DUBZN1 Posted May 17, 2016 Share Posted May 17, 2016 Running 2200kv motor After 18 month of hard 3 and 6s , it finally gave up so it did really well Replaced the complete unit and 5 min into a 6s run on grass , it was smoking I had locked down the clutch as tight as it would go as I run a centre diff My question is - Do I get a new set of pads and spur and go for it again ? Or is there any other options ? Is the hotracing 6 shoe clutch unit worth a chance ? First time I've had any major problems with it Quote Link to comment Share on other sites More sharing options...
Jorbench94 Posted May 17, 2016 Share Posted May 17, 2016 Not familiar with the set up but try lock down and back off 1/2 to a 1/4 turn. Quote Link to comment Share on other sites More sharing options...
turok007 Posted May 17, 2016 Share Posted May 17, 2016 you can get solid blocks/pads Quote Link to comment Share on other sites More sharing options...
Kpowell911 Posted May 17, 2016 Share Posted May 17, 2016 Hot Racing Clutch I ran on mine, was loads better! Quote Link to comment Share on other sites More sharing options...
DUBZN1 Posted May 17, 2016 Author Share Posted May 17, 2016 Did you run the hotracing clutch hard ??? It looks very well made Quote Link to comment Share on other sites More sharing options...
Tug Posted May 18, 2016 Share Posted May 18, 2016 If you've over-tightened it, you might have fractured the cast ally clutch assembly, this means it'll always slip. Have a close look for cracks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.