Tone rc Posted March 16, 2021 Share Posted March 16, 2021 Does anybody have or know about the cen fun factors, I have steering issues with mine, I swapped the servo and still have the same problem, any suggestions, thanks. Quote Link to comment Share on other sites More sharing options...
Gaz! Posted March 16, 2021 Share Posted March 16, 2021 Hi and welcome to the forum. ive moved your thread into the general Rc section as opposed to the sales section. Cheers Quote Link to comment Share on other sites More sharing options...
Tone rc Posted March 16, 2021 Author Share Posted March 16, 2021 Thanks Quote Link to comment Share on other sites More sharing options...
Hell horn. Posted March 18, 2021 Share Posted March 18, 2021 What's the problem you a are having with it. Let us know the details and pics if car. And we will see what we can do Quote Link to comment Share on other sites More sharing options...
Tone rc Posted March 19, 2021 Author Share Posted March 19, 2021 Steering issue, I had a small crash with it, run for a while after went to fire later for a garden run and no steering, well just very slight movement left and right, I swapped the servo but the same problem happens. ita a cen fun factor 4wd rally, nt16 engine, can post pics later if need be, thanks for your time, appreciated Quote Link to comment Share on other sites More sharing options...
Stormbringer Posted March 19, 2021 Share Posted March 19, 2021 is there a steering rate dial on your transmitter ? if there is make sure it hasnt been turned down Quote Link to comment Share on other sites More sharing options...
J.K Posted March 19, 2021 Share Posted March 19, 2021 If you crashed it, have you checked the car all over? Have you checked all the steering components and linkages for bends and breakages? Quote Link to comment Share on other sites More sharing options...
Tone rc Posted March 19, 2021 Author Share Posted March 19, 2021 Turned these both ways and it made no difference Quote Link to comment Share on other sites More sharing options...
Tone rc Posted March 19, 2021 Author Share Posted March 19, 2021 Did check all over had a bent rod which got replaced, but still the same, it needs a new shock as this returns very slowly but seems fine everywhere else Quote Link to comment Share on other sites More sharing options...
Hell horn. Posted March 21, 2021 Share Posted March 21, 2021 Take horn off servo. Can you activate steering both ways. Is it smooth. Any binding. Try it with the suspension compressed. If no issues. Then check all the settings. Try a different transmitter if you have one. Quote Link to comment Share on other sites More sharing options...
Tone rc Posted March 22, 2021 Author Share Posted March 22, 2021 I took it off and it turned good, still I changed it and still the same problem, binding?. I need to get a replacement suspension for one wheel as its stiff and don't like returning, I can't see any rubbing or blocked to stop it operating like it should. Quote Link to comment Share on other sites More sharing options...
Jumper Posted March 23, 2021 Share Posted March 23, 2021 IS the servo horn stripped? Quote Link to comment Share on other sites More sharing options...
Tone rc Posted March 23, 2021 Author Share Posted March 23, 2021 Don't think so, how would I know if this is the case? Thanks Quote Link to comment Share on other sites More sharing options...
Nitroholic Posted March 23, 2021 Share Posted March 23, 2021 Take the servo horn off, and look at the splines where it fits on the servo. They can get damaged in a crash, meaning the servo can;t poroperly move the horn to work the steering. Quote Link to comment Share on other sites More sharing options...
Tone rc Posted March 23, 2021 Author Share Posted March 23, 2021 OK thanks this I haven't checked this bit properly then, thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.