Alex97 Posted March 27, 2015 Share Posted March 27, 2015 Fitted JR connector to a capacitor in the attempt to make a RX capacitor, would it just be plug and play? Quote Link to comment Share on other sites More sharing options...
Noj Posted March 27, 2015 Share Posted March 27, 2015 Ragged, jumped and rolled The Beast, added a fresh split to the shell, hoovered up grass, left some 11's came home with a wobbly rear wheel and reminded myself why I love this hobby 2 Quote Link to comment Share on other sites More sharing options...
chewbacca Posted March 27, 2015 Share Posted March 27, 2015 Raided the Vandal for parts to fix Chevy Carnage. Got very annoyed with some rounded hexes until I figured that the part was broken anyway so I hacked away at it until I could grip the heads with a mole wrench! It took a while but CC rolls again Quote Link to comment Share on other sites More sharing options...
Tug Posted March 27, 2015 Share Posted March 27, 2015 Ally servo saver fitted to Savvy. Red threadlock applied to Hot Racing hex adaptors. Hole drilled in motor shaft to allow grub screw to sit deeper into pinion, red threadlock applied to grub screw, here's hoping it'll stay put now. Quote Link to comment Share on other sites More sharing options...
Oh How Original Posted March 27, 2015 Share Posted March 27, 2015 Put a new spur gear holder on the Baja, then for reasons I'll never understand, decided to take the diff out and rebuild it. Much needed job, oil had gone like water, grease was disgusting and two bearings were shot. Running so smooth and true now, job well done! Quote Link to comment Share on other sites More sharing options...
Garry45 Posted March 27, 2015 Share Posted March 27, 2015 (edited) Fitted a set of Silverback RC rims and beadlocks to my KM truck as kept breaking the stock ones Edited March 27, 2015 by Garry45 Quote Link to comment Share on other sites More sharing options...
flatout! Posted March 27, 2015 Share Posted March 27, 2015 https://www.dropbox.com/sc/1375pkencw5slcp/AABs2ScfMUTzkBURE-_ALdFsa https://www.dropbox.com/sc/n0mfjtwtw2k6ezj/AAA4sXS_glGqkCUKrCSzflAYa https://www.dropbox.com/sc/v74rvhndq3l7f3f/AAAgp2E8E6TcHrzY5mWVHXbia https://www.dropbox.com/sc/yml4fsqz3prtq15/AADM0KVgzo_9eC4rPdCdu2dWa https://www.dropbox.com/sc/j7e5oappqjl0z49/AABaydn1x-qJceuC3R6oRmIna https://www.dropbox.com/sc/m9hbbydvwevgd37/AADVxtNl7UOLWtgWGmwKhLsua https://www.dropbox.com/sc/j4v5sovm85hba2m/AABGHQN2MK7n23DqXUvmJJgOa over the last week iv done a few things, a replacement with the rear alloy hubs, i kept snapping the standard km plastic hubs, snapped a tooth off the 20 tooth drive gear from in the gearbox, and bluw a hole in the gearbox casing, today out minding my own business my baja jumped about 10 ft in the air off a jump and it went about 25 ft in distance lol! Awesome jump, but it lawn darted and snapped the bottom arm, iv been looking for kraken bottom suspension arms but no where has them, id appreciate a link to some if anyone knows were there is some? I said I wouldn't jump my baja but wow its awesome, iv built a new track up local again its not massively big but its getting me practice in for when im ready for going racing, im just about putting it were i want, its coming together now, loads of power and smooth driving loving it and my baja's taking just about everything iv thrown at it, apart from darting from about 10ft, scale that up and its like driving your real car off a cliff lol! No wounder they brake lol! Quote Link to comment Share on other sites More sharing options...
peterthedrummer Posted March 28, 2015 Share Posted March 28, 2015 https://www.dropbox.com/sc/1375pkencw5slcp/AABs2ScfMUTzkBURE-_ALdFsahttps://www.dropbox.com/sc/n0mfjtwtw2k6ezj/AAA4sXS_glGqkCUKrCSzflAYahttps://www.dropbox.com/sc/v74rvhndq3l7f3f/AAAgp2E8E6TcHrzY5mWVHXbiahttps://www.dropbox.com/sc/yml4fsqz3prtq15/AADM0KVgzo_9eC4rPdCdu2dWahttps://www.dropbox.com/sc/j7e5oappqjl0z49/AABaydn1x-qJceuC3R6oRmInahttps://www.dropbox.com/sc/m9hbbydvwevgd37/AADVxtNl7UOLWtgWGmwKhLsuahttps://www.dropbox.com/sc/j4v5sovm85hba2m/AABGHQN2MK7n23DqXUvmJJgOa over the last week iv done a few things, a replacement with the rear alloy hubs, i kept snapping the standard km plastic hubs, snapped a tooth off the 20 tooth drive gear from in the gearbox, and bluw a hole in the gearbox casing, today out minding my own business my baja jumped about 10 ft in the air off a jump and it went about 25 ft in distance lol! Awesome jump, but it lawn darted and snapped the bottom arm, iv been looking for kraken bottom suspension arms but no where has them, id appreciate a link to some if anyone knows were there is some? I said I wouldn't jump my baja but wow its awesome, iv built a new track up local again its not massively big but its getting me practice in for when im ready for going racing, im just about putting it were i want, its coming together now, loads of power and smooth driving loving it and my baja's taking just about everything iv thrown at it, apart from darting from about 10ft, scale that up and its like driving your real car off a cliff lol! No wounder they brake lol! If you live in America go here http://www.davesmotors.com/kraken-rc-x2-rear-lower-a-arms-for-hpi-baja-5b-5t-5sc.html Or for UK go herehttp://abbotsrc.co.uk/Kraken-RC-Set-of-2-Lower-Front-A-Arms-Black-P2996582.aspx 1 Quote Link to comment Share on other sites More sharing options...
flatout! Posted March 28, 2015 Share Posted March 28, 2015 Thanks mate, Quote Link to comment Share on other sites More sharing options...
VIRUS PAUL Posted March 28, 2015 Share Posted March 28, 2015 Postman just brought new DDM pipe for Maverick Blackout , will have to find time to get that on today !!!!!!! 1 Quote Link to comment Share on other sites More sharing options...
flatout! Posted March 28, 2015 Share Posted March 28, 2015 Fitted a set of Silverback RC rims and beadlocks to my KM truck as kept breaking the stock ones engine mount bolt is un done, just behind the pull start Quote Link to comment Share on other sites More sharing options...
Garry45 Posted March 28, 2015 Share Posted March 28, 2015 Good spot mate and I only found it when I took the picture and tightened it back up so all good Quote Link to comment Share on other sites More sharing options...
flatout! Posted March 28, 2015 Share Posted March 28, 2015 Nice, I just take a hour or two out just to check bolts, and locktite that bolt its a bugger its always coming undone if you don't locktite it, Quote Link to comment Share on other sites More sharing options...
VIRUS PAUL Posted March 28, 2015 Share Posted March 28, 2015 All this just to fit a new exhaust !!!!!!!!! All back together . Worth it in the end looks and sounds mean . 1 Quote Link to comment Share on other sites More sharing options...
.AJ. Posted March 28, 2015 Share Posted March 28, 2015 Got the new Zen G320 run in Now I've gotta clean her Quote Link to comment Share on other sites More sharing options...
Noj Posted March 28, 2015 Share Posted March 28, 2015 Inspected the wobbly rear Beast wheel, another snapped bolt in the v1 uber extenders. Looked at other sources of rear, 8mm extenders Quote Link to comment Share on other sites More sharing options...
everclear1984 Posted March 28, 2015 Share Posted March 28, 2015 Got it wet.... then remembered it's not waterproof! I was hoping to see how well the balloon waterproofing on the rx faired but as soon as I got there I had to rip it off due to issues with binding the tx. It got wet and sure enough stopped working. Fortunately I have some cans of compressed air around and once I dried it out it started working again Compressed air saves the day! Quote Link to comment Share on other sites More sharing options...
Tug Posted March 28, 2015 Share Posted March 28, 2015 Spanked the Savvy, shot some footage, but it's not good, so it'll need trimming before uploading. Quote Link to comment Share on other sites More sharing options...
Hyper-d Posted March 28, 2015 Share Posted March 28, 2015 All this just to fit a new exhaust !!!!!!!!! All back together . Worth it in the end looks and sounds mean . Very nice Tempted to buy one for mine. Where'd you buy from? Quote Link to comment Share on other sites More sharing options...
Garf Posted March 28, 2015 Share Posted March 28, 2015 Made a DIY pre-preg carbon fin for my cfx; Lived long and prospered 1 Quote Link to comment Share on other sites More sharing options...
turok007 Posted March 28, 2015 Share Posted March 28, 2015 built another backslash with TEKIN RX8 combo Quote Link to comment Share on other sites More sharing options...
VIRUS PAUL Posted March 28, 2015 Share Posted March 28, 2015 Very nice Tempted to buy one for mine. Where'd you buy from? Bought from FREEPRAWN , bit of work to fit as you have turn the tank round the opposite way and dogbones go through it , so that means all the back end has to come off , but I think it's worth it ? Quote Link to comment Share on other sites More sharing options...
Geeze Posted March 28, 2015 Share Posted March 28, 2015 Fixed the bent link on the honcho and fitted new tough armour sliders. Sliders fell into the basket when ordering the link parts. Well, you have to undo one of the slider bolts to get the link off so seemed fair! Now realised can't fit my slider battery trays About time I got around to making v2 so can't see them below the body anyway. Now got no excuse not to get on with it Quote Link to comment Share on other sites More sharing options...
.AJ. Posted March 29, 2015 Share Posted March 29, 2015 (edited) Giving the DBXL a good service/clean Edited March 29, 2015 by .AJ. Quote Link to comment Share on other sites More sharing options...
Philxj4L Posted March 29, 2015 Share Posted March 29, 2015 Stuck a GoPro mount on. The full kit. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.