bieomax

I probably didn't try to go below a 17 teeth above is the plastic prototype from ...2017. If I get some time I'll have a look in the garage over the weekend and dig it out ... but I'm notoriously unreliable so we'll see 😄

My apologies all, I'd made this years ago now 🙄 I cant be bothered looking through the whole of this tread to see if anyone else made an adjustable mount for the Outlaw So I still cant find the actual STL file for the cad side but noticed the site I used offers a shop function so I've enable it. I've set it to £0 mark up so i aren't making anything from it. Disclaimer is as far as i remember some of the tolerances are a touch tight so if you use this you'll need to potentially file faces of the location lugs (square bits) you may also need to file/drill the screw holes just to very slightly open them. Also i only ordered it in the Steel Natural Unpolished, not sure if the other options again change the dimensions or if they just use a different printing medium. They do offer other materials like aluminium but the cost is alot higher (£46 for a natural aluminium, £75 for a titanium 😲) intended use is to have the elongated hole at the top and rotate the motor on the bottom screw, tighten in line with normal RC pinion/spare setup/spacing processes. material needs to be metal as plastic will deform from the heat of the motor. At some point I will check some old HDD's and publish the cad to a normal sharing site do people can do what they want with it. my apologies again for my slackness Enjoy Mark. https://i.materialise.com/en/shop/search?query=ftx https://i.materialise.com/en/shop/item/ftx-outlaw-motor-mount-prototype/

Thats just down right scary [emoji38] Sent from my SM-G930F using Tapatalk

Started to clean up the Landfreeder after having a great bash on the beach while on holiday. Everything help up fine, barring at one stage the esc went out of config with the controller. Re-set and all is fine. Also randomly lost 1 screw from the front body post.

Ive got the same kit fitted to the landfreeder If you still want some measurements let me know. Sent from my SM-G930F using Tapatalk

Aye it would sound like a weaken motor mount or loose screws if your getting motor movement. Sent from my SM-G930F using Tapatalk

I took general shape measurements from my original plastic one and just created one in designspark mechanical ( free 3d software ) Then uploaded that file to a online 3d printers who can do metal. Ive used a plastic printer at work, but the with this design there isn't enough plastic above the slotted area to handle the heat/forces applied by a motor, which is why it ended up in a metal material. Sent from my SM-G930F using Tapatalk

My design so far Sent from my SM-G930F using Tapatalk

I've got a design for one too, which i had 3d printed in steel ( plastic for the first run but they warped with heat - a few guys here had one, moved to steel as a steel print was £16 opposed to 30+ for aluminium from the site i used ) I got the first one done which needed a slight fettle with a needle file but has worked fine so far. Need to check if i adjusted the 3d/cad file and i'll make available. Sent from my SM-G930F using Tapatalk

I went with gmade gt02 beadlock wheels and the cheap iroc clones that John had posted about Sent from my SM-G930F using Tapatalk

Done a little work today on the Landfreeder, fitted some underframe bling [emoji16] Sent from my SM-G930F using Tapatalk

I'd say yes as the standard is a 550 brushed can. Its only the sensored brushless 550/3660's which are a touch tight as they start getting abit close to the steering. Off the top of my head i think its about 65mm clearance between gearbox and the steering assembly. Sent from my SM-G930F using Tapatalk

Is it normal for a slipper on a trailer/crawler ? or is it just driveline protection as it looked like a 550 can through a reduction box so I'm guess it's got some torque? I do like the look of hobao parts Sent from my SM-G930F using Tapatalk

Fitted the gpm steering kit on the cc01, just need to sort the servo arm now really, kicking myself as i so nearly picked up 3 bags of rod end pairs tonight at the model shop, but put one back Sent from my SM-G930F using Tapatalk

Thanks John, i'll hopefully check it out tonight Sent from my SM-G930F using Tapatalk

A gpm steering kit for the tamiya CC01 Sent from my SM-G930F using Tapatalk

Started my first decal session. Building loved it, stickering not so Still awaiting on the gpm steering, but good enough to chase the kids around the living room with at the moment. But after stickering it'll get a clear matt finish and a smoke to the windows i think. Although i am wondering on a interior/ driver? Sent from my SM-G930F using Tapatalk

Time to get waterproofing [emoji4] Sent from my SM-G930F using Tapatalk

Thats what i was meant to be shopping for before i got the CC01, still a little sad i didnt go for the black edition. Sent from my SM-G930F using Tapatalk

Starting too, got a gpm kit ordered Sent from my SM-G930F using Tapatalk

My first kit [emoji16] Sent from my SM-G930F using Tapatalk

Nothing RC related, although have ordered something today [emoji16] Sent from my SM-G930F using Tapatalk

Looking good, how many pieces will you print in ? Sent from my SM-G930F using Tapatalk

It does look pretty Sent from my SM-G930F using Tapatalk

Hex driver is a must. Think i ended up with a fastrax one with 4 or 5 ends on the handle http://www.modelshopleeds.co.uk/catalog/product_info.php?cPath=632_606&products_id=20229 Not had any problems with the above over this last year. Sent from my SM-G930F using Tapatalk