ChrisT Posted April 26, 2020 Author Share Posted April 26, 2020 Could either be an ESC or RX. Tamiya tend to use their own electronics for catalogue/brochure pics. Saying that though, looking at other pics I can make out another electronic device, just a servo and the device you've circled. Good to see the adaption for 4 body posts, that means were not limited to just the FE shells. 1 Quote Link to comment Share on other sites More sharing options...
GMballistic Posted April 26, 2020 Share Posted April 26, 2020 1 minute ago, ChrisT said: Good to see the adaption for 4 body posts, that means were not limited to just the FE shells. Yep it is good. Personally if I buy one it will definitely be staying as the Formula E model. I love all the aero and look of it, ...would be fun also to see how fast I could make it. 😎 1 Quote Link to comment Share on other sites More sharing options...
TWINSET Posted April 27, 2020 Share Posted April 27, 2020 (edited) 13 hours ago, GMballistic said: Circled in red below is the mystery part. Does anyone know what it is? Wondered if maybe it was a Tamiya ESC?? It's a Tamiya receiver (TRU = Receiver) The ESC is tucked under the damper on the other side Edited April 27, 2020 by TWINSET 2 Quote Link to comment Share on other sites More sharing options...
Alex97 Posted April 27, 2020 Share Posted April 27, 2020 14 hours ago, ChrisT said: 4 minutes ago, TWINSET said: It's a Tamiya receiver (TRU = Receiver) The ESC is tucked under the damper on the other side That's gonna be tight to wire up 1 Quote Link to comment Share on other sites More sharing options...
ChrisT Posted April 27, 2020 Author Share Posted April 27, 2020 Haha that's proper tight Quote Link to comment Share on other sites More sharing options...
supersavage Posted April 27, 2020 Share Posted April 27, 2020 If they come out with some Le Mans prototype style body's I'd definitely be interested in this. Quote Link to comment Share on other sites More sharing options...
TWINSET Posted April 27, 2020 Share Posted April 27, 2020 (edited) 1 hour ago, ChrisT said: Haha that's proper tight No motor or RX wires in press shots, there's probably some super-expensive Tamiya right-angle connectors in the pipeline 😆 Edited April 27, 2020 by TWINSET 1 Quote Link to comment Share on other sites More sharing options...
Alex97 Posted April 27, 2020 Share Posted April 27, 2020 For £250 I want hex screws!!!!! 2 Quote Link to comment Share on other sites More sharing options...
TWINSET Posted April 27, 2020 Share Posted April 27, 2020 (edited) Just buy a decent JIS screwdriver Edited April 27, 2020 by TWINSET 2 Quote Link to comment Share on other sites More sharing options...
GMballistic Posted April 27, 2020 Share Posted April 27, 2020 8 hours ago, TWINSET said: It's a Tamiya receiver (TRU = Receiver) The ESC is tucked under the damper on the other side Thanks for the insight. 😉 8 hours ago, Alex97 said: That's gonna be tight to wire up Yeah tbh that look's a PITA. I mean I love the look of this thing but I don't do shelf queens anymore, ...only runners and I'm not sure you could fit some of the ESC's I'd like to put in it. 🤔 Will be interesting to see when it does come out what space there is and what people are able to do. Quote Link to comment Share on other sites More sharing options...
Kpowell911 Posted April 29, 2020 Share Posted April 29, 2020 (edited) That looks unreal I love it haha! Does look crazy tight for electrics though! Whats the smallest stuff available? Looks like a regular sized servo and 540 motor, receivers are pretty small, but ESC height could be an issue? Im sure it'll be fine as Im pretty sure Tamiya know more than me The names confused me, I expected a this to be a follow on from the TA, TB, TC IS a TT02 replacement in the pipeline? Edited April 29, 2020 by Guns Quote Link to comment Share on other sites More sharing options...
GMballistic Posted April 29, 2020 Share Posted April 29, 2020 15 minutes ago, Guns said: Does look crazy tight for electrics though! Whats the smallest stuff available? Looks like a regular sized servo and 540 motor, receivers are pretty small, but ESC height could be an issue? That's what concerns me, ...some of the ESC's I have used are quite tall with the fans on top. Recently fitting a Hobbywing ESC in one of my other speed run RC's, a Serpent S120 which is 1/12th scale, I had to remove the fan in the end so that I could fit the body shell on it. Not having a fan usually isn't a problem though as with speed running I usually make one pass and then leave to cool but couldn't "bash" without an ESC fan for sure. Won't be a problem though if people add a touring car body shell as you could make a plinth on top to mount the ESC and even RX but you couldn't do that if you want to run the Formula E shell. Quote Link to comment Share on other sites More sharing options...
BashingBrian Posted April 30, 2020 Share Posted April 30, 2020 (edited) On 27/04/2020 at 18:00, GMballistic said: I mean I love the look of this thing but I don't do shelf queens anymore, ...only runners and I'm not sure you could fit some of the ESC's I'd like to put in it. 🤔 TPpower and MMX8 ...🤣🤣🤣 Just found this image showing different shell and bodymounts..👍🏼 Edited April 30, 2020 by BashingBrian 1 Quote Link to comment Share on other sites More sharing options...
GMballistic Posted April 30, 2020 Share Posted April 30, 2020 8 hours ago, BashingBrian said: TPpower and MMX8 ...🤣🤣🤣 I was actually thinking XLX. 🤔 😆 😉 😉 1 Quote Link to comment Share on other sites More sharing options...
PraetoR Posted April 30, 2020 Share Posted April 30, 2020 A Tekin RS would fit, wouldn't it? Quote Link to comment Share on other sites More sharing options...
BashingBrian Posted April 30, 2020 Share Posted April 30, 2020 1 hour ago, GMballistic said: I was actually thinking XLX. 🤔 😆 😉 😉 Challenge accepted...🤣🤣🤣 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.