SlayerLayer

My esc doesn't even have a name 😅 but should i replace motor and esc or change the pinion gear its 14 tooth. If so any links would be helpful if possible.

@Stormbringer yeah that's what i meant going to s3 or s4, how can i find out if the esc can handle s3 as it almost seems like there's no writing on it unless it's on the underside but it's glued into the box. Yeah it is but i can literally slow walk much faster than it can go at full speed and I've been out with a few other guys who have crawlers and they easily leave mine for dust 😅🤣

So i currently only have 1 electric car axial scx10 but it's very slow, to make it go faster can i just use bigger lipos currently running on s2 or do i need new motor and esc. I've been away from the hobby for probably 5 or 6 years i still have quite a few nitro and petrol cars, but i have almost 0 knowledge about electrics as such exept they're good for running steering and throttle servos 😂 so any info would be appreciated.

I have the round stock one filter and foam as well as the upgraded tgn foam for the stock round filter. https://www.freeprawnracing.co.uk/losi-5ive-t-dt-1-stock-inside-filter-element-dt1-2001.html https://www.freeprawnracing.co.uk/losi-5ive-t-dt-1-stock-outer-filter-element-dt1-2002.html

It's definitely my favourite car in my collection atm and it's definitely a good reliable car

Yeah I've got some of them that's what i used endless supply from work

The o ring seemed like it shrunk lol it had a little play in the grove but it was all intact and no splits I've not replaced them all and re fitted find out soon if its alright now

It didn't leak at the end with the gasket or where the gear is, it only leaked out of the other side as i could see all the platter marks on the car lol

My centre diff on the losi 5ive t has leaked it was virtually empty when i opened it and it leaked from the back. So what would you guys say it was the shim or the o ring or replace the case? I was thinking i could have been the o ring?

I would for a few quid compared to what it could cost if you had a run away, I've never needed to use my killswitch because of any fault but i still always fit one to every engine.

I see you live in great Yarmouth, i live in Lowestoft if your still active on the forum let me know, we sometimes go out to bash not many race tracks near here depends on what your running.

I'm in as long as it's within around 5 hour drive lol

Oh yeah that's me in the picture aren't i handsome and young lol

This is my living room every year at Christmas and maybe 1-5% is my doing lol.

I whent with motul in the end as its fully synthetic and the one i have now is fully synthetic and looked the best all around. Thanks everyone for the great options you all provided My little project is nearly finished