supersavage's Contrast Q15

[supersavage]

2 hours ago, Carpmart said:

Yep, more than enough!

 

Why so many?

 

Haven't a clue so you'd have to ask the previous owner, perhaps they stocked up when they went to the Euros. 

[supersavage]

The engine, exhaust and the air box and filter has been ordered.

[Carpmart]

Good stuff Marc... it's a keeper then!  

[supersavage]

Yep just need to locate a suitable servo horn for the throttle/brake servo.

[supersavage]

This thing is why I'm having a bit of trouble finding a servo horn

 

 

 

Edited January 6, 2017 by supersavage

[Rover Man]

Have you had a chat with Mark Grant ??? he will sort you out 

[supersavage]

I haven't yet but will do if I don't get any replies on the BRCA Facebook page. 

[Rover Man]

4 minutes ago, supersavage said:

I haven't yet but will do if I don't get any replies on the BRCA Facebook page. 

 

Tag him in it so he gets a notification or just message Oddie 

 

 

Just tagged Mark to get the ball rolling 

[supersavage]

Trying to decide whether to run a kill switch on this or not. It's very unlikely that it'll be run anywhere other than a track but it still might save me from a very expensive repair bill. 

[SlayerLayer]

I would for a few quid compared to what it could cost if you had a run away, I've never needed to use my killswitch because of any fault but i still always fit one to every engine.

[supersavage]

The engine is in the process of being built in the meantime I need to work out what battery will fit in the battery box or make my own box and use a shorty. 

[supersavage]

Need to work out how to mount this 

 

 

To around here some how

 

 

 

[supersavage]

New engine 

 

 

 

It's just sitting there at the moment as I need to find out how to install the clutch and what hardware is needed to install the engine properly. 

[Carpmart]

And what a nice new engine it is too!  

[supersavage]

[Fly In My Soup]

On 14/02/2017 at 16:08, supersavage said:

 

That's looking well tasty.

 

P.s if your clutch bell is 54mm diameter then this may interest you.

 

 

I bought for my harm, but it's already running an aftermarket clutch set up, so it won't work for me!

 

I'm only wanting £45, retail on this lot is over £200!!

Edited February 18, 2017 by Fly In My Soup

[Fly In My Soup]

Also, is that tank cap standard??

[supersavage]

It's getting there slowly and can't wait to drive it. 

 

No I believe it's something similar to one of these http://radiocontrolracing.co.uk/epages/62f803ea-babc-40f7-92ac-4405acab24f1.mobile/en_GB/?ObjectPath=/Shops/62f803ea-babc-40f7-92ac-4405acab24f1/Products/5800

[Fly In My Soup]

Nice, I think my tank may be too narrow for such a wide threaded neck though

 

Thanks for the link!!!

[supersavage]

I already have a clutch setup but thanks for the offer 

[supersavage]

Fitting new bearings 

 

[supersavage]

Engine has been properly installed

 

[supersavage]

Pic in the sun

 

 

 

I've ordered a new body for it as the previous owner didn't fit this one very well and it's annoying me. 

[supersavage]

Definitely getting closer to being ready to race

 

[Fly In My Soup]

Your in your stride now matey!

 

I have a feeling of emptiness when a build ends... A void that can only be filled with another build