53HRA Posted May 6, 2021 Share Posted May 6, 2021 Features: 1/10 scale R/C touring car assembly chassis kit. Features Stepped-V shaped main chassis which balances weight and rigidity. The battery pack and servo are positioned on a slight angle (about 10 degrees) to reduce surface contact while cornering and facilitate optimum weight distribution. Spur gear is positioned in front of motor which produces stable drivability. 2 belt-driven 4WD uses TRF420 oil-filled gear differentials and steel TA07 differential joint cups. A-arm suspension arm gives your model a low center of gravity, enhanced with laid down dampers. Camber and caster angles are adjustable by turnbuckle shafts and lower arm spacers respectively. Comes with Super Short Big Bore size shock dampers. Universal drive shafts and full bearings included. Rotating body mounts by 180 degrees switches between standard and 2mm advanced body positions. This feature allows the user to change the balance of the car with any selected body. Requires: 2-channel radio, short steering servo, ESC, motor, 190mm touring car body set, tires, 7.2-7.4 volt battery pack & compatible charger Source: RCcaraction 🙂 View full news article Quote Link to comment Share on other sites More sharing options...
PraetoR Posted May 6, 2021 Share Posted May 6, 2021 I don't need another touring car. I don't need another touring car. I don't need another touring car. I don't need another touring car. 2 Quote Link to comment Share on other sites More sharing options...
danb1974 Posted May 7, 2021 Share Posted May 7, 2021 Did not finish the morning coffee, but do I see a deans to tamiya adapter in an official tamiya photo...? Maybe after the tamiya melts, you can solder the deans directly 1 Quote Link to comment Share on other sites More sharing options...
walkbythesea Posted May 7, 2021 Share Posted May 7, 2021 17 hours ago, PraetoR said: I don't need another touring car. I don't need another touring car. I don't need another touring car. I don't need another touring car. Yeah you do 3 Quote Link to comment Share on other sites More sharing options...
PraetoR Posted May 7, 2021 Share Posted May 7, 2021 1 hour ago, walkbythesea said: Yeah you do You know, I hadn't considered that... 2 Quote Link to comment Share on other sites More sharing options...
TWINSET Posted May 7, 2021 Share Posted May 7, 2021 15 hours ago, danb1974 said: ... but do I see a deans to tamiya adapter in an official tamiya photo...? Maybe after the tamiya melts, you can solder the deans directly On a LiFe battery - Only Tamiya would use two connectors to connect their own battery to their own car 😆 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.