Vr5fx Posted November 18, 2017 Share Posted November 18, 2017 (edited) Hobao Hyper ST E-PRO Hyper ST Pro converted to Electric. Got some spares with it Center Spider diff is leaking a little, but spare seals are included. Front and rear T-bones The front Tbone pulled out, so I put 5mm thread screws into the front with washers to stop it doing it again. Shell has a few cracks at the back Front shock upright is currently a STD ST, the shell posts on the Pro version have worn down Tyres are taped with Gorilla tape Crack in front upright, but been there since day 1, spares are there. Been sat for a few months, so expect diffs to have dribbled. PM for more details and/or questions £130 posted, buyer to cover fees ****************************************************************************************************************************************************************************************** ELC-6s Works as it should. Previous owner cut the cables quite low, so new wires were attached, they look tatty, but didn't have any issues myself. £45 posted, buyer to cover fees [SOLD PENDING PAYMENT] ****************************************************************************************************************************************************************************************** HPI TORK 2200 Not seen much use by myself, great motor, only a few marks on the can and fins. £65 posted, buyer to cover fees [SOLD PENDING PAYMENT] ****************************************************************************************************************************************************************************************** Basher Hellseeker Built and used twice. Rear upper arm took damage, so was replaced with an eyelet that was slightly shorter. A larger than standard servo was put in, so some of the chassis has been cut out to fit the servo. Hot glue used to fix the servo in place so can easily be removed and fixed in by other means. Runs well on 2s Radio gear not included £45 posted, buyer to cover fees Edited December 15, 2017 by Vr5fx Quote Link to comment Share on other sites More sharing options...
Vr5fx Posted November 21, 2017 Author Share Posted November 21, 2017 (edited) Tamiya Honet. Spares repairs. [SOLD] Sold as seen. The manual speed controller is broken, but the motor seems to work. Smells musky from storage before I got it. Short thread here. £45 posted. Edited December 15, 2017 by Vr5fx Quote Link to comment Share on other sites More sharing options...
Vr5fx Posted November 26, 2017 Author Share Posted November 26, 2017 (edited) DX2E Transmitter only £15 posted, buyer to cover fees. ********************************************************************************************************************************************************************* Flysky FS-T6 6 channel transmitter. TX only £10 posted, buyer to cover fees. Edited December 15, 2017 by Vr5fx Quote Link to comment Share on other sites More sharing options...
Vr5fx Posted November 28, 2017 Author Share Posted November 28, 2017 (edited) Motor and ESC sold. ********************************************************************************************************************************************************************** Hyper 8.5 pro brushless conversion. 1/8 buggy clear out. Last used in summer, so is a bit dusty. Spider diffs front, rear and center Both front upper arms have cracks through part of them, same place on both sides, doesn't affect use. Shell is a bit battered Wheels and tyres should be fine for bashing, quite tatty and some have come unglued. If I find any other 1/8 buggy parts, I'll chuck em in with this. £110 posted, buyer to cover fees. Edited December 15, 2017 by Vr5fx Quote Link to comment Share on other sites More sharing options...
Vr5fx Posted December 1, 2017 Author Share Posted December 1, 2017 Bump Quote Link to comment Share on other sites More sharing options...
Vr5fx Posted December 5, 2017 Author Share Posted December 5, 2017 Bump Quote Link to comment Share on other sites More sharing options...
Vr5fx Posted December 9, 2017 Author Share Posted December 9, 2017 SFS Quote Link to comment Share on other sites More sharing options...
Vr5fx Posted December 15, 2017 Author Share Posted December 15, 2017 (edited) Bump Hornet Sold Edited December 15, 2017 by Vr5fx Quote Link to comment Share on other sites More sharing options...
Vr5fx Posted December 22, 2017 Author Share Posted December 22, 2017 Bump Quote Link to comment Share on other sites More sharing options...
Smoothybb Posted December 23, 2017 Share Posted December 23, 2017 Would you split the sand paddles and shell from the buggy? If so, PM how much delivered. Quote Link to comment Share on other sites More sharing options...
Vr5fx Posted December 24, 2017 Author Share Posted December 24, 2017 4 hours ago, Smoothybb said: Would you split the sand paddles and shell from the buggy? If so, PM how much delivered. Sorry, not willing to split at the moment. Quote Link to comment Share on other sites More sharing options...
Smoothybb Posted December 24, 2017 Share Posted December 24, 2017 6 hours ago, Vr5fx said: Sorry, not willing to split at the moment. No worries. Good luck with the sale. Quote Link to comment Share on other sites More sharing options...
Vr5fx Posted December 28, 2017 Author Share Posted December 28, 2017 TTT Quote Link to comment Share on other sites More sharing options...
Gavster29 Posted December 28, 2017 Share Posted December 28, 2017 What are spares compatibility between the 8.5 and 7?Sent from my TA-1033 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Skiprat1977 Posted February 17, 2018 Share Posted February 17, 2018 On 28/11/2017 at 20:56, Vr5fx said: Motor and ESC sold. ********************************************************************************************************************************************************************** Hyper 8.5 pro brushless conversion. 1/8 buggy clear out. Last used in summer, so is a bit dusty. Spider diffs front, rear and center Both front upper arms have cracks through part of them, same place on both sides, doesn't affect use. Shell is a bit battered Wheels and tyres should be fine for bashing, quite tatty and some have come unglued. If I find any other 1/8 buggy parts, I'll chuck em in with this. £110 posted, buyer to cover fees. Long shot.... still available? Quote Link to comment Share on other sites More sharing options...
Vr5fx Posted February 17, 2018 Author Share Posted February 17, 2018 49 minutes ago, Skiprat1977 said: Long shot.... still available? PM sent Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.