Was there a guide to how to set up the ESC @Wobby's Hobby's? Failing that, have you got make and model? You'll be needing to set end points on the throttle but not all ESCs are equal......
I can't remember if his is a scx10 or 10.2! I think it may be the original 10.... Yep, 2 door in the end, not as long as I wanted or advertised so I got money off in compensation [emoji16] Sent from my Pixel 5 using Tapatalk
My son will be getting his new JK body next weekend and has been very adamant recently that trimming and fitting is his project and i'm not to take over! Cheeky so and so!!
If you don't mind getting yours done by next weekend that'd be greatly appreciated @Badcrumble so I can at least provide some pointers!
I know those rotors!
I've had to change out from SSD hubs to Ali express specials which I have to say are brilliant!
The rig looks great; how do you find the weight bias now the motor is up front? Much difference?
I've a feeling you're wanting a lower turn for more wheels speed rather than higher turn for more torque / less wheels speed?
The RTR shipped with a 35t which is fairly standard middle of the road so unless that's given up the game i'd try messing about with a few pinion sizes but check the heat of the ESC and motor regularly.
Are you using 3s or 2s lipo @NeoScorcher?
You're probably safest messaging him via fbook @Paulnb57; https://www.facebook.com/ventru.crawler.parts/
I'd be dead nervous scouring shapeways for something that looks right!
Get a Y harness at the same time. Wiring instructions in the packet but also online I imagine. Search castle bec y harness. As oho has pointed out, dont cheap out if you're going to do it [emoji106] Sent from my Pixel 5 using Tapatalk
You're getting only 30 mins from a 4500 3s!!? I'd expect to get at least 2 hours on any of my rigs with that much mah! What rig is it? Sent from my Pixel 5 using Tapatalk
I would, get the full 8.4v out of it [emoji106] Difficult to find amp's on that servo though but I'd expect it would like more than the ESC can chuck at it. Sent from my Pixel 5 using Tapatalk
Probably a good choice going brushed in this and swapping the power to the Gatekeeper oho.
I've found https://www.modelsport.co.uk/index.php?product_id=441301 do the job perfectly well for servo horns now. I used to order in from wherever so it's a relief to find something close to home and available in a couple of days.
Wheels and tyres look great👍
I've seen a few people use the outer film to help with painting on windows seals; you need a steady hand to cut though! Hemi chap on the tube is damn handy with a can of paint and knife!