Rusty1103 Posted October 31, 2012 Share Posted October 31, 2012 Yeah ni Quote Link to comment Share on other sites More sharing options...
loonynino Posted October 31, 2012 Share Posted October 31, 2012 I will look for it rusty. Paddy ur not a gold member, U won't bvable t play online with us, lol. Quote Link to comment Share on other sites More sharing options...
PaddyB Posted November 1, 2012 Share Posted November 1, 2012 Ill hve you know that i am a gold member... thank you very much However as I'm building my new sim rig, I have canceled my subscription until my new wheel, pedals, cockpit etc all arrive Should all be complete within the next 2 weeks Quote Link to comment Share on other sites More sharing options...
mini-z-awd Posted November 2, 2012 Share Posted November 2, 2012 going by the weather it looks like light showers with some sunshine so was wondering if the bash will go ahead or not i hopeso as i need to run this hyper and see what i can break this time atleast i have spare knuckles now Quote Link to comment Share on other sites More sharing options...
stef1 Posted November 2, 2012 Author Share Posted November 2, 2012 (edited) Rob, I had a quick play around with a couple of bits of tubing i cut off one of the 2m lengths, below is a pic of how 2 of the joints will look. I had a play around with the welder too just trying to get it set up. Not sure if i will be able to make bathgate on sunday yet Edited November 2, 2012 by stef1 Quote Link to comment Share on other sites More sharing options...
mini-z-awd Posted November 2, 2012 Share Posted November 2, 2012 was just wondering if any of you guys had a tap and die set for threading screw holes i think its a m3 or m4 screw one i would need just asking before i go and buy one Quote Link to comment Share on other sites More sharing options...
mini-z-awd Posted November 3, 2012 Share Posted November 3, 2012 (edited) double post oooops Edited November 3, 2012 by mini-z-awd Quote Link to comment Share on other sites More sharing options...
stef1 Posted November 3, 2012 Author Share Posted November 3, 2012 was just wondering if any of you guys had a tap and die set for threading screw holes i think its a m3 or m4 screw one i would need just asking before i go and buy one Yes mate. Not sure if I will see you on Sunday though.. Quote Link to comment Share on other sites More sharing options...
mini-z-awd Posted November 3, 2012 Share Posted November 3, 2012 Yes mate. Not sure if I will see you on Sunday though.. if you make it that would be great if not the next time would be ok as iam in no real hurry just hope i can get these knuckles done incase i need them Quote Link to comment Share on other sites More sharing options...
mini-z-awd Posted November 3, 2012 Share Posted November 3, 2012 new wheels and tyres finaly showed up just hope the weather is ok for tomorrow so i cna see if there any good or not Quote Link to comment Share on other sites More sharing options...
stef1 Posted November 3, 2012 Author Share Posted November 3, 2012 if you make it that would be great if not the next time would be ok as iam in no real hurry just hope i can get these knuckles done incase i need them Are you after taps and does or just the taps? If its just taps i will give you my tap drivers as they are good for doing knuckles etc Quote Link to comment Share on other sites More sharing options...
mini-z-awd Posted November 3, 2012 Share Posted November 3, 2012 (edited) Are you after taps and does or just the taps? If its just taps i will give you my tap drivers as they are good for doing knuckles etc the one that go`s into the knuckle to make a thread for the screw i think its the tap one. its basicly just that the knuckles i got the screw holes are ok on one side and the other side seem`s abit dodgey the screw will go in too far before it bites any metal to hold it so if i can tap it then get some new screw`s that work it would save me trying to flog them on to someone else but if this doesnt work then i will just flog them on again. if you make it tomorrow that would be great if not like i said all get them the next time your down and try and them out Edited November 3, 2012 by mini-z-awd Quote Link to comment Share on other sites More sharing options...
stef1 Posted November 3, 2012 Author Share Posted November 3, 2012 the one that go`s into the knuckle to make a thread for the screw i think its the tap one. its basicly just that the knuckles i got the screw holes are ok on one side and the other side seem`s abit dodgey the screw will go in too far before it bites any metal to hold it so if i can tap it then get some new screw`s that work it would save me trying to flog them on to someone else but if this doesnt work then i will just flog them on again. if you make it tomorrow that would be great if not like i said all get them the next time your down and try and them out the one that go`s into the knuckle to make a thread for the screw i think its the tap one. its basicly just that the knuckles i got the screw holes are ok on one side and the other side seem`s abit dodgey the screw will go in too far before it bites any metal to hold it so if i can tap it then get some new screw`s that work it would save me trying to flog them on to someone else but if this doesnt work then i will just flog them on again. if you make it tomorrow that would be great if not like i said all get them the next time your down and try and them out No worries mate, If I'm not there with the cars i will come through on the bike for a bit to have a catch up lol. Due Robert money anyway so I need to get that to him Quote Link to comment Share on other sites More sharing options...
PaddyB Posted November 3, 2012 Share Posted November 3, 2012 Stef get off line and enjoy yer dinner Stef was a legend today! Built me a stand for my bucket seat, today I'll get some pics posted when it's all finished so you can see how it looks, but so far it's looking real good.. Once painted/covered and with feet it will be fantastic! So, We have 1 slight speed bump to over come and it's "feet" for the metal..??? Now after much discussion and more horrendous ideas by me, stef mention some sort of liquid rubber type stuff that ni Quote Link to comment Share on other sites More sharing options...
mini-z-awd Posted November 3, 2012 Share Posted November 3, 2012 No worries mate, If I'm not there with the cars i will come through on the bike for a bit to have a catch up lol. Due Robert money anyway so I need to get that to him you can only come with the bike if you dont try and jump it :whistling: :sweatdrop: j iam hoping the weather is good enough for a bash just wondering if anyone else will be there were are you guys are you all hiding lol Quote Link to comment Share on other sites More sharing options...
loonynino Posted November 3, 2012 Share Posted November 3, 2012 Sorry guys, not had time t come on here, me, Robert and Paul are going crawling up at beecraigs tomorrow, so won't be at the track. I have a set of tap and dye so stef U don't need t come down on purpose, Robert don't mind waiting till next time he sees you. Mini z message me ur number and i will text you when im back home. Quote Link to comment Share on other sites More sharing options...
PaddyB Posted November 3, 2012 Share Posted November 3, 2012 What abut this magic rubber dip ni Quote Link to comment Share on other sites More sharing options...
loonynino Posted November 3, 2012 Share Posted November 3, 2012 Its called plasti dip you can find it on eBay, I think its 15.99 a tub. Quote Link to comment Share on other sites More sharing options...
PaddyB Posted November 3, 2012 Share Posted November 3, 2012 Fantastic Thanks fella Quote Link to comment Share on other sites More sharing options...
mini-z-awd Posted November 3, 2012 Share Posted November 3, 2012 Sorry guys, not had time t come on here, me, Robert and Paul are going crawling up at beecraigs tomorrow, so won't be at the track. I have a set of tap and dye so stef U don't need t come down on purpose, Robert don't mind waiting till next time he sees you. Mini z message me ur number and i will text you when im back home. thanks nino it will like you say save stef coming all the way down here for nothing and hopefully next sunday will be a good day for a bash Quote Link to comment Share on other sites More sharing options...
PaddyB Posted November 4, 2012 Share Posted November 4, 2012 (edited) I've been looking for a business that would make custom made rubber feet/caps does anyone know of a good rubber fabricator type thing in In the area that would take such a small job? Edited November 4, 2012 by PaddyB Quote Link to comment Share on other sites More sharing options...
mini-z-awd Posted November 4, 2012 Share Posted November 4, 2012 I've been looking for a business that would make custom made rubber feet/caps does anyone know of a good rubber fabricator type thing in In the area that would take such a small job? it would probably be too dear for them to take such a small job i.e if you want 4 you would have to have someone else wanting a few dozen of the same thing to make it worth while for them todo it soit would have to be one hell of a bulk order Quote Link to comment Share on other sites More sharing options...
stef1 Posted November 4, 2012 Author Share Posted November 4, 2012 Polyurethane sealant would be another option and make a mould of some sort to stick the feet in - PU sealant sticks like **** to everything lol Quote Link to comment Share on other sites More sharing options...
PaddyB Posted November 4, 2012 Share Posted November 4, 2012 Interesting, making a mould may not be so easy though, I suppose I could juts dip it in a bowl of it until it drys, and then cut/trim around it I'm gonna pop into the bike shop this week and gt some handlebar tape to cover it when it's finished. It's about 90% there though so well chuffed, just a few little screw alignment issues and some feet and that's it done Quote Link to comment Share on other sites More sharing options...
mini-z-awd Posted November 4, 2012 Share Posted November 4, 2012 think iam glad i didnt go out today its bloody freezing lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.