arogon1235 Posted April 26, 2013 Author Share Posted April 26, 2013 the rx ariel had a cut in it and some wres were cut to but still works fine Quote Link to comment Share on other sites More sharing options...
ratman Posted April 27, 2013 Share Posted April 27, 2013 Rite let me get this straight, you have a car that could potentially hit 100mph but you are running it with wires with cuts in that will potentially give you interferance??? Do you think thats safe!! Also maybe if you had listened and shortened wires then things would hav cuts in them Quote Link to comment Share on other sites More sharing options...
arogon1235 Posted April 27, 2013 Author Share Posted April 27, 2013 The car ran fine and hit just above 70mph but then ran into problems with lipos as i think they are on there way out but the rest if the testing went fine Quote Link to comment Share on other sites More sharing options...
bodgemonkey Posted April 27, 2013 Share Posted April 27, 2013 Pics/vids/speed gun readouts? Quote Link to comment Share on other sites More sharing options...
arogon1235 Posted April 27, 2013 Author Share Posted April 27, 2013 didn't get any video or gun read outs Quote Link to comment Share on other sites More sharing options...
ScottPro8.5 Posted April 27, 2013 Share Posted April 27, 2013 Oh Quote Link to comment Share on other sites More sharing options...
UltimateRC Posted April 27, 2013 Share Posted April 27, 2013 Pics or it didn't happen... 1 Quote Link to comment Share on other sites More sharing options...
Alex97 Posted April 27, 2013 Share Posted April 27, 2013 How do u know it did about 70 with no gun readings Quote Link to comment Share on other sites More sharing options...
UltimateRC Posted April 27, 2013 Share Posted April 27, 2013 How do u know it did about 70 with no gun readings He ran after it 1 Quote Link to comment Share on other sites More sharing options...
Alex97 Posted April 27, 2013 Share Posted April 27, 2013 Lol Quote Link to comment Share on other sites More sharing options...
bodgemonkey Posted April 27, 2013 Share Posted April 27, 2013 Surprise level= -9000 1 Quote Link to comment Share on other sites More sharing options...
arogon1235 Posted April 27, 2013 Author Share Posted April 27, 2013 (edited) but i am trying to get the day off school for the 15th of may because there is another practice event then so i will able to get some readings the and hopefully i should have my 4s and 5s lipo by then Edited April 27, 2013 by arogon1235 1 Quote Link to comment Share on other sites More sharing options...
arogon1235 Posted April 27, 2013 Author Share Posted April 27, 2013 He ran after it i had to run after it once when the rear belt came of the pully Quote Link to comment Share on other sites More sharing options...
arogon1235 Posted April 29, 2013 Author Share Posted April 29, 2013 well after the practice event i also noticed that the lipo's kept coming out so i decided to make this http://i.imgur.com/jqqMnFw.jpg also found a nice smooth carpark and a nice long stretch of smooth loading bay at the back of the stores were they un-load stuff should be able to get a run on 6s this sunday Quote Link to comment Share on other sites More sharing options...
Oh How Original Posted April 29, 2013 Share Posted April 29, 2013 I'm not really one for negativity but this has to be said. So your "impossible to come out" lipo cables didn't work then? :lol: Quote Link to comment Share on other sites More sharing options...
arogon1235 Posted April 29, 2013 Author Share Posted April 29, 2013 They wernt done up tight enough but with the new lipo tray it will protect them even more Quote Link to comment Share on other sites More sharing options...
Oh How Original Posted April 29, 2013 Share Posted April 29, 2013 I don't buy that sorry, if a cable tie isn't tight enough and a potential explosive and fire hazard is practically skimming the ground, you at least tighten the cable ties as much as possible Quote Link to comment Share on other sites More sharing options...
arogon1235 Posted April 29, 2013 Author Share Posted April 29, 2013 They arnt cable ties it was velcro Quote Link to comment Share on other sites More sharing options...
ratman Posted April 29, 2013 Share Posted April 29, 2013 LISTEN TO THE ADVICE THAT PEOPLE GIVE YOU!!! Quote Link to comment Share on other sites More sharing options...
Alex97 Posted April 29, 2013 Share Posted April 29, 2013 Cable ties would look a LOT better than your battery box 1 Quote Link to comment Share on other sites More sharing options...
dopeydog Posted April 29, 2013 Share Posted April 29, 2013 One fail after another. 1 Quote Link to comment Share on other sites More sharing options...
Cabbagey Posted April 29, 2013 Share Posted April 29, 2013 (edited) Pro tip: people will like you more if you embed images Edit: also, wires man Edited April 29, 2013 by Cabbagey Quote Link to comment Share on other sites More sharing options...
arogon1235 Posted April 29, 2013 Author Share Posted April 29, 2013 thats what im sorting out next and i am changing the motor bullets to 5.5mm bullets. i should have it done by this week end Quote Link to comment Share on other sites More sharing options...
danny boy Posted April 29, 2013 Share Posted April 29, 2013 Hey dude. How long do you need the battery tray to be? May have a couple of things that could help you but depends on dimensions. Quote Link to comment Share on other sites More sharing options...
arogon1235 Posted April 29, 2013 Author Share Posted April 29, 2013 (edited) i'll get the dimensions now L=16cm W=7.5cm H=4cm Edited April 29, 2013 by arogon1235 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.