.AJ. Posted April 19, 2021 Author Share Posted April 19, 2021 I cut out the body with standard lexan scissors, I followed the lines from the inside and it trimmed up lovely. To mark the post holes I used blue tack on the inside and then push down when I was happy with positioning, I then double checked the position with a ruler, nothing worse than wonky body post holes 😂😂😂 Once I was happy I drilled the centre point with a 3mm bit and then worked up to 8mm, the front fit perfect, so i then moved on to the rear using the same technique as before Happy to say I got all 4 holes spot on👌 One problem tho, I have no 1/8 sized body clips 🤣🤣🤣 1 Quote Link to comment Share on other sites More sharing options...
.AJ. Posted April 19, 2021 Author Share Posted April 19, 2021 It also came with some decals 👍 2 Quote Link to comment Share on other sites More sharing options...
.AJ. Posted April 19, 2021 Author Share Posted April 19, 2021 The Metal Mulisha stickers have stuck on well, the supplied ones are rubbish 🤣🤣🤣 I reckon with silver windows it will look pretty decent 👌 1 Quote Link to comment Share on other sites More sharing options...
Paul Busby Posted April 19, 2021 Share Posted April 19, 2021 I found that a little bit of heat helped normal stickers stay on better. Mine have only come off due to my terrible driving. 1 Quote Link to comment Share on other sites More sharing options...
.AJ. Posted April 19, 2021 Author Share Posted April 19, 2021 The supplied ones are rubbish, they are really thick so they won’t sit down properly, I’ll probably order some more vinyl in red and make my lights up. I can’t see the MM ones coming off anytime soon, they aren’t cheap stickers and you can definitely tell 👍 Quote Link to comment Share on other sites More sharing options...
Popular Post .AJ. Posted April 20, 2021 Author Popular Post Share Posted April 20, 2021 What a difference windows make 😁 4 Quote Link to comment Share on other sites More sharing options...
Stormbringer Posted April 20, 2021 Share Posted April 20, 2021 Looks a lot better now mate 1 Quote Link to comment Share on other sites More sharing options...
.AJ. Posted April 20, 2021 Author Share Posted April 20, 2021 Yeah looks pretty decent now 😂 Quote Link to comment Share on other sites More sharing options...
stimpy Posted April 26, 2021 Share Posted April 26, 2021 Now you best go scratch it!!! 🤣 Looks good that body mate 👍 1 Quote Link to comment Share on other sites More sharing options...
Paul Busby Posted April 26, 2021 Share Posted April 26, 2021 Yeah get it scratched. Once you scratch it up, fill the scratches in with paint and they start to look much less like a bin lid, and a bit more like an RC body. Quote Link to comment Share on other sites More sharing options...
tomr Posted May 1, 2021 Share Posted May 1, 2021 I’ve followed this thread from the beginning but the temptation is beginning to get too much ........think I’m going to have to build one of these for myself . Aj, do you know if there is a wing and body that fits this? 2 Quote Link to comment Share on other sites More sharing options...
.AJ. Posted May 2, 2021 Author Share Posted May 2, 2021 Yeah the wing from then et/nt48 fits, but you can’t run the rear bumper and wing mount at the same time, they do 2 different heights if I remember right. Then you could use a outcast style of body 👍 1 Quote Link to comment Share on other sites More sharing options...
tomr Posted May 3, 2021 Share Posted May 3, 2021 Right I’ve got a 410 and steel spur in my basket at Rprc, is there anything else you guys recommend adding before I checkout ? Ive got the electrics and wheels sorted just need to pick a body or two for it👍 1 Quote Link to comment Share on other sites More sharing options...
.AJ. Posted May 3, 2021 Author Share Posted May 3, 2021 8 minutes ago, tomr said: Right I’ve got a 410 and steel spur in my basket at Rprc, is there anything else you guys recommend adding before I checkout ? Ive got the electrics and wheels sorted just need to pick a body or two for it👍 The Tekno alloy servo arm 👍 2 Quote Link to comment Share on other sites More sharing options...
Paul Busby Posted May 3, 2021 Share Posted May 3, 2021 Just now, .AJ. said: The Tekno alloy servo arm 👍 Definitely this.... otherwise I think your good really. The steel centre diff might be a good idea if you're planning on going 6S, but otherwise the truck is solid stock. 2 Quote Link to comment Share on other sites More sharing options...
tomr Posted May 3, 2021 Share Posted May 3, 2021 I knew I’d forgot something....alloy servo horn 😁 Chucked in a set of power tool tips as well. Thanks guys 👍 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.