Kpowell911 Posted October 22, 2016 Share Posted October 22, 2016 (edited) 1 hour ago, atom3624 said: Just get a 'good used' Stampede then. Must be plenty around. Parts are relatively cheap. Save the extra paid for the Bigfoot if not interested in it, really .... Al. I want a Bigfoot, my mum n dad took me to see it when I was 4/5 in the 90s, I was gutted it wasn't at Monster Jam when I went in Cardiff. Its part of my motoring childhood, like my poster of a purple Lamborghini Diablo SV, but this thread suggested they would be worth a lot in the future which I doubt hence saving the 'special' parts. It appears only the 30th Anniversary Grave Digger body is the only rare and expensive one, so ill just convert it to brushless itll be here Tuesday to send off to Santa... Edited October 22, 2016 by Guns Quote Link to comment Share on other sites More sharing options...
atom3624 Posted October 23, 2016 Share Posted October 23, 2016 Trust me, the standard GD body is selling for stupid money. The purple one went through the roof 6 months ago. FULL GD http://www.ebay.com/itm/1-10-traxxas-grave-digger-brushless-brand-new-/282162764771?hash=item41b2361be3:g:ucUAAOSw5dNWi3V0 BODY http://www.ebay.com/itm/New-Body-Traxxas-Monster-Jam-GRAVE-DIGGER-3680-GraveDigger-1-10-Stampede-VXL-XL5-/122006577422?hash=item1c6828a10e:g:wGQAAOSwnNBXU9yo Don't know how they compare dimensionally - Arial GD body http://www.ebay.com/itm/New-Axial-SMT10-Grave-Digger-Body-/262683233650?hash=item3d29240d72:g:4~gAAOSw4f5YCMp1 Really annoys me. Al. Quote Link to comment Share on other sites More sharing options...
atom3624 Posted October 23, 2016 Share Posted October 23, 2016 Just measured the StamDigger body. ~380 x 160 mm Axial is ~430 x 190 mm Quite a bit bigger unfortunately. Al. Quote Link to comment Share on other sites More sharing options...
Kpowell911 Posted October 23, 2016 Share Posted October 23, 2016 1 hour ago, atom3624 said: Trust me, the standard GD body is selling for stupid money. The purple one went through the roof 6 months ago. FULL GD http://www.ebay.com/itm/1-10-traxxas-grave-digger-brushless-brand-new-/282162764771?hash=item41b2361be3:g:ucUAAOSw5dNWi3V0 BODY http://www.ebay.com/itm/New-Body-Traxxas-Monster-Jam-GRAVE-DIGGER-3680-GraveDigger-1-10-Stampede-VXL-XL5-/122006577422?hash=item1c6828a10e:g:wGQAAOSwnNBXU9yo Don't know how they compare dimensionally - Arial GD body http://www.ebay.com/itm/New-Axial-SMT10-Grave-Digger-Body-/262683233650?hash=item3d29240d72:g:4~gAAOSw4f5YCMp1 Really annoys me. Al. The shells are selling for about $120 in auctions, no ones buying those Buy It Nows. Incould put my x Maxx on eBay for £1500 buy it now. Dont make it worth £1500. That Bigger Axial body would be perfect for a Stampede with ProTrac and an extended chassis Quote Link to comment Share on other sites More sharing options...
atom3624 Posted October 23, 2016 Share Posted October 23, 2016 That's still $60 too much. Pity there's no real 'customer support' for those who actually bought something and require replacements ... Al. Quote Link to comment Share on other sites More sharing options...
Kpowell911 Posted October 23, 2016 Share Posted October 23, 2016 I agree it's over priced, but it's the customers who've drove up the price, and if someone's willing to pay it.... Cant really blame Traxxas for not renewing the contract, they deemed it to not make financial sense, and they obviously know their business. Quote Link to comment Share on other sites More sharing options...
johninderby Posted October 23, 2016 Share Posted October 23, 2016 (edited) If I got one I'd be afraid to run it in case I damaged it. It's not the cost of the parts but rather being able to get ANY replacement part needed. John Edited October 23, 2016 by johninderby Quote Link to comment Share on other sites More sharing options...
atom3624 Posted October 23, 2016 Share Posted October 23, 2016 That's it with my lad. He enjoys it, and has fun driving it. That it's Grave Digger is better. The 'normal' body has headlamps. The purple one has eyes and lamps. He's scuffed the purple, but scraped the 'normal' one a little more. Doesn't use it much, but it sort of puts you off simply letting your lad enjoy himself - of course he's going to 'total' it one day, then what ... If it's really 'hobby grade' I should simply be able to get onto the internet and get fairly priced replacements, not 5x list - stuff that! Looks like everyone has to start with 'disposable Chinese crap' with no licence actual copies or sort-of-looks-like ones. Al. Quote Link to comment Share on other sites More sharing options...
Kpowell911 Posted October 23, 2016 Share Posted October 23, 2016 31 minutes ago, johninderby said: If I got one I'd be afraid to run it in case I damaged it. It's not the cost of the parts but rather being able to get ANY replacement part needed. John Its only the shell really. The other parts are extremely cheap as all it is a Stampede 2wd. It appears all the blue plastics/wheels/tyres are avaliable easily and cheaper. Its probably one of the easiest and cheapest cars to obtain spares for, other than the limited editon shells/box And theres nothing to suggest the Bigfoot will go on to be rare and over priced like the Grave Digger. ID be surprised. Either way its only £15 more than the XL5 and its a "cool" present for Xmas Quote Link to comment Share on other sites More sharing options...
Kpowell911 Posted October 23, 2016 Share Posted October 23, 2016 13 minutes ago, atom3624 said: That's it with my lad. He enjoys it, and has fun driving it. That it's Grave Digger is better. The 'normal' body has headlamps. The purple one has eyes and lamps. He's scuffed the purple, but scraped the 'normal' one a little more. Doesn't use it much, but it sort of puts you off simply letting your lad enjoy himself - of course he's going to 'total' it one day, then what ... If it's really 'hobby grade' I should simply be able to get onto the internet and get fairly priced replacements, not 5x list - stuff that! Looks like everyone has to start with 'disposable Chinese crap' with no licence actual copies or sort-of-looks-like ones. Al. Cant you just stick a normal Pede shell on it or is it the fact its "Gravedigger" to your son? Quote Link to comment Share on other sites More sharing options...
johninderby Posted October 23, 2016 Share Posted October 23, 2016 I'd want to be able to get a spare body along with it so I'd have one for running and one for display. John Quote Link to comment Share on other sites More sharing options...
Kpowell911 Posted October 23, 2016 Share Posted October 23, 2016 2 minutes ago, johninderby said: I'd want to be able to get a spare body along with it so I'd have one for running and one for display. John I bet a lot more people wish they had done that haha Quote Link to comment Share on other sites More sharing options...
Kpowell911 Posted October 23, 2016 Share Posted October 23, 2016 Part #3658 for the Bigfoot, cant see it anywhere though. If I go brushless with this, ill stick a standard shell on it. For pootling around brushed itll be fine. If it gets scuffed it gets scuffed lol Quote Link to comment Share on other sites More sharing options...
atom3624 Posted October 23, 2016 Share Posted October 23, 2016 It's always retrospective isn't it!! Bodies aren't bad at all - purple one you'd have to know where to look, but it's being kept as indicated by John, for show. Same story with my Raminator. It's on it's 5th body now, but that was purchased just as it was finishing production and I never thought to buy 2 or 3 more ... impossible anywhere. Raptor feathers are easier to find!! Al. Quote Link to comment Share on other sites More sharing options...
atom3624 Posted October 23, 2016 Share Posted October 23, 2016 GD body definitely adds character to the bashable chassis. A 'normal Stampede' body would work, but wouldn't be the same. I could get a TBG Spiderman body and get that painted - 'though that would definitely be show only!! Al. Quote Link to comment Share on other sites More sharing options...
johninderby Posted October 23, 2016 Share Posted October 23, 2016 This place lists it but surprise, surprise out of stock. http://jennysrc.com/collections/traxxas-bigfoot-2wd-36084-1/products/bigfoot-blue-body-cover-shell-1-10-firestone-craniac-skully-traxxas-36084-1?variant=30932462086 Would be a big surprise if they actually did have any for sale in the future. John Quote Link to comment Share on other sites More sharing options...
Kpowell911 Posted October 23, 2016 Share Posted October 23, 2016 Whilst I can sort of see your point, and I had the same trouble with an RB ONE R, that said I knew the reprocussions of that when I bought the kit... Its not like there ISNT a single bodyshell avaliable for your Raminator or the Grave digger. There are 100s of different ones avaliable that will fit, so its not like you cant run, you have alot of options, its just not your top choice. You could put a Proline Losi body on your Raminator, and there is even a very similar Skully shell avaliable for your Stampede, on top of all the other options. Its not like you cant buy a differential that has broken, and is rendering the car useless, you do have literally 100s of options, even if they arent your first choice;. Quote Link to comment Share on other sites More sharing options...
atom3624 Posted October 23, 2016 Share Posted October 23, 2016 The Proline Ram shells are much narrower - don't look right - 40-50 mm narrower actually, and twin cab. Once I 'get an image', it must be that ... The Short Course one would be brilliant, if it didn't have a wheel well at the back! Sort of part of the hobby. There are alternative shells which would look great - agreed - Raptor (again) springs to mind. I just want, NEED that look. I suppose it's a bit of a similar thing with the GD. My lad's not as 'complicated' as I am. I suppose I could even get a cheap 'bashing shell', then store / show with the GD shells - way forward. Al. Quote Link to comment Share on other sites More sharing options...
johninderby Posted October 23, 2016 Share Posted October 23, 2016 Silver Bigfoot shell. http://www.ebay.ca/itm/BIGFOOT-SILVER-BODY-Shell-1-10-Summit-Racing-craniac-skully-Traxxas-36084-1-/371744836716?hash=item568db80c6c:g:Z5gAAOSwmLlX5ZjD . John Quote Link to comment Share on other sites More sharing options...
atom3624 Posted October 23, 2016 Share Posted October 23, 2016 I do prefer the blue one. Thing is also, should the stripes be silver or black on the wings? Al. Quote Link to comment Share on other sites More sharing options...
Kpowell911 Posted October 23, 2016 Share Posted October 23, 2016 Bigfoot shell at the moment and for possibly the near future shouldn't be an issue, but I guess thats what the guys thought who bought a Grave Digger. I'm very loyal to the Stampede, IVe had alot of the years, and was toying with converting an XL5 to VXL few months back, the Mrs asked what I wanted for Xmas and I didnt really want anything so I asked for that. IF It was for example £50-100 more than a normal XL5 I wouldnt have bothered but for £15.... I do kinda prefer the standard XL5 Talons however. Quote Link to comment Share on other sites More sharing options...
Kpowell911 Posted October 26, 2016 Share Posted October 26, 2016 its gotta go to some fat bearded chap to re deliver to me on the 25th December. We dont even have a chimney... 1 Quote Link to comment Share on other sites More sharing options...
atom3624 Posted October 26, 2016 Share Posted October 26, 2016 Hey don't go insulting my mate. He may be a little rotund, but his annual workout makes every Olympian look like a wimp!! Looks great mate. Al. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.