bieomax Posted January 28, 2017 Share Posted January 28, 2017 Welcome Steve, looks like a good track for abit of bashing.Sent from my HTC One M8s using Tapatalk Quote Link to comment Share on other sites More sharing options...
bieomax Posted January 28, 2017 Share Posted January 28, 2017 Just found this, look familar? http://helion-rc.com/rockRiderBR/Sent from my HTC One M8s using Tapatalk Quote Link to comment Share on other sites More sharing options...
Gaz! Posted January 28, 2017 Share Posted January 28, 2017 I like the look of the helicon much more than the ftx offering. still not 100% convinced on them though.... Quote Link to comment Share on other sites More sharing options...
DanDare Posted January 28, 2017 Share Posted January 28, 2017 On 27/01/2017 at 00:57, t2boats said: Surprised at the speed Dan, even with just a 2S I'd have thought the brushless motor would've propelled it towards or over the 30mph mark.. my stock brushed motor with a 3S Lipo up its backside and a 16v esc managed 34mph. I was pleasantly surprised! I ran it on 2S and it delivered 22mph.. big difference. I wanted to do a few more speed runs with the Rustler again today while I had the time so took the Outlaw again. today it done 26.8mph under the same conditions as before. But, then I looked at the channel 2 EPA & it was on 100%, max is 120% ! I then remembered I'd turned it down a bit the first time I ran it on the gravel car park of our village hall So with the EPA now on 120% I tried again & it recorded 30.2mph. I'm ok with that, as said it's not exactly built for high speed & 30mph is plenty off-road. Quote Link to comment Share on other sites More sharing options...
t2boats Posted January 28, 2017 Share Posted January 28, 2017 That's a better result! can your GPS read in both mph and kph? Quote Link to comment Share on other sites More sharing options...
johninderby Posted January 28, 2017 Author Share Posted January 28, 2017 Quite like the look of the SCT version. http://www.ebay.co.uk/itm/SHORT-COURSE-TRUCK-OCTANE-BLAST-OFF-ROAD-1-10-ELETTRICO-SPAZZOLA-4WD-RTR-VRX-/351750477523?var=&hash=item51e5f656d3:m:mAYMRHD9zrcpxRl4538iSiA 1 Quote Link to comment Share on other sites More sharing options...
DanDare Posted January 28, 2017 Share Posted January 28, 2017 1 hour ago, t2boats said: That's a better result! can your GPS read in both mph and kph? Not simultaneously but it can be set for either. Quote Link to comment Share on other sites More sharing options...
ProBlitz Posted January 28, 2017 Share Posted January 28, 2017 i like the SCT look but not those bodys xD wounder wich SCT bodys would on the woutlawEnviado do meu EVA-L09 através de Tapatalk Quote Link to comment Share on other sites More sharing options...
t2boats Posted January 29, 2017 Share Posted January 29, 2017 Hmmm I've got a spareSCT shell sat in the shed, I reckon it'd fit too Quote Link to comment Share on other sites More sharing options...
johninderby Posted January 29, 2017 Author Share Posted January 29, 2017 This body shell would look good. https://www.modelsport.co.uk/index.php?product_id=368297&gclid=Cj0KEQiAwrbEBRDqxqzMsrTGmogBEiQAeSE6Zc4Q3d4YIk_BhgH7M8jRiX-Lg0fCkP5Ix_KDh-qVk1gaApO38P8HAQ John Quote Link to comment Share on other sites More sharing options...
bieomax Posted January 29, 2017 Share Posted January 29, 2017 It'll be good to keep an eye on the rebrands for different coloured hopupsSent from my HTC One M8s using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Geehawk Posted January 29, 2017 Share Posted January 29, 2017 Am I the only one who really likes the standard Outlaw shell especially in the red. Would not say no to a few hop-ups in something other than electric blue though 1 Quote Link to comment Share on other sites More sharing options...
johninderby Posted January 29, 2017 Author Share Posted January 29, 2017 I like the standard shell just fine actually. May get a clear shell and do it another colour though. John 1 Quote Link to comment Share on other sites More sharing options...
Geehawk Posted January 29, 2017 Share Posted January 29, 2017 Indeed. I'd like to do an orange/black combo would clash with the blue shocks though ! Quote Link to comment Share on other sites More sharing options...
t2boats Posted January 29, 2017 Share Posted January 29, 2017 23 minutes ago, Geehawk said: Am I the only one who really likes the standard Outlaw shell especially in the red. Would not say no to a few hop-ups in something other than electric blue though I like the stock shell too originally I'd bought some illuminous orange and green spray paint as I was buying a Yeti XL kit, but one thing led to another and I ended spending that money elsewhere.. so they're still there to be used! Quote Link to comment Share on other sites More sharing options...
bieomax Posted January 29, 2017 Share Posted January 29, 2017 I like the standard shell just fine actually. May get a clear shell and do it another colour though. JohnAye thats my plan too, i mention it to the guy at freeprawn on friday when i popped in, so they maybe getting some in.Sent from my HTC One M8s using Tapatalk Quote Link to comment Share on other sites More sharing options...
t2boats Posted January 29, 2017 Share Posted January 29, 2017 42 minutes ago, Isle of Wight Basher said: I too like the standard shell and indeed the whole Ultra 4 look. However I do want a SCT with rear trailing arm suspension, maybe another Outlaw to convert is the answer for me ! Just thought, I could do that with the Outlaw I won at Xmas! Aren't I a jammy bugger 2 Quote Link to comment Share on other sites More sharing options...
johninderby Posted January 29, 2017 Author Share Posted January 29, 2017 1 hour ago, t2boats said: Just thought, I could do that with the Outlaw I won at Xmas! Aren't I a jammy bugger ..........or should be 1 Quote Link to comment Share on other sites More sharing options...
ProBlitz Posted January 29, 2017 Share Posted January 29, 2017 (edited) i also like the outlaw body but i think a sct body in it would be even better the team durango seems to fit well , maybe one of these and maybe some trenchers evo sc flo tek f 150 Edited January 29, 2017 by ProBlitz Quote Link to comment Share on other sites More sharing options...
johninderby Posted January 29, 2017 Author Share Posted January 29, 2017 (edited) While ordering the few little FTX bits clicked on the buy button for the clear Outlaw body. Now black or orange?????? John Edited January 29, 2017 by johninderby Quote Link to comment Share on other sites More sharing options...
ProBlitz Posted January 29, 2017 Share Posted January 29, 2017 31 minutes ago, johninderby said: While ordering the few little FTX bits clicked on the buy button for the clear Outlaw body. Now black or orange?????? John i would go black or black/orange or black/neon green Quote Link to comment Share on other sites More sharing options...
t2boats Posted January 29, 2017 Share Posted January 29, 2017 2 hours ago, johninderby said: ..........or should be Haha! I've found a nice shell on eBay which would suit it, still waiting for the Outlaw to be delivered though 1 Quote Link to comment Share on other sites More sharing options...
bieomax Posted January 29, 2017 Share Posted January 29, 2017 Lost power on my brushed today, wont go forward or backwards, going to slave an old motor in first to see if its the ESC or motor thats goneSent from my HTC One M8s using Tapatalk Quote Link to comment Share on other sites More sharing options...
bieomax Posted January 29, 2017 Share Posted January 29, 2017 Appears to be the motorSent from my HTC One M8s using Tapatalk Quote Link to comment Share on other sites More sharing options...
johninderby Posted January 29, 2017 Author Share Posted January 29, 2017 1 hour ago, Isle of Wight Basher said: The more I use and work on this car the more I like it, Had a great run today but broke both the battery support bars when I "landed" on the spare wheel ! I'll bodge em for now, and will be trying the standard brushless motor next, I bought a new brushless Hooligan roller for £65 off the bay, it came with the standard 4 pole 2950Kv brushless motor and servo. The carbon chassis is very nice Never thought that the alloy battery supports would be needed. Still trying to decide on whch sensored BL set-up to,go with. John Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.