb, I really need to measure them to get a better example if they will fit. I will still wait for a used one but worth knowing if these fit before purchase Quote Link to comment Share on other sites More sharing options...
mydoddy69 Posted July 5, 2014 Share Posted July 5, 2014 If the lc racing motor or leopard 2838 have the same diameter that need no mods to fit then I would choose one of those, both 4 pole the lc is 4500kv the leopard 5200kv I have both motors one in my emb and the other in my sons emb, I really need to measure them to get a better example if they will fit. I will still wait for a used one but worth knowing if these fit before purchase I intend to get a roller and have the chassis milled slightly and run the emb , might just see if I can squeeze it now thou after reading this ? Quote Link to comment Share on other sites More sharing options...
silone74 Posted July 5, 2014 Share Posted July 5, 2014 I will try get them measured tomorrow because I want to compare the exact diameter I think they would be the perfect choice for the m8t. Quote Link to comment Share on other sites More sharing options...
Oh How Original Posted July 6, 2014 Share Posted July 6, 2014 Do you have to cut out an actual hole from the chassis? Or is it just a bit of a groove? Just wondering what difference it will make to the strength of it, I mean they aren't exactly thick to begin with. Shame Losi cheaped out on this really, because it looks great on the surface but would appear to be a bit of a fail in reality :/ Quote Link to comment Share on other sites More sharing options...
mydoddy69 Posted July 6, 2014 Share Posted July 6, 2014 Do you have to cut out an actual hole from the chassis? Or is it just a bit of a groove? Just wondering what difference it will make to the strength of it, I mean they aren't exactly thick to begin with. Shame Losi cheaped out on this really, because it looks great on the surface but would appear to be a bit of a fail in reality :/ It's just a 1 mm thick grove that needs removing just like on the buggy so you can gain a proper mesh when using a larger can. As for strength I don't see it making any complications as traxxas chassis are plastic and look at the abuse they can take..So a 1mm groove or a section milled will make no difference to a truck weighing in under 3 lb. Once I get mine and get it sorted I'll post up some pics and give it a good sound thrashing just to make sure all is well.. Won't be for a while thou Quote Link to comment Share on other sites More sharing options...
mydoddy69 Posted July 6, 2014 Share Posted July 6, 2014 Can someone tell me what size is the stock spur gear on the 8t ? Thanks Quote Link to comment Share on other sites More sharing options...
Oh How Original Posted July 6, 2014 Share Posted July 6, 2014 Ahh fair play if it's just a small groove needing cut out then, easily done with the Dremel, doesn't need to be majorly neat or perfect, you won't see it under the motor lol. Think I'll still hold off until a nice second hander pops up or IF they take on what people are saying and offer it as a roller or even kit. Quote Link to comment Share on other sites More sharing options...
ninjagaiden Posted July 6, 2014 Author Share Posted July 6, 2014 Stock gearing is 14T/62T on the M8T. You need to remove material from the area under the motor, which I did carefully with sandpaper as the dremel was a bit vicious. Here are some pictures next to my EMB-1 which I have had fun building whilst watch Le Tour de Yorkshire! Top view. Sorry about messy wiring! When you look at these side by side, it is INSANE that the LC comes with a decent 28mm can, and the M8T comes with a 24mm can!!! 1 Quote Link to comment Share on other sites More sharing options...
silone74 Posted July 6, 2014 Share Posted July 6, 2014 There's talk on other forums about having to shim the diffs as there is play, have you noticed this on yours? Quote Link to comment Share on other sites More sharing options...
ninjagaiden Posted July 6, 2014 Author Share Posted July 6, 2014 No the diffs are okay on mine. Quote Link to comment Share on other sites More sharing options...
silone74 Posted July 6, 2014 Share Posted July 6, 2014 Right I am going to go out on a limb now I recon the leopard 2838 will fit with no mods, I have just measured it with verniers and it measures 27.62mm, not had chance to do the lc racing motor but the leopard is a cracking motor in my emb Si Quote Link to comment Share on other sites More sharing options...
Deafty Posted July 6, 2014 Share Posted July 6, 2014 Hi. nice comparison can u do 1 comparing width too pls.? +++++ ok,.. Q time if u don't mind. Is the wheel base around 235mm or longer? Also; do u know the wheel offset? and track width? Quote Link to comment Share on other sites More sharing options...
mydoddy69 Posted July 6, 2014 Share Posted July 6, 2014 Right I am going to go out on a limb now I recon the leopard 2838 will fit with no mods, I have just measured it with verniers and it measures 27.62mm, not had chance to do the lc racing motor but the leopard is a cracking motor in my emb Si Isn't that lepoard motor a 2 pole thou ?. Be very interesting to find the measurement of the emb motor ? So come on get cracking !! Quote Link to comment Share on other sites More sharing options...
.AJ. Posted July 6, 2014 Share Posted July 6, 2014 Gimme 15mins and I'll measure one of my EMB motors Quote Link to comment Share on other sites More sharing options...
.AJ. Posted July 6, 2014 Share Posted July 6, 2014 Bang on 28mm Quote Link to comment Share on other sites More sharing options...
silone74 Posted July 6, 2014 Share Posted July 6, 2014 (edited) No the leopard is 4 pole 5200kv Edited July 6, 2014 by silone74 Quote Link to comment Share on other sites More sharing options...
mydoddy69 Posted July 7, 2014 Share Posted July 7, 2014 No the leopard is 4 pole 5200kv That's good then. Have you got a link to one please ? And do they come in any lower kv ? Quote Link to comment Share on other sites More sharing options...
hebby Posted July 7, 2014 Share Posted July 7, 2014 This motor no good? http://www.modelsport.co.uk/hobbywing-quicrun-2435-4500kv-bl-motor-1-18-1-16/rc-car-products/385021 Quote Link to comment Share on other sites More sharing options...
mydoddy69 Posted July 7, 2014 Share Posted July 7, 2014 This motor no good? http://www.modelsport.co.uk/hobbywing-quicrun-2435-4500kv-bl-motor-1-18-1-16/rc-car-products/385021 Nah it's only a 2 pole so it will be worse than the stock one Quote Link to comment Share on other sites More sharing options...
hebby Posted July 7, 2014 Share Posted July 7, 2014 (edited) Ahh didn't see that it was 2 pole FFS! Just purchased a velineon 380 for Edited July 7, 2014 by hebby Quote Link to comment Share on other sites More sharing options...
hebby Posted July 7, 2014 Share Posted July 7, 2014 Wouldn't it have been easier for Losi to have made a motor mount that slides in at an angle so that a larger motor fitted moves away from the chassis rather than staying level with it? Quote Link to comment Share on other sites More sharing options...
mydoddy69 Posted July 7, 2014 Share Posted July 7, 2014 Has yours arrived yet fella ? I'm not going to use the velineon I'm going to have a go with the emb motor first and a 60a quicrun esc .. Might get a spare chassis and have a go at grinding it down with a dremel stone I that comes out crap I'll get it milled .. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.