Leaderboard

early birthday present from parents via modelsport

.......... maybe you shouldn't be driving.......

Baja FWEND I'm concentrating on my 2 lunchbox's, 2 hong nor scrt's, 2 tt01's, traxxas slash, 2 turnigy rallys and my baja, Oh and this hyper st when I get it up and running. Gonna stick the mugen mbx5 brushless buggy and savage stuff up for sale when I can get enough room on the work bench to take some pics LOL Was gonna sell what was left of my ansmann short course but ive just nicked the shocks, motor and esc for one of the lunchbox's so there's nowt much left of it now LOL

Yeh iv got the bug lol , its more amazing and fun than i thought it was gonna be

MM I'm sending you a PM Cheers N

Don't bother with them, waste of cash tbh. The gains in power/torque are so little you won't notice them. If you want more power your best bet is to change the engine.

My 8t might be going in the sales section this weekend as a roller

Magic, I am going to be attempting my first body paint soon so a perfect find. It is not going to be anything as fancy as this but a good foundation is worth laying. I ordered liquid mask yesterday, 10 quid for a little bottle, and today realised I have a gallon of latex sitting in the hall grrrr.. I am just masking up the inside of a juice bottle to see if it works and first coat looks very promising

Run a club or bash group? You can now have your own sub-forum for your members to discuss upcoming events, past events, share photos/videos and other general banter! You can see some of these sub-forums in action here. If you wish to setup your own sub-forum, please send me a PM (Private Message) with some more information about your club, where you are located and estimate amount of members and we can get you setup. For established club sub-forums, I can now provide moderator status to club owners to manage and edit topics within your section. Please send me a PM for more information. Thank-you, Nick.

On my first ever nitro rc car (HPI Bullet ST 3.0) and using Optifuel RTR 20% and it is smokey. I think once i've got through this bottle of fuel, i'll change to the 'Race' version instead.

All bagged and ready to post

+1 on the losi not being suitable for indoors...unless you living room is the size of a small village hall with no furniture.

The pulley (bit with cord wrapped around) is binding for some reason. If it works fine when off engine then it must be getting clamped between the backplate and pullstart casing when you fit it....as a test you could put a washer between the backplate and casing on each screw....if that fixes the issue then make a gasket/shim to fit between backpl/casing..

Took a break from the screen and drove the ally-Maxx around the park. She's a top truck these days, it feels good to iron out the niggles. I actually clipped a steel post at speed, lost steering and figured I'd done some serious damage! A blip of reverse, a blip of forward and that freed up the servo-saver and she was off again like it had never happened! Happy days!

new skids for sunday lmfao

if you still want a 27Mhz AM trigger style transmitter i have a few spare, you can have one for

jealousy will get you know where you know you want one lol upgraded/homemade body mounts led kit battery box on the back for the led kit battery box and the cushty stickers on the windows pimped out pumpkin lmfao

Remember to paint/draw in the window rubbers, really finishes these off.

Same as all alphas - http://www.alpha-rc.com/download.asp

When I used it I noticed that bottom was ok but top end was a beast! Mate of mine has the a852 and it screams from the start.

Is this a nitro conversion ??

The propper way rc's should be ;P

Trackstar 200a esc for my Baja flux Finaly Sent from my iPhone using Crapatalk 2

I got an s50 for

mine seem be 7.5mm mine is dremel 7700

Not wrong there Deafty! Can tell their R&D department looked at the Serpent for inspiration! Still not a patch on it though.. This looks a nice bit of kit but the video is utterly pointless to go by. I want to see a video of the "Basher" actually being.. bashed. Not just calmly driven around on a flat dusty surface where there is zero chance of breakages! Jump it.. Flip it.. Crash it.. Do something with it to prove it can actually be bashed for god's sake. I mean come on, who just drives a truggy like that? Snooze fest! For the price though, I'd be interested if I didn't have the Hong Nor.

Here you go Deafty this should keep you happy in your shock quest FRONTS REAR Hope that helps you out and clears it up once and for all

if they dont fit I send em bak........when on 6s i was only using small amonuts of throttle. ....thk I mite invest in sum 5s....I could use em in the hyper aswell then.....

Well plus around 3 other baja's in bits but they don't take to the camera as well Hard work and patience and you will have money trust me. Nope with that many I would say your the dealer! Possession with the intent to supply.

Nor me. I dont see why its needed. The mobile version of this forum is very good compared to most I have used.

But I get by just fine on my S4 by using the mobile version of the forum, surely that's enough?

great, thanks guys. I was looking around on different sites for a good deal and I found a s28 from jemodels for

Ok, so after discovering a track just round the corner, i've decided to blow my budget out the window and i'm going to go for the Losi 8ight T 3.0 If i decide that racing aint for me, at least i know that it can soak up plenty of abuse as a basher

We tried Ogmore at the weekend, good fun till I popped a universal joint.........on my Rustler. Next day wasn't much fun cleaning sand out of motors, gearboxes,etc. If anyone's interested I've posted details of a few places I've found/thought of in another conversation http://www.msuk-forum.co.uk/topic/80335-bashing-sitestracks-in-swales/page-2 I think I've taken this conversation off topic too much, sorry RevoMikey.

Frog your more likely to cause chaos on the motorway doing 50 Pmsl

I picked up a waterproof turnigy one from the bay for about 15quid that was way more KG than the standard one, works a treat and steers a lot more direct. I'm running a large thick washer instead of the e-clip in the servo saver too so I have the right spring compression against the top plate but it's impossible for a washer to decide to leave like my e-clips always did

Are you not being passed by lorries moving 5mph faster all the time? That's probably worse than doing 80 and keeping out of their way

Try not to tighten the bolts down to much.

I've just boxed up my 4.1 engine as I've sold the roller to my mate. Cracking engine and the hyper seems to like it too! Sent from my HTC one using my thumbs

yeah, one way bearing, pretty common, easy to fix. edit: Here are some from the bay, check sizes though as i have never owned a Hyper 7 before http://www.ebay.co.uk/itm/HF0810-One-Way-Bearing-12mm-x-8mm-x-10mm-Needle-Rollers-NEW-/140956498305?pt=UK_ToysGames_RadioControlled_JN&hash=item20d1a97981 This needs a vice or simalar to press out the old one and press in the new one but not everyone is equiped or comfortable doing this so heres a ready made one - straight swap http://www.ebay.co.uk/itm/NEW-Pull-Start-One-Way-Bearing-12mm-Hex-6-mm-Shaft-12-x-6-Pullstart-Free-POST-/141216686871?pt=UK_ToysGames_RadioControlled_JN&hash=item20e12ba317

do you ever bash dwarfy as your cars always look immaculate or do you strip them everytime you bash. I bet you fold your clothes up and night and leave they nice and neat aswell for the morning Love your motors fella shows a real passion or far too much time or obsessive compulsive disorder, not sure which though, but cant fault you great motors.

Test fit this lot together, just need rest of my bits to come back start the rebuild properly then

I've had my slash 2 years and still on the original vel spec - I changed the pinion to 16 and temps been good on 3s. I was expecting it to go, but it keeps on going... The combo recommended was what I heard everyone saying so would be my choice, it must be a trusted replacement.

Got fan on motor with heat sink cured my overheating problem on three lipo

Who would race on the roads.... Crazy fools! ... Look for me in the union jack onsie in the convertible mustang

My money says Bazzokajoe in the Porshe, Nitroholic on the bike! Both hoonigans!

Well said TW.

2lbs up??!!?? 100.9kg of Noj, which isn't good....bloomin biryani last night I reckon

Still need to log into Facebook to look at the pics mate....you may get a better response if you upload them to a photo hosting website where they are free for anybody to look at.

Well, I'll let you be the judge of that when I do lower it