kenny_st Posted December 10, 2017 Author Share Posted December 10, 2017 Think my shell will be dipped, gave it to the guy on Saturday, just waiting on a few designs from him 3 Quote Link to comment Share on other sites More sharing options...
QRC Posted December 10, 2017 Share Posted December 10, 2017 Just ordered some new Velcro for the sides, old stuff just wasn’t cutting it !!. Quote Link to comment Share on other sites More sharing options...
kenny_st Posted December 10, 2017 Author Share Posted December 10, 2017 Them side clips really are a pain, mark the shell I noticed and will also be doing the Velcro Quote Link to comment Share on other sites More sharing options...
QRC Posted December 10, 2017 Share Posted December 10, 2017 Also going to get a set of tether cables for the top two pins, Swingy P’s me thinks. 1 Quote Link to comment Share on other sites More sharing options...
hoss Posted December 11, 2017 Share Posted December 11, 2017 I'll get some limiting cables made up for these too (I make all the others ) So I'll look into the sizes and what's needed and build up some kits Quote Link to comment Share on other sites More sharing options...
kenny_st Posted December 11, 2017 Author Share Posted December 11, 2017 (edited) mark when making them can you get a better clamping on them Edited December 11, 2017 by kenny_st Quote Link to comment Share on other sites More sharing options...
hoss Posted December 11, 2017 Share Posted December 11, 2017 7 minutes ago, kenny_st said: mark when making them can you get a better clamping on them It's ME who makes them Think I said to you via messenger before though If you send me back your problem one's I'll make you up some more I did have a small batch of poor eyelets which wouldn't hold on the cables properly But there was very few So by all means give me a shout and I'll give you my personal address Just been looking at the buggy one's this afternoon Quote Link to comment Share on other sites More sharing options...
QRC Posted December 11, 2017 Share Posted December 11, 2017 18 minutes ago, hoss said: It's ME who makes them Think I said to you via messenger before though If you send me back your problem one's I'll make you up some more I did have a small batch of poor eyelets which wouldn't hold on the cables properly But there was very few So by all means give me a shout and I'll give you my personal address Just been looking at the buggy one's this afternoon Sorry, do not know you made some, always used Swingy P. 1 Quote Link to comment Share on other sites More sharing options...
kenny_st Posted December 11, 2017 Author Share Posted December 11, 2017 It’s all good mark I put them in the bin, the back ones are still holding on tho, and let me know when the buggy ones are ready as I will have a set 1 Quote Link to comment Share on other sites More sharing options...
hoss Posted December 11, 2017 Share Posted December 11, 2017 3 hours ago, QRC said: Sorry, do not know you made some, always used Swingy P. That's no problem Buddy 5 minutes ago, kenny_st said: It’s all good mark I put them in the bin, the back ones are still holding on tho, and let me know when the buggy ones are ready as I will have a set I'll happily make you some replacement front's if you want Kenny But I will let you know when they're ready Any thoughts colour wise? Quote Link to comment Share on other sites More sharing options...
kenny_st Posted December 11, 2017 Author Share Posted December 11, 2017 (edited) Gotta match the colour of the outer beedlocks or a close match Edited December 11, 2017 by kenny_st 2 Quote Link to comment Share on other sites More sharing options...
kenny_st Posted December 11, 2017 Author Share Posted December 11, 2017 Shame you don’t make the quick release cable clips 1 Quote Link to comment Share on other sites More sharing options...
RCbutcher Posted December 11, 2017 Share Posted December 11, 2017 On 02/12/2017 at 10:42, Carpmart said: Looking at rcmodellzzzz website this morning. I’m always amazed in this hobby that we are happy to have to buy a product from a retailer where they say this product is of dubious build quality so we don’t honor warranty unless you strip and rebuild it! We errr no thanks! Your selling something to me of unmerchantable quality which isn’t fit for the purpose you’re selling it! Crazy! The 5th scale rc car stands are what turned me away. They are £20 ebay keyboard stands with rcmodelz stickers on. Quote Link to comment Share on other sites More sharing options...
QRC Posted December 11, 2017 Share Posted December 11, 2017 2 minutes ago, RCbutcher said: The 5th scale rc car stands are what turned me away. They are £20 ebay keyboard stands with rcmodelz stickers on. Blimey that’s harsh !!. Look abit further. 1 Quote Link to comment Share on other sites More sharing options...
hoss Posted December 11, 2017 Share Posted December 11, 2017 3 minutes ago, RCbutcher said: The 5th scale rc car stands are what turned me away. They are £20 ebay keyboard stands with rcmodelz stickers on. You're not wrong That's something they can be used for certainly But our stands are £14.99 And we buy 'Direct' from the maker of the stands, Even our Boxes have our 'RCMz' branding on them But if people choose to look at thing's in a certain way, then that is All they will ever see 2 Quote Link to comment Share on other sites More sharing options...
hoss Posted December 11, 2017 Share Posted December 11, 2017 1 hour ago, kenny_st said: Shame you don’t make the quick release cable clips Send me a PM on Facebook with what you have in mind mucker Quote Link to comment Share on other sites More sharing options...
RCbutcher Posted December 11, 2017 Share Posted December 11, 2017 (edited) Idk it was mayb a year ago. I was looking through keyboards for my kid and then searched the stands. But rcm came up with one it blew me away so i looked then i looked again at the absolute cheapest ide found and it was identical bar the rcmodelz stickers i see on rcs. I couldnt believe it. I haven't looked since tho. I wread the whole thread now it looks like a cool buggy and the servos sound intresting i think i have heard of them not these but im sure ive seen Kpower something. The wing isnt for me though. The throttle servo placement slapped me aswel but cool if it works plus nobody can say they dont design ther stuff. Well ish. The centre diff or not mayb they have an MT planned. What's the risk of no centre diff on a buggy. Or racing buggy. Ide guess its durable still since MTs dont use them. I like wheelies lol. Would a RWD conversion work better without cd too. Idk if ide ever do it but seen plenty pull out the front drive on awd rcs. Overall its a win im not buying but happy its here. I love the sc look too much tbh tho. Something about the slednecks body for me its the best around gutted losi raced it up it looked MX sport hobby rather than rc car. Hoss. So is this your buggy design or are you a distributer i saw you with the dragon hammer too. Must be an amazing job either way. Edited December 11, 2017 by RCbutcher Quote Link to comment Share on other sites More sharing options...
Popular Post hoss Posted December 11, 2017 Popular Post Share Posted December 11, 2017 Oh this Buggy is 'Definitely' not a copy of anything else that's for certain There's often bits on every model out there, that isn't to somebody's taste That's just part of the hobby And what makes it Great to have lots of different ones to choose from On this there are 'Lots' of nice touches and changes that help make it stand out With the Centre spool it may well be possible to make it RWD only, Should someone, for some reason ever fancy giving it a go No it's not my buggy Nor did I design it, but I've had a big part in the improvements And changes I felt it wanted before it's final release to the UK market The same way I did with, and still do, with the FID Dragon Hammer The testing is Great fun But it's not as easy as perhaps people expect it to be It's time very consuming, and the time differences between the UK and China often means I'm up very early in the morning speaking with them on my finding's, And explaining what to do to improve things should there be anything I feel needs it Then once anything is done, it has to be fully retested, and then reported on all over again And repeat if needed It's all worth it though to get these Crackin vehicles out for others to enjoy, and love themselves And at the end of the day, it's ALL about you guys having fun, and enjoying yourselves, and if that happens, Then I'm a Happy Bunny 4 Quote Link to comment Share on other sites More sharing options...
QRC Posted December 12, 2017 Share Posted December 12, 2017 Hopefully got a new pull start Outerwear cover arriving tomorrow and possibly a new GoPro for action shooting !!. 1 Quote Link to comment Share on other sites More sharing options...
pflatoutbj Posted December 12, 2017 Share Posted December 12, 2017 (edited) On 10/12/2017 at 21:51, QRC said: Quote what Outerwear cover did you go for Edited December 12, 2017 by pflatoutbj s Quote Link to comment Share on other sites More sharing options...
QRC Posted December 13, 2017 Share Posted December 13, 2017 5 hours ago, pflatoutbj said: One of these, expensive for what they are, but will last a very long time !!. I went for yellow. Quote Link to comment Share on other sites More sharing options...
kenny_st Posted December 13, 2017 Author Share Posted December 13, 2017 11 hours ago, QRC said: Hopefully got a new pull start Outerwear cover arriving tomorrow and possibly a new GoPro for action shooting !!. Love my hero session the app works great with it Quote Link to comment Share on other sites More sharing options...
QRC Posted December 13, 2017 Share Posted December 13, 2017 Yep went for the Hero5 Session. Quote Link to comment Share on other sites More sharing options...
kenny_st Posted December 13, 2017 Author Share Posted December 13, 2017 get yourself some sort of rubber case for it, screwed mine up on the first outing lol, them front lens are not cheap 1 Quote Link to comment Share on other sites More sharing options...
QRC Posted December 13, 2017 Share Posted December 13, 2017 And here it is, 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.