Leaderboard
Popular Content
Showing content with the highest reputation on 28/01/13 in all areas
-
Got to say, I'm with the OP. There's always a few that ruin it for everyone else. Regardless of what you're wearing, it comes down to attitude & respect towards others. Hope it all works out okay for you mate! If that's not living up to the previously mentioned stereotype, then I don't know what is! lol Chillax5 points
-
4 points
-
well i woke up this morning thinking my new hpi wr8 ken block roller would be here, thinking i had got away with customs but no such luck (4 points
-
have to agree with Barry its a public place and sounds like they where having fun...........also i bash with a load of fellas who wear trakkies lol sounds like a bit of snobbery to me like!4 points
-
3 points
-
"I would consider splitting if I get enough interest, but if I split...I will be keeping both the shell and the wheels for another project." so if you want the wheels, the price would be3 points
-
Bez in action http://www.youtube.com/watch?v=87tDD-V6cb0&list=UUwyThBfJexxkpQEbBQJoK7A&index=13 points
-
I don't adocate violence, I'd rather talk. But when some one who's 6 inches taller than me & a foot wider tries to smash up/ steal my stuff, I react , sorry if some disagree. But I was bought up not steal of trash other peoples stuff2 points
-
appreciate the kind comments, Hopefully it will be up and running within 2 weeks, I'll post up a video once the running in is out the way2 points
-
2 points
-
2 points
-
well after all that speech about getting away with customs as it did not say 'awaiting customs' on the tracking, i was expecting to wake up this morning with my new wr8 delivered but instead there was a bill for2 points
-
Always next time mate, we are planning to get back on track and bash like we did back in 2010/11, so plenty of bashes yet to come2 points
-
2 points
-
Was a good day guys and no major damage to the 8ight or the hyper, just the battery box2 points
-
2 points
-
7.4v is a 2s carl . You can run some brushed esc on a 2s but best check the.make first1 point
-
all this battery talk has got my head in bits i will never go lipo o r bloody zippy i might go bungle tho lol1 point
-
Double 2x 2s bobby that's what I do with the trophy :-) Oh and nice one bobby got me looking what rc cars and rc stuff I can sell to buy me a wr8 now cheers mate as if I didn't have enough cars already :-/1 point
-
hmmmm i wonder what i could fit onto this lol http://www.ebay.co.uk/itm/R-C-Tamiya-Traxxas-wedico-Bruder-Scrolling-red-Led-name-warning-board-Brand-new-/170980488267?pt=UK_ToysGames_RadioControlled_JN&hash=item27cf3b344b1 point
-
1 point
-
1 point
-
1 point
-
thats why i bought these gravel tyres for 3 sisters should be ok for 3 sisters, checking out the youtube reviews it looks very capable offroad and with the 2700kv motor instead of the 4000kv and a 120amp esc it will take 4s instead of just 3, allthough i only have a 3s battery for it at the moment.1 point
-
1 point
-
He started it up today and i thought it didnt quite sound right? Thanks1 point
-
i went back to the stock plastic ive got a spare one if you wont it 4 free1 point
-
Ah, but I love drifting lol I'd never get rid of my nitro, but for the bargainous of1 point
-
looks very nice bobby, can't wait to see how fast you can get this on the car park1 point
-
1 point
-
1 point
-
Well im up for something tomorrow night. Ruslip is not far at all, just a lil drive past north Harrow and im there.1 point
-
Overrating lipos is perfectly fine, the motor only draws the amps it requires1 point
-
1 point
-
1 point
-
As much as I like my idea, its not for everyone and gonna be more expensive, however I aggre with the above quote in full, sound advice there, not a plank flyer my self (yet) but have seen the. Bixler reviews, looks good and can even be made into a semi OK FPV setup if you want to at a later date.1 point
-
i will take the batteries if the buyer doesn't pay1 point
-
1 point
-
Bill, keep them in like a meal box. Money safes work well. The little ones with the key lock1 point
-
it was basically be impossble to reach 100mph in madrat as the gears would not handle the power and with all the power going to the rear it would just spin out most of the speed buggys are 4wd1 point
-
1 point
-
That's just round the corner from me, I didn't know it had ever existed, shame it doesn't anymore. You can still see the outline of the track, i wonder if there's much left. Maybe it's worth a look, though perhaps it's been demolished completely. Does anyone know who owns the land? Perhaps it's worth trying to revive it? Not sure how you'd go about that but it would be nice to have a track within a few miles of home. Might have to try the BMX track at Iford, thanks for mentioning that Reggy, never crossed my mind. Is it ok to use it though, will the BMX club moan for instance?1 point
-
Had a good day, nice to have an RC that shifts and i can abuse if I want to! Think I'll be getting some diff oil tho. Also nice to meet some new people. Roll on summer time so we can get the BBQ out again1 point
-
i think you will find he is probably one of the most respected rc reviewers. he takes a lot of critiscm accused of being sponsered etc etc and actually all he does is perform in depth reviews, with video evidence of everything and give his opinion. it sounds to me like you have a personnal issue with him as you don't like his reviews and surely your being hypocritical as you have decided his opinion is wrong because yours is different1 point
-
sounds like you have it all planned out lol for wheels and beadlocks it has to be silverback rc, they are by far the best on the market and cheap http://silverbackrcproducts.com/1 point
-
it does look great though buddy, i spoke to nigel for you (because i am awesome lol) his supplier is due the system early next week he is expecting you to receive it next week =]1 point
-
This set IS killswitch compatible and works very well so no need to rethink. Ive used mine for over 3 years with a killer bee kill switch with no issues and it does everything it should do and this is speaking from experience and not assumptions or heresay.1 point
-
servo can fit on right but won't be able to roll with truggy shell as servo horn exceeds shell so will remain on left side for time being back to left side (gonna fab up servo stay post/block) rx mounted servo lead to be shortened1 point
-
Too use MG servo has to be mounted on top plate due to truggy shell, going to order other configurations of bell crank as rather servo on right so no limit on battery choice. Done a test build with hitec as smaller slight rubbing on shell from servo horn nothing major, shall visit hardware shop for drill bit need motor in now lol1 point
-
1 point
-
Member Statistics