scarface87 Posted January 30, 2015 Share Posted January 30, 2015 I have the above esc fitted in my st pro however it will not calibrate my brake/reverse endpoint it's driving me doolally lol I'm using a spektrum dx4s tx anyone had this issue before or any suggestions? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
jony nitro Posted January 30, 2015 Share Posted January 30, 2015 Set your epa to all 100% try that Quote Link to comment Share on other sites More sharing options...
M1tchy Posted January 30, 2015 Share Posted January 30, 2015 Try it with throttle reversed, sometimes that does the trick. Quote Link to comment Share on other sites More sharing options...
scarface87 Posted January 30, 2015 Author Share Posted January 30, 2015 Cheers guys I'll let you know how I get on [emoji106] Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Tug Posted January 30, 2015 Share Posted January 30, 2015 You doing the different points in the right order? Neutral, forward, then finally reverse. Quote Link to comment Share on other sites More sharing options...
scarface87 Posted January 31, 2015 Author Share Posted January 31, 2015 Yes mate it just won't give me the beeps for reverse for some strange reason I still haven't tried the above methods yet so will try that when I get 5 mins Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Tug Posted January 31, 2015 Share Posted January 31, 2015 Is reverse switched off? 1 Quote Link to comment Share on other sites More sharing options...
Vr5fx Posted January 31, 2015 Share Posted January 31, 2015 As above, get it on a program card and check settings. Quote Link to comment Share on other sites More sharing options...
scarface87 Posted January 31, 2015 Author Share Posted January 31, 2015 No ran through all settings everything is as it should be. It ran fine on a cheap muck controller but won't calibrate with my dx4s for some reason Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Tug Posted January 31, 2015 Share Posted January 31, 2015 Then it's not liking the spekky, check settings on the Tx for any anomalies. Quote Link to comment Share on other sites More sharing options...
evssv Posted January 31, 2015 Share Posted January 31, 2015 Then it's not liking the spekky, check settings on the Tx for any anomalies.my speky dx3 calibrated up ok on my xerun150. .. Quote Link to comment Share on other sites More sharing options...
M1tchy Posted January 31, 2015 Share Posted January 31, 2015 Try increasing the end points to 110% or something, Quote Link to comment Share on other sites More sharing options...
scarface87 Posted January 31, 2015 Author Share Posted January 31, 2015 All sorted in the end nearly lost my thumb when it span full throttle on 6s with my thumb inbetween pinion and spur but at least it's calibrated now I can play with my st and cry about my poorly thumb at the same time lol Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
evssv Posted January 31, 2015 Share Posted January 31, 2015 All sorted in the end nearly lost my thumb when it span full throttle on 6s with my thumb inbetween pinion and spur but at least it's calibrated now I can play with my st and cry about my poorly thumb at the same time lol Sent from my iPhone using Tapatalkso what did/didn't u do?? Quote Link to comment Share on other sites More sharing options...
nr73 Posted January 31, 2015 Share Posted January 31, 2015 All sorted in the end nearly lost my thumb when it span full throttle on 6s with my thumb inbetween pinion and spur but at least it's calibrated now I can play with my st and cry about my poorly thumb at the same time lol Sent from my iPhone using Tapatalk Wow that's not good! I had my savage flux runaway in my conservatory on 6s. I also have the xerun 150a ESC but mine had a dodgy 'set' button at the time and managed to recalibrate the throttle without me knowing it. Next time I switched it on, on a stand, it went full throttle which on 6s was enough to pancake the tyres completely. They burnt my arm, hit the stand and it got free. Three standing backflips later one of the lipo's got flung out and killed it. From that point on I always remove the wheels when doing any work like that. Oh, and I replaced the set switch! Quote Link to comment Share on other sites More sharing options...
scarface87 Posted January 31, 2015 Author Share Posted January 31, 2015 It was a mix of the esc being a turd and the spekky being a turd I had to reverse throttle and put motor wires wrong to cancel it out get it calibrated then put it all back straight again. I too removed the wheels after the only reason it happened was coz it was on its wheels and tried to take off lol I tried catching it but thumb hit spur and pinion Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
nr73 Posted January 31, 2015 Share Posted January 31, 2015 You're lucky you didn't lose a thumb there! Quote Link to comment Share on other sites More sharing options...
jony nitro Posted January 31, 2015 Share Posted January 31, 2015 Don't forge pinion next time,hahaForget* Quote Link to comment Share on other sites More sharing options...
M1tchy Posted January 31, 2015 Share Posted January 31, 2015 Wheels off and 2s next time then lol Quote Link to comment Share on other sites More sharing options...
scarface87 Posted February 1, 2015 Author Share Posted February 1, 2015 I think so too lol Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
atom3624 Posted February 1, 2015 Share Posted February 1, 2015 Ouch! Al. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.