Jump to content

Nitroholic

Members
  • Posts

    17,661
  • Joined

  • Last visited

  • Days Won

    115

Status Replies posted by Nitroholic

  1. Went to a local Facebook RC club/group meet today. What a poop show.
    Maybe 25+ people there and although friendly enough people there it was really dangerous. 
    Was held on a small industrial estate type area. I was there for maybe 15 minutes before I saw some poor guy (maybe in his late 40's early 50's) get wiped out by a huge 10kg+ monster truck. Literally took his legs out and smashed him to the ground.
    Driver was apologetic obviously but there was no safety or basic rules arranged by any of the so called club leaders. 
    I've spoken to the guy who got hit and he's actually in a lot of pain now, ...hurt his back & ribs as well as a few cuts/bruises. 
    I stayed for only a short while after that accident then left. Didn't even bother taking my RC truck out of the car in the end so slowly discharging my batteries now back to storage charge. Waste of a day.   

    1. Nitroholic

      Nitroholic

      It doesn;t need rigid rules, brifings and all that...it just needs common sense.

       

      You have an area to drive/spectate, and the area you run in..... and you don;t just wander in to the cars area......when the drivers see an upside down car...they should pause to let the guy recover it. Ramps have a direction....and you stick to it... and drivers of big stuff need to respect drivers of little stuff.....or just don;t run them together.

       

      It needs a bit of consideration for others, and a load of common sense.

       

      Sadly, at that get together, both were sorely lacking. Theats when people do get hurt.

    2. (See 13 other replies to this status update)

  2. YouTube finally managed to get rid of dislikes.  But it just makes the likes pointless now.  also tutorial videos  are going to be a minefield

  3. What am I looking at paying for an import from USA duty and vat wise 

     

    Item is 230 bucks from amain

     

     

     

     

  4. What am I looking at paying for an import from USA duty and vat wise 

     

    Item is 230 bucks from amain

     

     

     

     

  5. Reversed into the neighbours car this morning! DOH!

  6. If your going to make an account to post pics from other web sites and pass them off as your own, dont  bother. We always find you in the end lol 

  7. The best parcel text message scam so far stating I missed a parcel at 09:52am today  on 29/10/21 and to follow the link. 
    Funny that, because I’m not expecting anything, it’s the 30th and it’s only 08:50am! Try harder next time :lol: 

  8. hi eveyone been  offair for a  while blame my meds and old age🙂 however its nice to be back,just renewed my gold membership for £12 my first payment was £5 though how time flys will say the £12 is worth every penny though,stay safe all of you and looking forward to getting back into the grove with all off you......

  9. Yooo whats going on with Arrma’s prices?? 😂😂😂

     

    https://wheelspinmodels.co.uk/i/330480/

  10. Yooo whats going on with Arrma’s prices?? 😂😂😂

     

    https://wheelspinmodels.co.uk/i/330480/

  11. What TX?  i use a futaba 4PM but just got a spektrum dx5 pro in a bundle  should i stick with the futaba or go spek

  12. Dewalt have announced new battery packs that they're calling "pouch stacks". Sounds like they're switching to lithium polymer packs and moving away from lithium ion cylinders. Should mean far more power coming to power tools everywhere (let's face it, all tool manufacturers will have to follow suit), plus a few more fires from bad handling by rough tradesmen. 

     

     

     

  13. Im fully expecting to be schooled here, this is a genuine question however. Rising energy prices. I get the initial reasons, and its dominating the news. But didnt Putin/Russia say the other day they can supply it and prices then dropped 40%? Whats the issue still? Is it a reluctance to deal with Russia?

  14. Browsing the "For RC Sales" section really isn't a good idea when skint...............

     

     

     

    P.S. Will someone please buy Capri Boy's Savvy Flux, the temptation is just too much.

  15. If i put all, or most of my RC cars up for sale, its not me giving up but feel a bit of a reboot coming on, thinking it may be a good idea to have just one real nice crawler like the TRX4 Ranger i keep telling myself i will be getting

    1. Nitroholic

      Nitroholic

      I have thought several times about thinning out the collection, as they don;t get a lot of use...but....

       

      well...I couldn't sell my Savage.... it's been a loyal servant and is almost part of the family.

      I couldn't sell Truckzilla.... its the final form of many years of evolution, and I would never find another twin motor XL chassis....

      I don;t want to sell my short Baja....shortened to FG length and widened to fit an FG Jeep shell...

      Can't sell the 6 wheel Hyper.... or the Savage XS.....or the Stampede with the home made chassis and van shell.....and I certainly won;t sell my brushless conversion Madforce Kruiser.

       

      ...so....its kind of hard to sell any of your cars when they have been modified and tinkered with so much that virtually all of them are modified, have hours of effort put in, and all carefully honed to make them just the way I like them. You can't buy cars like this...you have to make them yourself 🙂

    2. (See 12 other replies to this status update)

  16. Is there any harm to the engine if the carb has been adjusted on the first run from factory settings? ps: Losi 5ive engine

  17. 5 litres of unleaded swap for Ford transit connect any takers 😂

  18. changed the spark plugs on the car and now its knocking! Great

  19. Whats happened to Petrol RCs? I saw Talbots new video and out of curiosity thought Id look at some…… Modelsport have 2, Wheelspin have 3…… none are in stock until next year?

  20. just found out my car failed its mot with the following:

     

    Do not drive until repaired (dangerous defects):

    • Nearside Front Tyre tread depth below requirements of 1.6mm inner edge (5.2.3 (e))
    • Offside Front Tyre tread depth below requirements of 1.6mm inner edge (5.2.3 (e))
    • Nearside Front Tyre has a tear, caused by separation or partial failure of its structure inner sidewall (5.2.3 (d) (ii))

    Repair immediately (major defects):

    • Windscreen washer provides insufficient washer liquid (3.5 (a))
    • Offside Headlamp aim too high and too far to the right. (4.1.2 (a))
    • Nearside Front Position lamp not working (4.2.1 (a) (ii))
    • Offside Front Position lamp not working (4.2.1 (a) (ii))
    • Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
    • Front Exhaust has a major leak of exhaust gases (6.1.2 (a))
    • Power steering component leaking (2.1.5 (a))
    • Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
    • Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
    • Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
    • Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
    • Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
    • Nearside Front Upper Coil spring insecure not fitting correctly (5.3.1 (a) (i))

     

    that is alot, normally only have 2 things wrong 😞 

    1. Nitroholic

      Nitroholic

      hitting those is probably whats done hte balljoints...and the spring. It will be insecure or not fitting because it probably got a permanent 'set' in it from banging over speed bumps.

      Probably be able to get a pair of good used ones for the fornt. If one is gone...the other is probably not a lot better

    2. (See 28 other replies to this status update)

  21. just found out my car failed its mot with the following:

     

    Do not drive until repaired (dangerous defects):

    • Nearside Front Tyre tread depth below requirements of 1.6mm inner edge (5.2.3 (e))
    • Offside Front Tyre tread depth below requirements of 1.6mm inner edge (5.2.3 (e))
    • Nearside Front Tyre has a tear, caused by separation or partial failure of its structure inner sidewall (5.2.3 (d) (ii))

    Repair immediately (major defects):

    • Windscreen washer provides insufficient washer liquid (3.5 (a))
    • Offside Headlamp aim too high and too far to the right. (4.1.2 (a))
    • Nearside Front Position lamp not working (4.2.1 (a) (ii))
    • Offside Front Position lamp not working (4.2.1 (a) (ii))
    • Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
    • Front Exhaust has a major leak of exhaust gases (6.1.2 (a))
    • Power steering component leaking (2.1.5 (a))
    • Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
    • Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
    • Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
    • Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
    • Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
    • Nearside Front Upper Coil spring insecure not fitting correctly (5.3.1 (a) (i))

     

    that is alot, normally only have 2 things wrong 😞 

    1. Nitroholic

      Nitroholic

      3 illegal tyres..... er...good job it was the MOT station telling, you not a traffic cop.

      That would be 3 points and a £60 fine PER OFFENCE.....and you got 3. 9 points and £180. You would also be facing a walk home, as they would not let you get back in and drive.

       

      But seriously...that last tyre issue, with a failing sidewall is VERY dangerous. Thats just waiting for a blowout to happen.

       

      A blowing exhaust is always going to screw up the running and probably is the reason the O2 sensor reading was off. If you had no screenwash in the container...thats another 3 point offence....but it may just be a clogged pipe or the washer pump is goosed. Split rubbers on the balljoints and failed balljoints go together. Would be worried about a front spring not fitting properly....Do you have a lot of speed humps where you live?

    2. (See 28 other replies to this status update)

  22. What is it with ebay sellers  they say pictures will be up in a day or so.  but never do  they even relist the item many times  but still no pictures.

  23. What is it with ebay sellers  they say pictures will be up in a day or so.  but never do  they even relist the item many times  but still no pictures.

  24. Looking at trail bikes at the moment, gotta love the "no MOT, but would pass one easily" ads...!!!

×
×
  • Create New...