Jump to content
  • Join our community

    Sign-up for free and join our friendly community to chat and share all things R/C!

RTR-Team Corally Kronos XTR 6S - 2021 (2022 spec) – 1/8 truggy inc rx/tx 2x8k 4S and charger


Scottyb

Recommended Posts

RTR Team Corally Kronos XTR 6S - 2021 (2022 spec) – 1/8 truggy - £480, PP fees and delivery included in the price.

 

For sale is my 2021 Kronos XTR that I’ve had since new in September last year. It will come with a Hobbywing Max8 ESC (with program card) and 2200kv motor which currently has the stock 13T pinion on it but will come with a 15T hardened steel pinion aswell. Has a brand new 25kg DSServo and DumboRC TX and Gyro enabled RX. There’s also a 40mm aluminium case high RPM Rocket fan on the motor and a 25mm one in the ESC.


The truck now has everything upgraded to the 2022 version so it’s basically the new 2022 apart from the new 4mm shock pistons which I couldn’t get hold of (have a pack of standard ones for spares). 
(2022 spec list https://www.modelsport.co.uk/product/corally-kronos-xtr-6s-2021-18-monster-truck-lwb-roller-chassis-1336166 )


This also comes with an Arrma wing, rear carbon fibre tower brace inserts and a single wheel wheelie bar. It did break a few weeks ago as it is plastic (alu ones can be bought) but I’ve reinforced it with some 6082 T6 Aluminium and it’s held up quite well so far. I have replaced the front steering links with the plastic one piece ones as the turnbuckles kept breaking on the metal ones and had no issues since putting the plastic ones on, there is also a brand new pair included in the spares.


All the drive cups are upgraded to spring steel, 7075 steering brace and the new tower to tower brace.


The shocks have Arrma hard springs front and rear and were serviced with new oil (700CST) last week and all the seals were checked. All 3 diffs have been serviced today (13/04/22) and they were thoroughly cleaned and oil replaced, They still look brand new and it won’t be run again until you own it. The rear has 30k, Centre 500k and front 50k. I’ll include the oil have left if you wanted to switch them around.


The shell is a fair bit scratched up and battered but it’s still in one piece and fine for bashing around. I do have a full decal sheet if you want to replace the stickers on it. The Front and rear skid plates have a fair bit of scratches but everything is straight on it and the chassis is 9/10 condition with only a couple of extremely light scratches on it.


Also included is a SkyRC T100 dual charger and 2 nearly brand new CNHL 8000mah 4S batteries (less than 2 months old and were £125)


This is a full package and you don’t need anything else other than a couple of tools. Charge it up and away you go.


 As you can see in the pics it comes with a large amount of spares including shock pistons, replacement 7075 front upper deck, hubs, front A arms, All the original drive cups still in 8/10 condition, Original springs, bearings, screws etc etc etc.
It will all come packed in the original box but may have to send 2 packages if it all doesn’t fit.


It was only ran on 4S which was enough for me and these are absolutely mental on 6S. It is an awesome bit of kit and been quite reliable.

 

I will sell with no electronics for 360 with all the spares but would rather it go as an entire package.


Any questions or specific pictures drop me a line.

 

Picture links :

 

https://ibb.co/yXzgWYR
https://ibb.co/JR7rGCN
https://ibb.co/sRB7Cyt
https://ibb.co/M7x7qz1
https://ibb.co/8XzTW0Q
https://ibb.co/h1wkHYh
https://ibb.co/7CDMXN2
https://ibb.co/tb9L2ks
https://ibb.co/JRq8v0L

 

 


 

Edited by Scottyb
Link to comment
Share on other sites

  • .AJ. locked this topic
Guest
This topic is now closed to further replies.
×
×
  • Create New...