capri-boy Posted August 14, 2016 Share Posted August 14, 2016 HOBBYWING EZRUN MAX10-SCT ESC SPEED CONTROLLER The MAX10 SCT ESC is applicable to various 1/10th scale vehicles like trucks, short-course trucks, monster trucks, and etc. Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EzRun MAX10 SCT is able to deliver unmatched power and performance for even the most hardcore of racing applications, but is also responsive enough to protect itself from damage due to overloading due to physical abuse, overuse or even human error. With incredible acceleration capabilities and a rock-solid, stable output, the MAX10 SCT can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways and powering through the bumpiest terrain. The user will have the choice of adusting the ESC parameters as per his preference and ability.The waterproof and dust-proof design allows the MAX10 SCT to be used in all weather conditions without any issue of damage caused to the ESC from water or dust. You can upgrade the MAX10 SCT with the HobbyWing USB LINK software, a multifunction LCD program box and a laptop. HobbyWing updates its ESC firmware regularly giving you upgraded features more often when available. EzRun MAX10 SCT Features: High Reliability & Durability Great Flexibility & Versatility Advanced and Secure Electronic Switch Applicable to All Weather Conditions Innovative Filter Capacitor Thermal Protection Regular Firmware Updates Free of Charge Spec Check: Scale: 1/10th Brushed/Brushless:BL Sensored/Sensorless: SL Waterproof: Yes Cont./Peak Current: 120A/760A Input: 2-4S LiPo/6-12 Cells NiMH BEC Output: Switch Mode:6V/7.4V,3A Input Wires: Red-12AWG-200mm*1/Black-12AWG-200mm*1 Output Wires: Black-12AWG-200mm*3 Input Connectors: No Output Connecotors: 4.0 Bullet Connectors (Female) Fan Size: 25.0x25.0x10.0mm Fan Voltage Range: 5-7.4V WiFi Module: Supported Program Port: FAN/Program Port Size: 49.0x39.5x34.7mm Weight: 105g Applications Motors SL BL Motors/SD BL Motors(only in SL mode) Vehicles 1/10thSCTs/Truck/Monster Truck KV Rating/T Count 2S LiPo:KV≤6000;3S LiPo:KV≤4000;4S LiPo:KV≤3000(36XX Series of Motors) Part Number: HW30102601 - Source View full news article Quote Link to comment Share on other sites More sharing options...
Tug Posted August 14, 2016 Share Posted August 14, 2016 So will this replace the famous SC8? Quote Link to comment Share on other sites More sharing options...
Deafty Posted August 14, 2016 Share Posted August 14, 2016 (edited) Sensored it says,.. this is the 1st Ezrun to be sensored? edit:// no just sensored motors running sensorless,. oh well. times they aren't changing. Edited August 14, 2016 by Deafty Quote Link to comment Share on other sites More sharing options...
Oh How Original Posted August 14, 2016 Share Posted August 14, 2016 Pity it's not sensored. Quote Link to comment Share on other sites More sharing options...
.AJ. Posted August 15, 2016 Share Posted August 15, 2016 Why would they make it sensored tho? The Xeruns have that covered...... Quote Link to comment Share on other sites More sharing options...
atom3624 Posted August 15, 2016 Share Posted August 15, 2016 The way I read the specifications it says ... Brushed / brushless: BL Sensored / sensorless: SL It indicates normal options then clarifies - its brushless and its sensorless. Al. Quote Link to comment Share on other sites More sharing options...
capri-boy Posted August 15, 2016 Author Share Posted August 15, 2016 12 hours ago, Tug said: So will this replace the famous SC8? Considering the price drops and 'dumping' of the SC8 i'd say that's highly likley. If you compare the specs it's very similar the the SC8 - upto 4s and 120a/760a burst. I'd expect it to work just fine anywhere the SC8 did. Quote Link to comment Share on other sites More sharing options...
dazp1976 Posted August 15, 2016 Share Posted August 15, 2016 Makes me laugh. Billed as a 1/10th esc and still better spec than the one in the HPI 1/8 Trophy series Shows how under par rtr electronics are Nice looking upgrade of the SC8 that can utilize a HV servo Quote Link to comment Share on other sites More sharing options...
Tug Posted August 15, 2016 Share Posted August 15, 2016 But isn't the Xerun slowly disappearing? They don't seem as readily available as they once were, or is it just me? I just feel that Hobbywing is replacing their old line up with these new Max series. That's fine, all except the odd cell count issue. Quote Link to comment Share on other sites More sharing options...
.AJ. Posted August 15, 2016 Share Posted August 15, 2016 They have just brought out the Xerun XR8 Plus and the XR10 pro, which are both highend sensored ESC's and there is also a XR10 SCT on the way..... Quote Link to comment Share on other sites More sharing options...
dazp1976 Posted August 15, 2016 Share Posted August 15, 2016 2 hours ago, Tug said: But isn't the Xerun slowly disappearing? They don't seem as readily available as they once were, or is it just me? I just feel that Hobbywing is replacing their old line up with these new Max series. That's fine, all except the odd cell count issue. And I don't know what the rest are like but my Max 8 only had LVC "low, medium, high" no voltages. Didn't like that. Quote Link to comment Share on other sites More sharing options...
Tug Posted August 15, 2016 Share Posted August 15, 2016 2 hours ago, dazp1976 said: And I don't know what the rest are like but my Max 8 only had LVC "low, medium, high" no voltages. Didn't like that. Yeah, I'm not keen on that system either, but it seems to work. Quote Link to comment Share on other sites More sharing options...
mydoddy69 Posted August 15, 2016 Share Posted August 15, 2016 Oh these look nice. 7.4v Bec should work nice with today's power hungry servos Wifi module ? Is there an app out then for these Max seriers esc ? Seems like a step in the right direction if you ask me even looks nicer than the old sc8 IMO If I was in the market for a new 120a esc I'd deffiently be looking at one of these and I'd happily pay a little extra so I didn't have to run an external Bec to run high powered servos Quote Link to comment Share on other sites More sharing options...
.AJ. Posted August 15, 2016 Share Posted August 15, 2016 The wifi app is only for iOS at the moment 1 Quote Link to comment Share on other sites More sharing options...
mydoddy69 Posted August 15, 2016 Share Posted August 15, 2016 That's it I'm sold Quote Link to comment Share on other sites More sharing options...
Tug Posted August 15, 2016 Share Posted August 15, 2016 Who'd buy you? 1 Quote Link to comment Share on other sites More sharing options...
RCbutcher Posted August 15, 2016 Share Posted August 15, 2016 Does the new pc stuff Inc data. Quote Link to comment Share on other sites More sharing options...
.AJ. Posted August 15, 2016 Share Posted August 15, 2016 The only HW ESC to have data logging is the XR10 pro 1 Quote Link to comment Share on other sites More sharing options...
mydoddy69 Posted August 30, 2016 Share Posted August 30, 2016 The wire I circled in red monitors the motor temp on motors that except the plug so does that mean will be getting new motors to match this esc in a combo like the sc8 or are these motors already out ? Quote Link to comment Share on other sites More sharing options...
Jforce Posted August 30, 2016 Share Posted August 30, 2016 (edited) Got one of these in May from France for my Slash to replace a failed CC MMP, really happy with it so far, was going to get a SC8 but this was £5 more and newer so decided to give it a go, really good so far seems a lot better and tougher than the castle and WP. The extra capacitors are for use if the capacitors are constantly above 85C You can download the Android wifi express app directly from Hobbywing, you just have to manually install it, and just a bit buggy. Edited August 30, 2016 by Jforce Quote Link to comment Share on other sites More sharing options...
mydoddy69 Posted August 30, 2016 Share Posted August 30, 2016 3 hours ago, Jforce said: Got one of these in May from France for my Slash to replace a failed CC MMP, really happy with it so far, was going to get a SC8 but this was £5 more and newer so decided to give it a go, really good so far seems a lot better and tougher than the castle and WP. The extra capacitors are for use if the capacitors are constantly above 85C You can download the Android wifi express app directly from Hobbywing, you just have to manually install it, and just a bit buggy. Yours dosent have that wire I circled on it tho so did you unplug it or was it just not there ? Quote Link to comment Share on other sites More sharing options...
Jforce Posted August 30, 2016 Share Posted August 30, 2016 Wasn't there, but I'll double check in the box when I get home. Quote Link to comment Share on other sites More sharing options...
HellaFlush Posted August 30, 2016 Share Posted August 30, 2016 Wait is there a WiFi app thingy built in to all the MAX series? Or do you have to buy something separate? Quote Link to comment Share on other sites More sharing options...
.AJ. Posted August 30, 2016 Share Posted August 30, 2016 You need one of these... I done the latest firmware update on my XR8 at the weekend and I've now got data logging, it's only temps and voltage for now tho Quote Link to comment Share on other sites More sharing options...
RCbutcher Posted August 30, 2016 Share Posted August 30, 2016 It's the rpm speed ect ide like for logging. Then we can test motors against each other with ease. I want to see how much better castle motors are over hobbywing or Leppard or if at all. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.